• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.52 no.3
• /
• pp.121-126
• /
• 2003

In this paper, we propose the haptic system for the real-time virtual environment-control, which controls the sense of sight, hearing and touch. In order to maintain the stable haptic system in this study, we apply the proxy force rendering algorithm and the real-time graphic deformation algorithm based on the FEM. The applied proxy algorithm makes the system possible to be more stable and prompt with a virtual object. Moreover, the haptic rendering algorithm is applied to work out a problem that the tactual transaction-period is different from the graphic transaction- period. The graphic deformation algorithm is developed in the real-time using the deformed FEM. To apply the FEM, a deformed material-model is produced and then the graphic deformation with this model is able to force. Consequently, the graphic rendering algorithm is deduced by the real-time calculation and simplification because the purpose of this system is to transact in the real time. Applying this system to the PC, we prove that it is possible to deform the graphics and transact the haptic. Finally we suggest the variable simulation program to show the efficiency of this system.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.122-128
• /
• 2009

In this paper, we present a design and an evaluation of a hand-held ball based haptic interface, named "TouchBall." Using a trackball mechanism, the device provides flexibility in terms of directional degrees of freedom. It also has an advantage of a direct transfer of force feedback through frictional touch (with high sensitivity), thus requiring only relatively small amount of inertia. This leads to a compact hand-held design appropriate for mobile and 3D interactive applications. The device is evaluated for the detection thresholds for directions of the force feedback and the perceived amount of directional force. The refined directionality information should combine with other modalities with less sensory conflict, enriching the user experience for a given application.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1031-1036
• /
• 2006

햅틱 분야는 디스플레이 되는 콘텐츠를 만질 수 있게 촉감을 제공함으로써 의학, 교육, 군사, 방송 분야 등에서 널리 연구되고 있다. 이미 의학 분야에서는 Reachin 사(社)의 복강경 수술 훈련 소프트웨어와 같이 실제 수술 할 때와 같은 힘을 느끼면서 수술 과정을 훈련할 수 있는 제품이 상용화 되어 있다. 그러나 햅틱 분야가 사용자에게 시청각 정보와 더불어 추가적인 촉감을 제공함으로써 보다 실감 있고 자연스러운 상호작용을 제공하는 장점을 가진 것에 비해 아직은 일반 사용자들에게 생소한 분야다. 그 이유 중 하나로 촉감 상호작용이 가능한 콘텐츠의 부재를 들 수 있다. 일반적으로 촉감 콘텐츠는 컴퓨터 그래픽스 모델로 이루어져 있어 일반 그래픽 모델러를 사용하여 콘텐츠를 생성하나 촉감과 관련된 정보는 콘텐츠를 생성하고 나서 파일에 수작업으로 넣어주거나 각각의 어플리케이션마다 직접 프로그램을 해주어야 한다. 이는 그래픽 모델링과 촉감 모델링이 동시에 진행되지 않기 때문에 발생하는 문제로 촉감 콘텐츠를 만드는데 시간이 많이 소요되고 촉감 정보를 추가하는 작업이 직관적이지 못하다. 그래픽 모델링의 경우 눈으로 보면서 콘텐츠를 손으로 조작할 수 있으나 촉감 모델링의 경우 손으로 촉감을 느끼면서 동시에 조작도 해야 하기 때문에 이에 따른 인터페이스가 필요하다. 본 논문에서는 촉감 상호작용이 가능한 촉감 콘텐츠를 직관적으로 생성하고 조작할 수 있게 하는 촉감 모델러를 기술한다. 촉감 모델러에서 사용자는 3 자유도 촉감 장치를 사용하여 3 차원의 콘텐츠를 실시간으로 만져보면서 생성, 조작할 수 있고 촉감 사용자 인터페이스를 통해서 콘텐츠의 표면 촉감 특성을 직관적으로 편집할 수 있다. 촉감 사용자 인터페이스는 마우스로 조작하는 기존의 2차원 그래픽 사용자 인터페이스와는 다르게 3 차원으로 구성되어 있고 촉감 장치로 조작할 수 있는 버튼, 라디오 버튼, 슬라이더, 조이스틱의 구성요소로 이루어져 있다. 사용자는 각각의 구성요소를 조작하여 콘텐츠의 표면 촉감 특성 값을 바꾸고 촉감 사용자 인터페이스의 한 부분을 만져 그 촉감을 실시간으로 느껴봄으로써 직관적으로 특성 값을 정할 수 있다. 또한, XML 기반의 파일 포맷을 제공함으로써 생성된 콘텐츠를 저장할 수 있고 저장된 콘텐츠를 불러오거나 다른 콘텐츠에 추가할 수 있다.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.225-229
• /
• 2006

햅틱 인터페이스 장치는 가상공간 상에서 얻어지는 시각적 효과와 더불어 힘(촉각)을 전달하여 사용자에게 현실감을 줄 수 있는 장치이다. 본 논문에서는 다양한 용도로 사용할 수 있는 2 차원 햅틱 인터페이스 장치를 설계 및 제작하고, 입체영상 시스템과 연동하여 오락실에서 흔히 볼 수 있는 에어하키 시스템을 가상현실 기술로 구현하였다. 이때 적절한 모델링과 햅틱 렌더링을 통하여 가상 에어하키 공을 칠 때 사용자가 핸들을 잡은 손으로 느끼는 충격과 반력을 2 차원 햅틱 인터페이스 장치를 통하여 느낄 수 있도록 하였다. 구현된 시스템의 시연을 통하여 공과 핸들의 충돌 시 공이 튕겨 나가는 방향과 속도가 실제와 유사하고 공과 핸들에서 충돌이 일어날 때 실제와 상당히 유사한 느낌은 얻을 수 있음을 확인하였다.

• Journal of Mechanical Science and Technology
• /
• v.19 no.10
• /
• pp.1864-1874
• /
• 2005

This paper describes a wearable multi-modal user interface design and its implementation for a teleoperated field robot system. Recently some teleoperated field robots are employed for hazard environment applications (e.g. rescue, explosive ordnance disposal, security). To complete these missions in outdoor environment, the robot system must have appropriate functions, accuracy and reliability. However, the more functions it has, the more difficulties occur in operation of the functions. To cope up with this problem, an effective user interface should be developed. Furthermore, the user interface is needed to be wearable for portability and prompt action. This research starts at the question: how to teleoperate the complicated slave robot easily. The main challenge is to make a simple and intuitive user interface with a wearable shape and size. This research provides multi-modalities such as visual, auditory and haptic sense. It enables an operator to control every functions of a field robot more intuitively. As a result, an EOD (explosive ordnance disposal) demonstration is conducted to verify the validity of the proposed wearable multi-modal user interface.

• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.1
• /
• pp.2-8
• /
• 2002

This paper discusses haptic display for grasping a virtual object by two fingers. Much research has been done on fundamental analysis for stability of haptic display. But it is difficult to apply the results immediately to grasping situations by two fingers, since the studies usually deal with a single device and a single object and the fingertip force in grasping situations has two components, internal and external components. The conventional methods, which specify the coupling impedance at each contact point separately, have no other alternative but to specify the impedance for the sum of the internal and external components. So even if only the impedance for the external force should be changed, the impedance for the internal force is also changed at the same time. In this paper, a new method, in which the coupling impedance is specified separately for the internal and external forces, is proposed and the stability of the proposed method is discussed using passivity analysis for 1 -DOF(Degree-Of-Freedom) system. Finally, some experiments are performed to study the effects of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2765-2770
• /
• 2003

This paper introduces a novel control algorithm, energy bounding algorithm, for stable haptic interaction. The energy bounding algorithm restricts energy generated by zero-order hold within consumable energy by physical damping that is energy consumption element in the haptic interface. The passivity condition can always be guaranteed by the energy bounding algorithm. The virtual coupling algorithm restricts the actuator force with respect to the penetration depth and restricts generated energy. In contrast, energy bounding algorithm restricts the change of actuator force with respect to time and restricts generated energy by zero-order hold. Therefore, much stiffer contact simulation can be implemented by the energy bounding algorithm. Moreover, the energy bounding algorithm doesn’t is not computationally intensive and the implementation of it is very simple.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.3
• /
• pp.277-283
• /
• 2006

A recently proposed method for stabilizing haptic interfaces and teleoperation systems was tested with a 'PHANToM' commercial haptic device. The 'Passivity Observer' (PO) and 'Passivity Control1er' (PC) stabilization method was applied to stabilize the system but also excited a high frequency mode in the device. To solve this problem, we propose a method to use a timevarying desired energy threshold instead of fixed zero energy threshold for the PO, and make the actual energy input follow the timevarying energy threshold. With the time-varying energy threshold, we make the PC control action smooth without sudden impulsive behavior by distributing the dissipation. The proposed new PO/PC approach is applied to PHANToM with high stiffness (K = 5000N/m), and stable and smooth contact is guaranteed. Resetting and active environment display problems also can be solved with the reference energy following idea.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1662-1667
• /
• 2005

In this paper, analysis, design, control and prototype construction of a wearable wire-driven haptic interface called HapticPen is discussed. This device can be considered as a wire driven parallel mechanism which three wires are attached to a pen-tip. Wire tensions are provided utilizing three DC servo motors which are attached to a solid frame on the user's body. This device is designed as input as well as output device for a wearable PC. User can write letters or figures on a virtual plate in space. Pen-tip trajectory in space is calculated using motor encoders and force feedback resulting from contact between pen and virtual plate is provided for constraining the pen-tip motion onto the virtual plane that can be easily setup by arbitrary non-collinear three points in space. In this paper kinematic model, workspace analysis, application analysis, control and prototype construction of this device are presented. Preliminary experiments on handwriting in space show feasibility of the proposed device in wearable environments.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.415-421
• /
• 1999

In this paper, a 2D X-Y table, two axes of which are symmetrical, and a force sensing device are constructed, which comprise a 2D haptic interfacing apparatus. Two DC motors are used for actuating the two axes of the table and two precision encoders for sensing the position of each axis. Four PZTs are used for sensing the direction and the magnitude of the 2D force applied to the force sensing device by the user. The performance of the 2D haptic interface device is tested by 2D virtual object recognition experiments.