• Journal of Korean Society of Disaster and Security
• /
• v.6 no.1
• /
• pp.35-45
• /
• 2013

In recent years, increasing damage due to landslides. So the government is to create a geotechnical hazard map. This study was to evaluate the applicability of the geotechnical hazard map by using 4 years of landslide cases in Seoul and Busan. And the in-situ aseessment has been carried out in test-bad area with specialists. Study has shown dangerous grade in geotechnical hazard map is more dangerous than the actual. Thus we can utilize geotechnical hazrd map in the purpose of the geotechnical hazard preliminary assessment. However, the in-site inspection and evaluation is required for in order to select the hazard area.

• Journal of the Korean Institute of Gas
• /
• v.22 no.4
• /
• pp.27-31
• /
• 2018

Classification of explosion hazard areas is very important in terms of cost and safety in the workplace handling flammable materials. This is because the radius of the hazardous area determines whether or not the explosion-proof equipment is installed in the electrical machinery and apparatus. From November 6, 2017, KS C IEC-60079-10-1: 2015 will be issued and applied as a new standard. It is important to understand and apply the difference between the existing standard and the new standard. Leakage coefficients and compression factors were added to the leakage calculation formula, and the formula of evaporation pool leakage, application of leakage ball size, and shape of explosion hazard area were applied. The range of the safety factor K has also been changed. Also, in the radius of the hazardous area, the existing standard applies the number of ventilation to the virtual volume, but the revised standard is calculated by using the leakage characteristic value. In this study, we investigated the differences from existing standards in terms of ventilation and dilution and examined the effect on the radius of the hazard area. Comparisons and analyzes were carried out by applying revised standards to workplaces where existing explosion hazard locations were selected. The results showed that even if the ventilation and dilution were successful, the risk radius was not substantially affected.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.2
• /
• pp.9-23
• /
• 1999

Pusan's reputation as the nation's most crowded city in terms of population density is attributable to its huge mountains which allow only small portion of residential area to its large population. Rapid increase of urban population on limited amount of land had naturally led its developments efforts to mountainous area giving rise to the concern of potential landslide. This study on urban Pusan and "Landslide Hazard Map" thereof is prepared in an attempt to avoid disasters created by landslide and also as a reference for city planners. The Map shows that the area covering 38% to 43% of urban Pusan has the potential for landslide. The study also shows that various civil works involving massive land excavation had been more direct cause of landslides in Pusan than such traditional factors as locations, ground slopes, rock types and topography of the area concerned.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.2
• /
• pp.1-10
• /
• 2009

Recently the large scale of forest disaster such as landslide and forest fire gives a very bad impact on not only forest ecosystem but also farm business so that it has became the main issue of environmental problems. In this study, the landslide hazard area forecast method was developed by considering not only the topographic thematic maps based on GIS and satellite images but also amount of rainfall data, which are very important factors of landslide. Uljin-gun was selected as the study area and the GIS weight score and overlay analysis were applied to topographical map and meteorological observation map. Finally the landslide area distribution map was constructed by considering the evaluation criteria. Also, the accuracy could be acquired by comparing the landslide hazard area forecast map and real damaged area extracted from satellite image.

• Magazine of the Korean Society of Hazard Mitigation
• /
• v.2 no.4 s.7
• /
• pp.40-47
• /
• 2002

Since it is important to understand the bio-climatic change in Seoul for ecological city planning in the future, this paper gives an overview on bio-climate analysis of urban environments at Seoul. We analyzed its characteristics in recent years using the observations of 24 of Automatic Weather Station (AWS) by Korea Meteorological Administration (KMA). In urbanization, Seoul metropolitan area is densely populated and is concentrated with high buildings. This urban activity changes land covering, which modifies the local circulation of radiation, heat and moisture, precipitation and creating a specific climate. Urban climate is evidently manifested in the phenomena of the increase of the air temperature, called urban heat Island and in addition urban sqall line of heavy rain. Since a city has its different land cover and street structure, these form their own climate character such as climate comfort zone. The thermal fold in urban area such as the heat island is produced by the change of land use and the air pollution that provide the bio-climate change of urban eco-system. The urban wind flow is the most important climate element on dispersion of air pollution, thermal effects and heavy shower. Numerical modeling indicates that the bio-climatic transition of wind wake in urban area and the dispersion of the air pollution by the simulations of the wind variation depend on the urban land cover change. The winds are separately simulated on small and micro-scale at Seoul with two kinds of kinetic model, Witrak and MUKLIMO.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.2
• /
• pp.31-39
• /
• 2017

Classify of explosion hazardous areas must be made at the site where flammable materials are used. This reason is that it is necessary to manage ignition sources in of explosion hazardous areas in order to reduce the risk of explosion. If such an explosion hazard area is widened, it becomes difficult to increase the number of ignition sources to be managed. The method using the virtual volume currently used is much wider than the result using CFD(Computational Fluid Dynamics). Therefore, we tried to improve the current method to compare with the new method using leakage characteristics. The result is a realistic explosion hazard if the light gas is calibrated to the mass and the heavy gas is calibrated to the lower explosion limit. However, it is considered that the safety factors should be taken into account in the calculated correction formula because such a problem should be considered as a buffer for safety.

• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.169-169
• /
• 2009

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.2
• /
• pp.155-163
• /
• 2008

This paper presents a novel framework for analysis of power system wide-area blackout based on so called fault cascading scenarios. For a given power system operating state, "triggering" faults or a "seed faults" are chosen based on the probabilities estimated from the hazard rates. The fault probabilities reflect both the load and the weather conditions. Effects of hidden failures in protection systems are also reflected in establishing the fault propagation scenarios since they are one of the major causes for the wide-area blackouts. A tree type data structure called a PS-BEST(Power System Blackout Event Scenario Tree) is proposed for construction of the fault cascading scenarios, in which nodes represent various power system operating states and the arcs are the events causing transitions between the states. Arcs can be either probabilistic or deterministic. For a given initial fault, the total probability of leading to wide-area blackout is estimated by aggregating the individual probability of each fault sequence route leading to wide-area blackout. A case study is performed on the IEEE RTS-79(24 bus) system based on the fault data presented by the North American Electrical Reliability Council(NERC). Test results demonstrate the potentials and the effectiveness of the proposed technique for the future wide-area blackout analysis.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.2
• /
• pp.47-56
• /
• 2004

The purpose of this study is to estimate soil loss amount according to the rainfall-runoff erosivity factor frequency and to analyze the hazard zone that has high possibilities of soil erosion in the watershed. RUSLE was used to analyze soil loss quantity. The study area is Gwanchon that is part of Seomjin river basin. To obtain the frequency rainfall-runoff erosivity factor, the daily maximum rainfall data for 39 years was used. The probability rainfall was calculated by using the Normal distribution, Log-normal distribution, Pearson type III distribution, Log-Pearson type III distribution and Extreme-I distribution. Log-Pearson type III was considered to be the most accurate of all, and used to estimate 24 hours probabilistic rainfall, and the rainfall-runoff erosivity factor by frequency was estimated by adapting the Huff distribution ratio. As a result of estimating soil erosion quantity, the average soil quantity shows 12.8 and $68.0ton/ha{\cdot}yr$, respectively from 2 years to 200 years frequency. The distribution of soil loss quantity within a watershed was classified into 4 classes, and the hazard zone that has high possibilities of soil erosion was analyzed on the basis of these 4 classes. The hazard zone represents class IV. The land use area of class IV shows $0.01-5.28km^2$, it ranges 0.02-9.06% of total farming area. Especially, in the case of a frequency of 200 years, the field area occupies 77.1% of total fanning area. Accordingly, it is considered that soil loss can be influenced by land cover and cultivation practices.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.1 s.28
• /
• pp.69-77
• /
• 2004

Since there are a lot of changes in climate on domestic and natural disasters owing to the disturbance-development of the land, damages of properties and human life frequently occur due to the coastal floodings. Accordingly, it is necessary to find the area where the danger of flooding coasts is relatively high and to inform resident the characteristics of the area As a part of preventive land management to minimize the flooding damages of the coastal area, this study suggested the generation of the coastal flood hazard map that provides detailed information such as refuge path, a place of refuge, and the location of medical supplies, food, and main rescue equipment, etc. This study selected the southern region of Daebu-do as an exemplary area, conducted a document study to establish GIS data, secured pre-structured data, and suggested the method of establishing GIS data fit to the study area. In particular, it emphasized the efficient construction of the geographical spatial data that were accurate, economic, objective, and realistic in supporting the modeling to predict the flooding zone. The specific type of established database was divided into flooding risk area, flooding warning area, and flooding-volume area. The prototype of coastal flood hazard map can be widely used for efficient disaster management. Furthermore, it is considered that the map could be applied for arousing residents' attentions to the flooding, prior education, and local governments' management actions against the danger of flooding.