• Proceedings of the Korean Society of Food Hygiene and Safety Conference
• /
• 1992.07a
• /
• pp.33-45
• /
• 1992

The sanitation inspection is the most frequently used procedure to protect foods prepared in foodservice establishments. In order to enhance foodservioe inspections and to improve post-inspection remedial measures, more practical evaluation methods for sanitation are required. The HACCP approach is based upon factors which contribute to foodborne disease rather than on factors which relate to aesthetics. Contributing factors for foodborne disease from foodservice establishments reported in USA, Canada, and England were analyzed to identify potential hazards during practical foodservioe operations. Hazards were classified at critical control points by risk ranking. Twenty-two observable practical indicators relating to each contributing factor were selected and adjusted to standardized procedures and hazard determiners at critical contral points. The weights for each inspection item were ranked as 1, 2, 3, 4 or 5 according to the risk level of contributing factors. And also application for the inspection item in different 6 types of work procedures was suggested for the use of specialized foodservice establishment and cafeteria, and of manager's self inspection in each establishment.

• Journal of the Korean Society of Safety
• /
• v.15 no.4
• /
• pp.101-111
• /
• 2000

In order to introduce P.S.M. system adequate to domestic construction first, many cases similar to advanced foreign P.S.M. system have been collected and compared to the domestic situation. Then, the current safety management status of bridges, subways, apartment and office building construction are investigated while visiting interview, using questionnaire at site have being done. The potential hazard and measurement have been investigated for each kind of works, and the domestic introducing method of P.S.M. system is analyzed with expert discussion. In order to represent how to make out P.S.M. plan, the questionnaire is made out using each five place for bridge, subways, apartment and office building. As the weight factor for potential hazard of each work obtained from more than forty site places, is produced and shown. Also, a direction the recommendation is suggested to improve tool in each construction site with work schedule. It is thought that proposed schedule contributed to keeping in safe business administration of each company in decreasing many effort at the construction site.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.33-36
• /
• 2007

This study shows the basic data for setting up a response modification factor of unreinforcement masonry structure by considering and analyzing the experiment results of the domestic walls. If the result of this study compare with the value R of KBC-2005, 1.5, the average value, 1.2, is the low value. However, the maximum value, 2.57, is more than 70% bigger than the standard value. The standard value of overstrength factor, 2.5 is judged to have relatively bigger value than this study.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.376-379
• /
• 2007

In recent years, the natural damage associated with flood disaster has been dramatically increased. However, there is no rational method which reflects urban characteristics to estimate the regional safety assessment for flood disaster. The purpose of this study is to develop the regional safety assesment model for urban flood. Flood risk and reduction assesment were estimated by using the linear sum of the Z score of the assessment factors and the weight value of each factor from the expert survey data. And then the regional safety assessment was estimated by subtracting reduction factor value from risk factor value. GIS tool was used to estimate the factor assesment and integrated regional safety. This study can be used to determine the priority of flood protection project, execute the flood insurance and establish the urban plans and the flood mitigate plan.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.33-36
• /
• 2008

In Korean Building Code 2005(KBC-2005), the Seismic Zone Factor is regulated by separating the seismic zone into two part. This seismic zone factor is not matched to regional seismic characteristics of our country because the factor is based on International Building Code 2000 (IBC-2000) of USA. This study inquiry for having a sufficient grasp of the seismic characteristics of south Korea region and appling for the seismic cope plan. We have collected and analyzed earthquake record happened in domestic region. There are two kinds of earthquake record. One is Historical earthquake data, another is Instrumental earthquake data. I used Instrumental earthquake record data which reliance is higher than historical earthquake data for proposing attenuation formulas by analyzing a correlation the epicenter and the distance.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.679-682
• /
• 2008

Probability precipitation is one of the most important factor for designing the hydrology structures. Probability precipitation is calculated based on the frequency analysis on each durations of annual maximum rainfall data. For frequency analysis we need a conversion factor between the rain data per random-time interval and fixed-time-interval. In this study, the minutely precipitation data on observatory of the Meteorological Administration are used for 37 stations. Therefore, we should conversion factors between the rain data per minute and fixed-time-interval.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2219-2231
• /
• 2012

This study conducted to investigate incidence rate and association of serum lipid profiles with incidence of ischemic heart disease. Study subjects consisted of 417,642 adults aged 30 years and over, who underwent physical examination and responded to questionnaire from health examination center of 19 university general hospitals. Hazard ratio of risk factor for ischemic heart disease (IHD) were calculated by Cox's proportional hazard regression model adjusted for ages, BMI and lifestyle (drinking, smoking and exercising). For TC/HDL ratio, hazard ratio of IHD in male increased from 1.21 times to 1.84 times increase with TC/HDL ratio, and that in female also increased from 1.26 times to 1.86 times. For TG/HDL ratio, hazard ratio of IHD in male increased from 1.17 times to 1.49 times increase with TG/HDL ratio, and that in female also increased from 1.42 times to 1.97 times. For LDL/HDL ratio, hazard ratio of IHD in male increased from 1.26 times to 1.82 times increase with LDL/HDL ratio, and that in female also increased from 1.26 times to 1.68 times. In conclusion serum lipid indexes are the significant risk factors for cardiovascular diseases. The higher the concentration of TC, LDL and TG is, the lower the concentration of HDL is, hazard ratio for IHD increased. Ratio of TC/HDL, TG/HDL and LDL/HDL were also verified to be significant risk factors for IHD.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.10
• /
• pp.5-14
• /
• 2017

The hazard maps for predicting collapse on natural slopes consist of a combination of topographic, hydrological, and geological factors. Topographic factors are extracted from DEM, including aspect, slope, curvature, and topographic index. Hydrological factors, such as soil drainage, stream-power index, and wetness index are most important factors for slope instability. However, most of the urban areas are located on the plains and it is difficult to apply the hazard map using the topography and hydrological factors. In order to evaluate the risk of subsidence of flat and low slope areas, soil depth and groundwater level data were collected and used as a factor for interpretation. In addition, the reliability of the hazard map was compared with the disaster history of the study area (Gangnam-gu and Yeouido district). In the disaster map of the disaster prevention agency, the urban area was mostly classified as the stable area and did not reflect the collapse history. Soil depth, drainage conditions and groundwater level obtained from boreholes were added as input data of hazard map, and disaster vulnerability increased at the location where the actual subsidence points. In the study area where damage occurred, the moderate and low grades of the vulnerability of previous hazard map were 12% and 88%, respectively. While, the improved map showed 2% high grade, moderate grade 29%, low grade 66% and very low grade 2%. These results were similar to actual damage.

• Journal of Korean Society for Quality Management
• /
• v.31 no.4
• /
• pp.226-238
• /
• 2003

Recently, The problems with which our country's company is confronted for business of manufacturing goods. This study set the hypothesis to develop the method that was analysis and application of A reliability evaluation method of environmental material for circuit components in Computer, Color TV, Monitor, Microwave oven, Electric Refrigerator, Automobile parts, other goods. Especially, this study emphasis on regulate export of the EU and North America that it's a environmental material's hazards problem. In this process, this study set the pattern of practical application. Therefore, this study emphasis on the application of A reliability evaluation method of environmental material and the use of other parameters by environmental reliability test data. The result of this study is as follows. 1) There is relationship between regulate material and technical protecting system. 2) Characteristics of hazard materials is operating a healthcare damage factor as well as regulate environmental factors.

• International Journal of Reliability and Applications
• /
• v.9 no.1
• /
• pp.113-122
• /
• 2008

In this paper, we consider a periodic preventive maintenance policy in which each preventive maintenance reduces the hazard rate of amount proportional to the failure intensity, which increases since the system started to operate. And the effect of preventive maintenance at each preventive maintenance epoch is different. The expected cost rate per unit time for the proposed model is obtained. We discuss the optimal number N of the periodic preventive maintenance and the optimal period x, which minimize the expected cost rate per unit time and obtain the optimal preventive maintenance schedule for given cost structures of the model. A numerical example is given for the purpose of illustrating our results when the failure time distribution is Weibull distribution.