• Korean Journal of Construction Engineering and Management
• /
• v.9 no.1
• /
• pp.187-198
• /
• 2008

There are usually plenty of material inventories in a construction site. More inventories can meet unexpected demands, and also they may have an economical advantage by avoiding a probable escalation of raw material costs. On the other hand, these inventories also cause negative aspects to increase costs for storing redundant inventory as well as decreasing construction productivity. Therefore, a proper method of deciding an optimal level of material inventories while considering dynamic variations of resources under uncertainty is very crucial for the economical efficiency of construction projects. This research presents a stochastic modelling method for construction operations, particularly targeting a work process involving on-site fabrication of raw materials like iron-rebar process (delivery, cut and assembly, and placement). To develop the model, we apply the concept of factory physics to depict the overall components of a system. Then, an optimal inventory management model is devised to support purchase decisions where users can make timely actions on how much to order and when to buy raw materials. Also, optimal time lag, which minimizes the storage time for pre-assembled materials, is obtained. To verify this method, a real case is applied to elicit an optimal amount of inventory and time lag. It is found that average values as well as variability of inventory level decreased significantly so as to minimize economic costs related to inventory management under uncertain project condition.

• The Korean Journal of Physiology
• /
• v.1 no.1
• /
• pp.23-32
• /
• 1967

Disappearance rate of injected $D_2O$ from the arterial blood as well as the effect of histamine on the rate were studied in rabbits. The concentrations of $D_2O$ in the serial arterial samples obtained through a Polyethylene tubing inserted into the carotid artery were assayed by the freezing point elevation method of Reaser. At zero time 3 ml of isotonic $D_2O$ in normal saline was injected into the jugular vein and at the same time serial sampling of arterial blood started. The serial sampling interval was either 7.7 sec or 12.3 sec. In the histamine treated animals histamine diphosphate (0,5 mg of histamine base) was injected intravenously 30 minutes prior to the zero time. The following results were obtained. 1. $D_2O$ concentration in arterial plasma water, x, was empirically obtained by the sum of 2 exponential terms of time, $x=Ae^{-k1t}+Be^{-k2t},$ and its theoretical basis was sought. The first term of the right member of the equation was regarded to be attributable to the compartment P which possessed instantaneous exchange of water with plasma. The second term was postulated to represent the poorly exchangeable compartment. 2. The constant A of the equation was evaluated as 4,37% and 14.3% in the control and histamine treated groups, respectively. B was 1.19% in the control and 0.849% in histamine treated animals. 3. The disappearance rates determined were; $k_1=0.0519{\pm}0.0221\;sec^{-1}\;K_2=0.00454{\pm}0.00247\;sec^{-1}$ in the control group. $k_1=0.1137{\pm}0.0290\;sec^{-1}\;K_2=0.00499{\pm}0.00204\;sec^{-1}$ in the histamine group. 4. In the histamine treated animals the disappearance rate of the first term was larger than that of the control animals, suggesting an enlarged size of the rapidly exchangeable compartment with regard to the plasma water. On the other hand the constant B was decreased by histamine administration, suggesting a distribution of $D_2O$ in an enlarged volume. This view was also made clear by comparing the apparent asymptotes to which the concentration curves of $D_2O$ approached in respective groups. The asymptotes in the histamine treated group showed lower values.

• Journal of Periodontal and Implant Science
• /
• v.42 no.3
• /
• pp.88-94
• /
• 2012

Purpose: The use of appropriate instruments to clean surfaces with minimal change, is critical for the successful maintenance of a dental implant. However, there is no consensus about the type and methodology for such instruments. The aim of this study was to characterize changes in the roughness of titanium surfaces treated by various scaling instruments. Methods: Thirty-seven identical disks (5 mm in diameter) were investigated in this study. The specimens were divided into eight groups according to the types of instrumentation and the angle of application. Ultrasonic scaling systems were applied on a titanium disk to simulate standard clinical conditions. The equipment included a piezoelectric ultrasonic scaler with a newly developed metallic tip (NS group), a piezoelectric ultrasonic scaler with a conventional tip (CS group), a piezoelectric root planer ultrasonic scaler with a conventional tip (PR group), and a plastic hand curette (PH group). In addition, the sites treated using piezoelectric ultrasonic scaler systems were divided two sub-groups: 15 and 45 degrees. The treated titanium surfaces were observed by scanning electron microscopy (SEM), and the average surface roughness (Ra) and mean roughness profile depth (Rz) were measured with a profilometer. Results: SEM no significant changes in the titanium surfaces in the NS group, regardless of the angle of application. The PH group also showed no marked changes to the titanium surface, although some smoothening was observed. All CS and PR sites lost their original texture and showed irregular surfaces in SEM analysis. The profilometer analysis demonstrated that the roughness values (Ra and Rz) of the titanium surfaces increased in all, except the PH and NS groups, which showed roughness decreases relative to the untreated control group. The Ra value differed significantly between the NS and PR groups (P<0.05). Conclusions: The results of this study indicated that changes in or damage to titanium surfaces might be more affected by the hardness of the scaler tip than by the application method. Within the limitations of this study, the newly developed metallic scaler tip might be especially suitable for peri-implant surface decontamination, due to its limited effects on the titanium surface.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.10
• /
• pp.709-714
• /
• 2012

This study accessed the adsorption characteristics of the nine nitrosamine species on coal-based granular activated carbon (GAC). The breakthrough appeared first for NDMA and sequentially for NMOR, NPYR, NMEA, NDPA, NDEA, and NPIP. On the other hand, NDBA and NDPHA were not detected in the treated effluent for the operation period. The maximum adsorption capacity (X/M) for the seven nitrosamine species with apparent breakthrough points ranged from $27.5{\mu}g/g$ (for NDMA) to $671.0{\mu}g/g$ (for NPIP). Carbon usage rate (CUR) for NDMA was 1.07 g/day, 13.4 times higher than that for NPIP (0.08 g/day). The X/M values for the seven nitrosamine species were fitted well with a linear regression ($r^2$ = 0.94) by their octanol-water partitioning coefficient ($K_{ow}$).

• Journal of Korean Society of Transportation
• /
• v.34 no.1
• /
• pp.43-54
• /
• 2016

Although there are continuous demands for activating BSSs(Bicycle Sharing Systems) due to the convenience and positive health effects, it is difficult to make a decision to support the existing systems and build more systems because of the deficit resulting from the operation of BSSs. Consequently, this study estimated the economic effects(WTP; Willingness to Pay) of BSS and analyzed the impact factors of WTP to support the above decision making in Daejeon. For this, we conducted a survey and collected 668 samples from the users and non-users of TASHU that is the BSS operated in Daejeon. Also, we used CVM(Contingent Valuation Method) for the estimation of WTP. The results show that the number of bicycle uses is a determinant factor having a positive relationship with WTP and car ownership and age are also determinant factors having a negative relationship with WTP. On the other hand, income and sex have no significant statistical relationship with WTP. Also, the economic benefit of TASHU was estimated as much as 49.9 billion KRW to 63.6 billion KRW. Considering the operation cost of 2.5 billion KRW, it is quite big benefit. Based on the results, it needs to support TASHU from a user perspective for the efficient operation of the system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.153-164
• /
• 2015

The methods of design of mat foundation may be classified as the rigid method and the flexible method according to the assumptions used. In the rigid method, the mat is assumed to be infinitely rigid and the contact pressure is assumed planar distribution. However, the contact pressure is not planar but curved surface because the real mat is not rigid. Therefore, it is not precise to analyze the mat foundation using the rigid method, and so there is no choice but to accept an error. On the other hand, in the flexible method, the mat is considered as the plate on the elastic foundation. This elastic plate theory is for the infinite plate acting a concentrated load on the elastic foundation. However, the functions for the moment, shear, and the deflection by the flexible method are very complex, there are many difficulties for the designer to use them. Also, it is impossible to use the design aid figures as a substitute of the complex functions, because they do not cover the values at the critical sections for the moment and shear. Therefore, in this research, the simplified functions for the moment, shear, and the deflection are proposed by regression analysis for an designer to use easily the flexible method. The simplified functions are very accurate and very ease to use.

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.191-196
• /
• 2013

The purpose of this study was to evaluate the tooth brightening of whitening dentifrice and to determine the tooth stain level over 20 days depending on beverages that have various pH values after using whitening dentifrice. Thirty teeth were randomly divided into two groups. Group 1 was provided with a whitening dentifrice for 3 minutes and group 2 was treated with a control dentifrice for 3 minutes thrice a day for four weeks. All teeth were photographed using a digital imaging system under a stereomicroscope (magnification, ${\times}10$). After four weeks, the ten teeth were immersed in the tea solution, another of ten teeth were immersed in the orange juice and the other of the teeth were immersed in the coffee solution. Three solutions were renewed each day for the appropriate groups. Stain development was monitored under a stereomicroscope daily over 20 days period by immersion of teeth in a tea, juice, coffee solution at room temperature ($25^{\circ}C$) in individual container. Whitening dentifrice gave a statistically higher value of overall color change as compared to control dentifrice after 21 days (p<0.05). Stain level of whiten tooth immersed in orange juice was the grestest overall color change, but there was not statistically significant difference (p>0.05). On the other hand, stain level of whiten tooth immersed in coffee and green tea showed a statistically significant difference after 15 days and 5 days, respectively (p<0.05). Tooth immersed in green tea was higher negative value than control dentifrice. The tooth using whitening dentifrice was shown to be effectively whiter color than control dentifrice. However, stain level by orange juice, coffee and green tea has a strong staining effect.

• Journal of Nutrition and Health
• /
• v.44 no.6
• /
• pp.527-536
• /
• 2011

This study was performed to analyze children's perceptions and practice levels according to gender and obesity status using a dietary life safety index. A national survey was conducted on fifth grade children (n = 2,400), who were selected using three-stage stratified cluster sampling from 16 provinces. The average height was 144.8 cm, and weight was 38.8 kg. The average body mass index was 18.4 kg/$m^2$ and underweight, overweight, and obese children were identified using the 2009 KHNANES cutoff values, which were 5.3%, 10%, and 5.9%, respectively. The perception and practice scores for hand-washing prior to eating were high and the score for willing to buy at a clean store was also high. However, students answered that the hygiene level of food stores near the school was poor. More students skipped breakfast than lunch or dinner. The frequency scores for fruit and vegetables were significantly higher for girls than those for boys. Students had a good understanding of nutrition labeling but did not frequently check the label. Seventy-five percent of the students tried to avoid high calorie foods with low nutritional value, but only 40% had the appropriate knowledge about high calorie foods with low nutritional value. Girls had better dietary life perception and practice levels than those of boys. No differences in perception or practice levels were observed based on obesity status. Nutrition education on the importance of eating breakfast and having accurate knowledge on nutrition labeling and high calorie foods with low nutritional value is needed. Behavior-centered education should be implemented to improve the perceptions and practice level of student's dietary life.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.251-257
• /
• 2012

Human body communication means transmitting and receiving data through human body medium or through free space along with the human body skin. Electric field distribution around the human body between the transmitter and the receiver were calculated at five different frequencies with 5 MHz interval between 10 MHz and 30 MHz. Commercial electromagnetic simulation tool was used for the calculation of E-field distributions applying the Korean standard male model including 29 different kinds of human tissues. After calculating specific absorption rate(SAR) values on back of the hand, it was compared with International Commission on Non-Ionizing Radiation Protection(ICNIRP) human protection guideline. While conductivities(${\sigma}$) and relative permittivities(${\varepsilon}_r$) of the human tissues for each frequency were input as the analyzing parameters, electric field intensities near both hands were integrated along the integral line between the nearby electrodes for the calculation of the transmitting and receiving voltages whose ratio was defined as channel loss. The calculated channel losses were about ($75{\pm}1$) dB and showed nearly flat response all through the evaluated frequencies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.919-925
• /
• 2012

We tried to blend PLLA and PDLA at overall compositions to form PLA stereocomplexes (SC). The presence of the SC crystalline phase in the PLLA matrix was verified by differential scanning calorimetry (DSC). As a result, a various PDLA composition of the PLA SC blends can influence PLA SC formation. And the largest amount of PLA SC crystallites was formed when PLLA/PDLA ratio is 50/50. In addition, we have tried to do PLA SC toughening with two impact modifiers in 92/8, 85/15 ratio of PLLA/PDLA to enhance the mechanical properties such as impact strength. Thermal and mechanical properties of PLA SC were investigated by DSC, HDT, Izod impact tester and UTM. PLA SC formation decreased when 10-20 wt% of Strong120 (impact modifier) was added. On the other hand, there is no effect on PLA SC formation when 10-20% of Elvaloy (impact modifier) was added. HDT values dramatically increased over $100^{\circ}C$ with the addition of PDLA. However, HDT decreased as Strong120 and Elvaloy content increased. Finally, we could find well balanced composition of toughened PLA SC with 10wt% of impact modifier in flexural modulus and impact strength.