• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1956-1964
• /
• 2018

Since the stator winding of High-Speed Permanent Magnet Generator (HSPMG) has few winding turns and low inductance value, it is more prone to be influenced by harmonic current. Moreover, the operation efficiency and the torque stability of HSPMG will be greatly influenced by harmonic current. Taking a 117 kW, 60 000 rpm HSPMG as an example, in order to analyze the effects of harmonic current on HSPMG in this paper, the 2-D finite element electromagnetic field model of the generator was established and the correctness of the model was verified by testing the generator prototype. Based on the model, the losses and torque of the generator under different frequency harmonic current were studied. The change rules of the losses and torque were found out. Based on the analysis of the influence of the harmonic phase angle on torque ripple, it is found that the torque ripple could be weakened through changing the harmonic phase angle. Through the analysis of eddy current density in rotor, the change mechanism of the rotor eddy current loss was revealed. These conclusions can contribute to reduce harmonic loss, prevent demagnetization fault and optimize torque ripple of HSPMG used in distributed power supply system.

• 대한전자공학회논문지TC
• /
• 제40권7호
• /
• pp.293-299
• /
• 2003

본 논문에서는 0.1 ㎛ GaAs PHEMTs MIMIC 공정을 이용하여 V-band에서 사용 가능한 고 성능의 sub-harmonic mixer를 제안하였다. LO신호의 n차 하모닉 성분을 이용하기 위해서는 LO신호 전력의 필연적인 감쇠가 있다. 이러한 단점을 극복하기 위하여 본 논문에서는 주파수를 혼합하기 위한 APDP(anti-parallel diode pair) 구조에 0.1 ㎛ PHEMT (pseudomorphic high electron mobility transistors)를 각 단에 연결시켜 LO 신호의 4차 성분을 이용하는데 있어 주요한 성능 향상을 이루었다. PHEMT 다이오드 와 PHEMT를 0.1 ㎛의 게이트 길이를 갖는 동일 공정을 통하여 구현하였고 CPW (Coplanar Waveguide) 라이브러리를 개발하여 제안된 회로를 설계하였다. 또한 상대적으로 낮은 주파수의 출력 IF 단에는 출력 주파수의 선택성을 좋게 하기 위하여 Lumped 소자를 이용하여 정합회로를 구성하여 RF 입력 신호와 LO 신호의 출력단 유입을 억제하였다. 제작된 sub-harmonic mixer의 특성을 측정한 결과 입력 RF 주파수가 60.4 ㎓, LO 주파수가 14.5 ㎓일 때, 0.8 ㏈의 변환이득 특성을 얻었으며, LO-to-IF, LO-to-RF 격리 특성을 측정한 결과 동작영역에 걸쳐 50 ㏈ 이상의 높은 격리 특성을 나타내었다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권3호
• /
• pp.145-148
• /
• 2015

In this letter, we present a new linearization method for a voltage controlled oscillator (VCO)-based quantizer in an analog-to-digital converter (ADC). The nonlinearity of the VCO generates unwanted harmonic spurs and reduces the signal-to-noise and distortion ratio (SNDR) of the VCO-based quantizer. This letter suggests a frequency-to-current feedback method to effectively suppress harmonic distortion. The proposed method decreases the harmonic spurs by more than 53 dB. And a VCO-based quantizer employing the proposed linearization method achieves a high SNDR of 74.1 dB.

• 한국전자파학회논문지
• /
• 제13권4호
• /
• pp.379-385
• /
• 2002

본 논문에서는 MESFET을 이용하여 8 GHz 대역 국부발진기용 주파수 3체배기를 설계 및 제작하였다. A급에 동작점을 두어 3차 하모닉 성분을 발생시켰고, λ$_{g}$/2 개방형 스터브와 대역통과 여파기를 이용하여 기본주파수와 2차 하모닉성분을 억제하였다. 측정결과 0 ㏈m 입력신호에 대해 출력주파수인 8.31 GHz에서의 변환이 득은 2.67 ㏈, -41.17 ㏈c의 고조파 쳐압 특성을 얻었다. 또한 -3 ㏈ 이상의 변환이득을 갖는 대역폭은 510 MHz로 나타났다.다.

• 한국전자통신학회논문지
• /
• 제15권5호
• /
• pp.827-834
• /
• 2020

본 연구는 주파수 체배기 이론을 이용하여 초고주파 항공용 레이다를 위한 3차 고조파 믹서 설계에 대한 연구이다. 기본 믹서 설계 방법과는 달리 주파수 체배기 이론을 이용하여 국부 주파수(LO)의 3차 고조파 성분이 최대가 되는 게이트 바이어스 전압을 선택하여 중간주파수(IF)에서 3차 고조파 혼합(mixing) 성분이 최대가 되도록 하였다. 제안한 고조파 믹서는 플라스틱 패키지의 상용 GaAs MESFET 소자를 이용하여 설계 및 제작하여 기존 초고주파 믹서의 높은 변환손실, 회로 복잡성, 높은 가격 및 제작 복잡도를 개선할 수 있었다. 제안한 설계 방법을 이용한 3차 고조파 믹서는 33 GHz ~ 36 GHz 대역에서 8 ~10 dB 변환손실 특성 및 0 dBm 선형성 (P1dB) 특성을 나타내었다.

• 한국전자파학회논문지
• /
• 제17권8호
• /
• pp.719-724
• /
• 2006

본 논문에서는 Half-LO 주파수를 이용하는 새로운 방식의 double-conversion down mixer를 2.3 GHz 대역에서 설계하였다. 제안된 mixer에서는 Half-LO 주파수를 2개의 HEMT에 인가하여 두 HEMT에서의 변환 방식을 gate type과 resistive type으로 다르게 함으로서 IF 주파수를 얻게 된다. 기존의 sub-harmonic mixers와 같이 Half-LO 주파수를 사용하지만 제안된 mixer는 Half-LO의 second harmonic 성분을 이용하지 않고 Half-LO의 기본 주파수를 이용하여 주파수 변환을 하고 두 번째 HEMT에서 Resistive mixer type으로 IF 신호를 얻기 때문에 기존의 능동 mixer보다 향상된 선형성을 얻을 수 있다. 2.3 GHz 대역에서 설계 제작된 mixer는 Half-LO 전력 10 dBm을 이용하여 5dB의 변환 손실과 16.25dBm의 IIP3 특성을 얻을 수 있었다.

• 한국통신학회논문지
• /
• 제21권12호
• /
• pp.3215-3226
• /
• 1996

In this paper a K-band harmonic oscillator competitive to ordinary Push-Push type oscillators is introduced. This oscillator is composed of two-X-band dielectric resonance circuits. To favor its harmonic generation, the load effect and the bias effect are studied to allow the maximum harmonic distortion. As results, the dielectric resonated load and the class A bias are used for the 2nd harmonic generation. analytical study for modelling of voltage controlled dielectric resonator is carried out with theoretical background. The performance of the circuit is evaluated by simulation using harmonic balanced method. The novel structure has ont only a voltage tuning circuit but also an output port at fundamental frequency as the function of prescaler for phase lockede loop application on the just single oscillation structure. In experimentation, the output freqneyc of the 2nd harmonic signal is 20.5GHz and the maximum power level of output is +5.5dBm without additional post amplifiers. the harmonic oscillator exhibits -30dBc of high fundamental frequency rejection without added extra filters. The phase noise of -90dBc/Hz at 100kHz off-carrier has been achieved under free running condition, that satisfies phase noise requirement of IESS 308. The proposed oscillator may be utilized as the clean and stable fixed local oscillator in Transmit Block Upconvertor(TBU) or Low oise Block downconvertor(LNB) for K/Ka-band digital communications and satellite broadcastings.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.82-86
• /
• 2004

This research is about the result of leakage current waveform about the situation of surface leakage current and environmental changes(Salt fog, clean fog and rain) by EPDM polymer insulators' amount of salt. The researcher presents the result of changing about fundamental harmonic, 3rd harmonic and 5th harmonic from starting point of supplying power to flashover. In this study, researched environmental affects (clean fog, salt fog and rain) about surface aging of polymer insulators and used frequency spectrum of leakage current waveform to develop the diagnostic technique of surface aging. When amount of salt contents changed, surface aging stage and the degree of aging (distortion factor) about 3rd and 5th harmonic waveform on low frequency harmonic wave. The distortion factor which is harmonic percentage about basic harmonic is important pointer to evaluate the surface condition of polymer insulators.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.560-574
• /
• 2016

This paper presents a novel method for power system harmonic estimation based on the Park transform. The proposed method firstly extends the signal to a group of three-phase signals in a-b-c coordinate. Then, a linear fitting based method is adopted to estimate the fundamental frequency. Afterwards, the Park transform is utilized to convert the three-phase signals from a-b-c coordinate to d-q-0 coordinate. Finally, the amplitude and phase of a harmonic component of interest can be calculated using the d-axis and q-axis components obtained. Simulation studies have been conducted using matrix laboratory (MATLAB) and power system computer aided design/electromagnetic transients including direct current (PSCAD/EMTDC). Simulation studies in MATLAB have considered three scenarios, i.e., no-frequency-deviation scenario, frequency-deviation scenario and the scenario in the presence of inter-harminics. The results have demonstrated that the proposed method achieves very high accuracy in frequency, phase and amplitude estimation under noisy conditions, and suffers little influence of the inter-harmonics. Moreover, comparison studies have proved that the proposed method is superior to FFT and Interpolated FFT with the Hanning Window (IpFFTHW). Finally, a popular case in PSCAD/EMTDC has been employed to further verify the effectiveness of the proposed method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.688-695
• /
• 2000

This study presents an approach to model and to analyse traction power feeding system focused on the amplification of harmonic current. Through the research we can conclude the following: - The resonance frequency is not depend on the location of vehicle. The magnification of harmonic is, however, a function of the position of a train. - The resonance frequency is lower as catenary length is longer.