• Title/Summary/Keyword: Hand Shape

Search Result 973, Processing Time 0.025 seconds

A Study on Automatic Threshold Selection in Line Simplification for Pedestrian Road Network Using Road Attribute Data (보행자용 도로망 선형단순화를 위한 도로속성정보 기반 임계값 자동 선정 연구)

  • Park, Bumsub;Yang, Sungchul;Yu, Kiyun
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.31 no.4
    • /
    • pp.269-275
    • /
    • 2013
  • Recently, importance of pedestrian road network is getting emphasized as it is possible to provide mobile device users with both route guidance services and surrounding spatial information. However, it costs a tremendous amount of budget for generating and renovating pedestrian road network nationally, which hinder further advances of these services. Hence, algorithms extracting pedestrian road network automatically based on raster data are needed. On the other hand, road dataset generated from raster data usually has unnecessary vertices which lead to maintenance disutility such as excessive turns and increase in data memory. Therefore, this study proposed a method of selecting a proper threshold automatically for separate road entity using not only Douglas-Peucker algorithm but also road attribute data of digital map in order to remove redundant vertices, which maximizes line simplification efficiency and minimizes distortion of shape of roads simultaneously. As a result of the test, proposed method was suitable for automatic line simplification in terms of reduction ratio of vertices and accuracy of position.

A Study on the Integration of Airborne LiDAR and UAV Data for High-resolution Topographic Information Construction of Tidal Flat (갯벌지역 고해상도 지형정보 구축을 위한 항공 라이다와 UAV 데이터 통합 활용에 관한 연구)

  • Kim, Hye Jin;Lee, Jae Bin;Kim, Yong Il
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.38 no.4
    • /
    • pp.345-352
    • /
    • 2020
  • To preserve and restore tidal flats and prevent safety accidents, it is necessary to construct tidal flat topographic information including the exact location and shape of tidal creeks. In the tidal flats where the field surveying is difficult to apply, airborne LiDAR surveying can provide accurate terrain data for a wide area. On the other hand, we can economically obtain relatively high-resolution data from UAV (Unmanned Aerial Vehicle) surveying. In this study, we proposed the methodology to generate high-resolution topographic information of tidal flats effectively by integrating airborne LiDAR and UAV point clouds. For the purpose, automatic ICP (Iterative Closest Points) registration between two different datasets was conducted and tidal creeks were extracted by applying CSF (Cloth Simulation Filtering) algorithm. Then, we integrated high-density UAV data for tidal creeks and airborne LiDAR data for flat grounds. DEM (Digital Elevation Model) and tidal flat area and depth were generated from the integrated data to construct high-resolution topographic information for large-scale tidal flat map creation. As a result, UAV data was registered without GCP (Ground Control Point), and integrated data including detailed topographic information of tidal creeks with a relatively small data size was generated.

First Report of a Hybridization between Caretta caretta and Chelonia mydas from Jeju Island, South Korea (한국의 제주에서 발견된 바다거북 잡종(Caretta caretta ${\times}$ Chelonia mydas)에 대한 첫 보고)

  • Koo, Kyo-Soung;Han, Sang-Hyun;Oh, Hong-Shik
    • Korean Journal of Environmental Biology
    • /
    • v.32 no.4
    • /
    • pp.377-381
    • /
    • 2014
  • In this study, we report for the first time a hybridization between Caretta caretta and Chelonia mydas in South Korea. On 7th May 2012, a sea turtle (Jeju sea turtle 01, JST01) was found in the east coast of Jeju Island, South Korea. The morphological characteristics of JST01 were compared with those of C. caretta and C. mydas that were frequently observed in Korean Seas. Interestingly, JST01 showed similar morphological characters such as body color, appearance of carapace, shape of upper beak, serration on marginal scute, and two claws with those of C. caretta. On the other hand, JST01 showed also similar patterns in several characteristics including the numbers of marginal, inframarginal and costal scute, smooth carapace without keel, no contact between costal scute and nuchal scute with those of C. mydas. From these results, we suggest that JST01 is one of hybrid animals bred between C. caretta and C. mydas, because JST01 has species-specific characters from both species. We anticipate that our study would be useful and have significant impact onto study inter-specific hybridization in the groups of sea turtle.

Effect of Cd Concentration on Characteristics of CdS Thin Films Prepared by Chemical Bath Deposition (화학용액증착법에 의하여 증착된 CdS 박막의 특성에 대한 Cd 농도의 영향)

  • Jung, SungHee;Chung, CheeWon
    • Applied Chemistry for Engineering
    • /
    • v.23 no.4
    • /
    • pp.377-382
    • /
    • 2012
  • CdS thin films have been widely used as a buffer layer of CIGS semiconductor solar cells to reduce the lattice mismatch between transparent electrode and absorber layer. In order to prepare the CdS films with high transparency and low resistivity, they were deposited by varying Cd concentration with the constant S concentration in the solution using chemical bath deposition method. They were analyzed in terms of structural, optical and electrical properties of CdS films according to the $[S^{2-}]/[Cd^{2+}]$ ratio. In the case of Cd concentration higher than S concectration, CdS thin films were formed mainly by cluster- by-cluster formation due to the homogeneous reaction between Cd and S in the solution. Therefore the grain size increased and the transmittance decreased. On the other hand, in the case of Cd concentration lower than S concentration, CdS films were formed by heterogeneous reaction on the substrate rather than in the solution. The CdS films have the grains with the uniform circular shape of a few hundreds ${\AA}$. As the Cd concentration increased in the solution, the $[S^{2-}]/[Cd^{2+}]$ ratio decreased and the resistivity decreased by the increase in the carrier concentration due to the formation S vacancy by the excess Cd.

Punching Shear Strength of Deck Slabs Made of Ultra High Performance Concrete (UHPC 바닥판 슬래브의 뚫림전단강도)

  • Joh, Chang Bin;Kim, Byung Suk;Hwang, Hoon Hee;Choi, Kyoung Kyu;Choi, Sok Hwan
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.15 no.4
    • /
    • pp.221-231
    • /
    • 2011
  • Thinner and lighter structural members can be designed by utilizing the high stiffness and toughness, and high compressive strength of UHPC(ultra high performance concrete), which reaches up to 200MPa. The punching shear capacity of UHPC was investigated in this paper aiming for the application of UHPC to bridge decks. Six square slabs were fabricated and punching shear test was performed under fixed boundary condition. Different thicknesses of test slabs, which were 40mm and 70mm, were selected. The shape ratio of loading plates were ranged between 1.0~2.5. 40mm thickness slabs showed longer softening region after the peak load and, on the other hand, 70mm thickness slabs revealed a more brittle shear failure. Experimental results were analyzed using various existing punching shear predicting equations. Ductal$^{(R)}$ equation and JSCE equation better predicted for 40mm slabs, and Harajli et al. equation and ACI-Ductal$^{(R)}$ equation better suited for 70mm slabs. Nevertheless generally they didn't well predict the test results. A new punching shear equation which was derived based on the actual failure mechanism was proposed. The proposed equation appeared to better predict the punching shear strength of UHPC than other available equations.

Examination on unified Silla's cultural exchange and brick pagoda formation course (통일신라의 문화교류 및 전탑형성과정에 대한 고찰)

  • Kim, Sang-Gu;Lee, Jeong-Soo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.15 no.8
    • /
    • pp.5369-5377
    • /
    • 2014
  • Korean pagodas were constructed in the shape of a wood pagoda, brick pagoda, stone pagoda, etc. On the other hand, the currently remaining traditional pagodas are those having nonflammable materials, such as brick, stone, etc. Compared to the stone pagoda, there is data regarding brick pagodas, but there is little literature data on how to construct these pagodas. This appears to be because there are relatively few Korean brick pagodas currently remaining, they are locally restricted, the material limit is not overcome, pagoda's historical and regional problems have not been analyzed, and pagoda construction is centered on pagoda construction. Therefore, this study examined the local cultural characteristics on the construction of brick pagodas. As a result, cultural exchange between Korea and China was performed through the silk road and there was a marine route for cultural exchange. Such exchange was shared with the East Asia area as well, which can be found by comparing remains at related areas. Exchange with China can be mentioned as the selective exchange of local powers as well as blind learning. Second, brick pagoda were constructed in Korea because of the good quality soil easily. Uisang's Hwaeomjong was negotiated with the main power not agreeing with Buddhism, which was popularized and the local power. Third, brick pagoda construction was influenced by negotiation related between Balhae and Silla, in which the ethnic influence was locally affected and could be mentioned as being a culturally selective result transferred from China. As a result, brick pagodas can be oriented by forming a unitary state rather than a small country within China's influence range as well as cultural transfer through the silk road.

The Effects of Fluoride Administered Systemically during Rat Development on Forming Bone (발생중인 흰쥐에 전신적으로 투여된 불소가 골형성에 미치는 영향)

  • Lim, Do-Seon;Ahn, Yong-Soon;Kim, Eun-Sook;Bae, Hyung-Joon;Chang, Byung-Soo
    • Applied Microscopy
    • /
    • v.32 no.3
    • /
    • pp.265-273
    • /
    • 2002
  • The purpose of this study was to observe the influences of the water fluoride concentration on the growth changes, the histologic characteristics of osteoblast in the tibia of growing newborn rats by using electron microscopy and on the composition changes of bone matrix in those by using energy dispersive x-ray system (EDX). The water fluoride concentration was respectively 0 ppm (contrast group), 100 ppm (100 ppm group), 200 ppm (200 ppm group) and 300 ppm (300 ppm group). The results of the investigation by using electron microscopy were as followed. In contrast group, the traditional cuboidal osteoblasts were observed. In 100 ppm group, several reversal line, the newly formed osteoid by the strongly activated osteoblast and the well developed rough endoplasmic reticulum, mitochondria in cytoplasm of osteoblast were observed. Also, many secretory vesicle around cell membrane were observed and some fused with cell membrane released secretory granule out of cell. In 200 ppm group, the depressed osteoblasts were observed, mitochondria in cytoplasm were expanded and cristae shape in mitochondria were destroyed. Also, the ribosome at the surface of rough endoplasmic reticulum were not observed. In 300 ppm group, the adjacent osteoblasts with endosteum were irregularly arranged, the cell membrane were destroyed and organelles were flowed out of cell. On the other hand, the results of the investigation by using energy dispersive x-ray system were as followed. P and Ca concentrations in 100 ppm group were increased more than those in contrast group. But, in 200 and 300 ppm group were not increased more than those in 100 ppm group. Therefore, the activities of the osteoblasts were increased, the bone matrix were actively synthesized by the supplied water fluoride. But, the osteoblasts were destroyed, inhibited by the higher water fluoride concentration.

A Study of the Personal Ornaments and Make-up of Maroccan (모로코인(人)의 장신구(裝身具)와 화장(化粧)에 관(關)한 연구(硏究))

  • Lee, Soon-Hong
    • Journal of Fashion Business
    • /
    • v.5 no.2
    • /
    • pp.15-34
    • /
    • 2001
  • Ornaments are accessories for the decoration of the body or dress. They aren't unavoidably required one, but serve to make one's dress perfect as decorative industrial art objects. In Morocco, ornaments were initially used as a sign of social position or the class or an incantatory symbol. In effect, they were originally employed to adjust one's dress, not just for decoration, and they were of use for household economy. Gold, silver and handcraft available for exchange were a means of increasing one's property and an indication of social standing and wealth. In particular, the dress and jewelry of a bride was a measure of her family's wealth, regarded as a symbol of her chastity and value. The ornaments symbolically back up people's faith in supernatural power, and their real value is based on implicit form or way of decoration, not the external shape. Specifically, there is a tendency to use the form of animal as a protector, not one to frighten people. In the artistic tradition of Morocco, fish pattern stands for water and rain, and eagle and bird are considered to be related to fate. Scorpion and lizard are depicted as an inquirer of sun, and snake is a symbol of abundance and sexual instinct, being viewed to have an ability to cure disease. Turtle pattern is a symbol of saint because it protects one from the evil. The ornaments are made of gold, silver, amber, clam, garnet, glass, nielle, enamel, glaze, coral or tree, and symbolic patterns are used, including hand(a symbol of five numerals), turtle, lizard, scorpion, eye, triangle, bird and eggs. They are very big and diverse, being categorized into ornaments for the head or the chest, neckless, fibula, earring, bracelet and ring. For Moroccans, make-up is a sort of instinctive behavior to meet aesthetic and sexual desire. They also wear make-up for practical purpose of protection, intentionally inflict a wound on the skin for ceremonial or religious purpose, paint the skin with pigment, or have the part of the body tattooed for incantatory purpose. All this actions are regarded as make-up. The raw material of cosmetics is aker, a vegetable dye. They get the lips or cheeks turn red and paint eyebrows with yellow saffran powder to have a bad devil lose its strength. Tattooing is mainly done by women and viewed as a sign of their value or social organization they belong to. Sometimes that is used to represent a woman's being old enough to marry or getting married already or the frequency of marriage. Besides, tattoo is believed to prevent or remedy loose bowels or cough, depending on its location or pattern, and they often change tattoo according to the change of beauty art.

  • PDF

A Study on the Patternwork Departments of Apparel Manufacturing Companies in Korea (국내(國內) 의류업계(衣類業界)의 패턴실(室) 운용(運用) 실태(實態) 연구(硏究))

  • Koh, Ji-Young;Sohn, Hee-Soon
    • Journal of Fashion Business
    • /
    • v.3 no.4
    • /
    • pp.139-146
    • /
    • 1999
  • The purpose of this study is to analyze the efficiency and working conditions of the patternwork departments by surveying the apparel manufacturing companies sampled in Seoul for their organization, working enviornment and technology of their patternwork departments, and thereby, find the ways to promote the functions of the patternwork department. The results of this study can be summarized as follows; 1. As a result of analyzing the working environment of patternwork departments, it was found that the problems counted by most of the pattern workers were lack of workforce, unhygienic or unpleasant workplaces. 2. As a consequence of analyzing the sample production in terms of tacking methods and times, They rarely tacked the white cotton. Such an omission of tacking procedure may serve to save time, but if a sewing error occurs, the working time would rather be longer due to the defects of pattern to be remedied. 3. As a result of reviewing the general patternwork conditions, it was found that the patterns were still worked out in two dimensions. On the other hand, more than 60% of the pattern workers were applying to their patternworks the styles which they had learned from their seniors. Few patterns are being developed in conformity to apparel trends or body shape changes. 4. As a consequence of examining the problems involving the production of patternsl, the problems involved primarily the patterns incised off no-dart pattern and body structure, and in light of items, involved mainly the trousers and in light of material, involved much the stretch or velvet. Moreover, it is deemed necessary to establish a special institute devoted to a systematic development of pattern technology. 5. Most of the CAD patternworks are used not for pattern designing but for grading and marking works, which suggests that pattern workers need to be educated on this new technology for more diverse and precise patternworks. 6. Lastly, as a result of examining the conditions of patternwork departments and their relevant works, most of the pattern workers were found to be subject to irregular and excessive workload, having little time to produce good patterns. This finding suggests that it is necessary to mandate the pattern workers to more involve the commodity planning.

  • PDF

Interface of Interactive Contents using Vision-based Body Gesture Recognition (비전 기반 신체 제스처 인식을 이용한 상호작용 콘텐츠 인터페이스)

  • Park, Jae Wan;Song, Dae Hyun;Lee, Chil Woo
    • Smart Media Journal
    • /
    • v.1 no.2
    • /
    • pp.40-46
    • /
    • 2012
  • In this paper, we describe interactive contents which is used the result of the inputted interface recognizing vision-based body gesture. Because the content uses the imp which is the common culture as the subject in Asia, we can enjoy it with culture familiarity. And also since the player can use their own gesture to fight with the imp in the game, they are naturally absorbed in the game. And the users can choose the multiple endings of the contents in the end of the scenario. In the part of the gesture recognition, KINECT is used to obtain the three-dimensional coordinates of each joint of the limb to capture the static pose of the actions. The vision-based 3D human pose recognition technology is used to method for convey human gesture in HCI(Human-Computer Interaction). 2D pose model based recognition method recognizes simple 2D human pose in particular environment On the other hand, 3D pose model which describes 3D human body skeletal structure can recognize more complex 3D pose than 2D pose model in because it can use joint angle and shape information of body part Because gestures can be presented through sequential static poses, we recognize the gestures which are configured poses by using HMM In this paper, we describe the interactive content which is used as input interface by using gesture recognition result. So, we can control the contents using only user's gestures naturally. And we intended to improve the immersion and the interest by using the imp who is used real-time interaction with user.

  • PDF