• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.73-77
• /
• 1990

In this paper we describe the solid-state ac-circuit breaker which has the characteristic of both a half cycle circuit breaker and a current limiting circuit breaker. This circuit breaker has a current limiting resistor in order to surprises the fault current to a certain level and discharge the energe included in circuit inductor. We explain the effect of circuit parameter on transient phenomena of switch device by using EMTP and finally design the control circuit consisted synchronous closing circuit, over- current detecting circuit and sensing circuit of rate of rise of fault current.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.123-127
• /
• 2001

In this paper, prototype high-power-factor single-stage electronic ballast for fluorescent lamps is designed and implemented. A new low cost single stage high power factor electronic ballast for fluorescent lamps is based on integration of two-boost converter and LC type high frequency resonant converter. A ballast is obtained by simple construction, because full bridge rectifier diode is eliminated and simple control circuit is applied. Using two boost converter operating positive and negative half cycle respectively at line frequency (60Hz), operation in discontinuous conduction mode performs high power factor. The experimental results Show the good performance as PF 0.99, $A_{THD}$ 15.4%, and CF 1.65 at Output 63.5W.W.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1129-1131
• /
• 2001

A new low cost single stage high power factor electronic ballast for fluorescent lamps is presented in this paper. The proposed topology is based on integration of two-boost converter and LC type high frequency resonant converter. A ballast is obtained by simple construction, because full bridge rectifier diode is eliminated and simple control circuits is applied. Using two boost converter operating positive and negative half cycle respectively at line frequency (60Hz), operating in discontinuous conduction mode performs high power factor. The simulated and experimental results for 64W fluorescent lamps operating at 45kHz switching frequency and 110V line voltage have been obtained.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1202-1204
• /
• 2004

This paper propose the control algorithm for improving the power quality through the voltage compensation when source voltage is dropped. The algorithm signified occurrence of voltage drop in source voltage of each phase storing source voltage for two cycles using the concept of moving average and using the source voltage of last half cycle. If there are voltage drops in the source voltages, series active power filter compensates the differences between reference waveform and source voltage waveform. Therefore, voltage drop is compensated. It proposed series active power filter of three phases three lines to apply to the proposed algorithm and the presented experiment results verified logicality and effectiveness of the proposed algorithm.

• 전력전자학회논문지
• /
• 제23권6호
• /
• pp.381-388
• /
• 2018

A novel and simple algorithm for accurate calculation of RMS voltage is proposed in a digitally controlled grid-tie inverter system. Given that the actual frequency of grid voltage is continuously changing, the constant sampling frequency cannot be a multiple number of the fundamental frequency. Therefore, the RMS of grid voltage contains periodic oscillations due to the differences in the phase angle of sampled data during calculation. The proposed algorithm precisely calculates and updates the initial phase angle of the first sampled voltage in a half-cycle period using phase-locked loop, which is commonly utilized for phase angle detection in grid-tie inverter systems. The accuracy and dynamic performance of the proposed algorithm are compared with those of other algorithms through various simulations and experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.153-155
• /
• 2019

This paper proposes a two-phase interleaved bridgeless single-stage ac-dc converter with magnetic integration that can achieve CCM power factor correction without input current sensing. All switches achieve ZVS turn-on and all diodes achieve ZCS turn-on for the whole grid cycle. SDAB-based modulation strategy is applied which results in simple power control and wide range output voltage. A flux cancellation method to integrate the interleaved transformer is firstly proposed in this paper to reduce the core size and loss. Experimental results on a 1.7-kW, 50kHz prototype are given to verify the principle and advantages of the proposed ac-dc converter.

• 전자공학회논문지SC
• /
• 제46권1호
• /
• pp.76-81
• /
• 2009

본 논문에서는 새로운 방법의 채널 시간 공유 Subranging ADC를 제안한다. 기존 Subranging ADC의 경우, 상위 비교기 블록과 하위 비교기 블록이 각각 존재 하여 면적과 파워소비가 단점을 지니고 있다. 제안하는 Subrangin ADC는 기존 Subranging ADC와 비슷하나 가장 큰 특징은 하위 ADC의 비교기가 존재하지 않는다. 하위 ADC의 비교기가 존재하지 않는 대신에 Control Switch(CS)를 사용하여 상위 ADC의 비교기를 시간차이를 두고 공유하는 형식을 보여주고 있다. 제안하는 ADC는 하위단의 비교기 블록을 제거하고 상위단의 비교기 블록과 공유하므로 기존 Subranging ADC보다 컴페레이터 숫자를 반으로 줄이며 따라서 칩 전체 면적을 40% 가량 줄인다. 동작 특성을 확인하기 위하여 $0.18{\mu}m$ 1P6M Technology 이용하여 제안된 방법으로 8bit ADC를 설계하였다. 시뮬레이션 결과, 전원전압 1.8V에서 8bit 80MS/s 특성 그리고 10mW의 낮은 전력 소모의 특성을 나타내었다.

• The Journal of Advanced Prosthodontics
• /
• 제12권3호
• /
• pp.140-149
• /
• 2020

PURPOSE. This study evaluated the color stabilities of two computer-aided design and computer-aided manufacturing (CAD/CAM) blocks and a nanofill composite resin and the microtensile bond strength (µTBS) between the materials. MATERIALS AND METHODS. Twelve specimens of 4 mm height were prepared for both Lava Ultimate (L) and Vita Enamic (E) CAD/CAM blocks. Half of the specimens were thermocycled (10,000 cycle, 5° to 55℃) for each material. Both thermocycled and non-thermocycled specimens were surface treated with one of the three different methods (Er,Cr:YSGG laser, bur, or control). For each surface treatment group, one of the thermocycled and one of non-thermocycled specimens were restored using silane (Ceramic Primer II), universal adhesive (Single Bond Universal), and nanofill composite resin of 4-mm height (Filtek Ultimate). The other specimens were restored with the same procedure without using silane. For each group, 1 × 1 × 8 mm bar specimens were prepared using a microcutting device. Bar specimens were thermocycled (10,000 cycle, 5° to 55℃) and microtensile tests were performed. Staining of the materials in coffee solution was also compared using a spectrophotometer. Data were analyzed using one-way ANOVA, t-test and post-hoc Scheffe tests. RESULTS. µTBS were found similar between the thermocycled and non-thermocycled groups (P>.05). The highest µTBS (20.818 MPa) was found in the non-thermocycled, bur-ground, silane-applied E group. Silane increased µTBS at some E groups (P<.05). Composite resin specimens showed more staining than CAD/CAM blocks (P<.05). CONCLUSION. CAD/CAM blocks can be repaired with composite resins after proper surface treatments. Using silane is recommended in repair process. Color differences may be shown between CAD/CAM blocks and the nanofill composite after a certain time period.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.143-148
• /
• 2013

When the fault occurs in power system, the fault-current exceeds breaking capacity of the circuit breaker. So, reliablity of the power system is decreased sharply. Superconducting fault-current limiter (SFCL) is operated without impedance in normal state. The fault-current is limited by its impedance during the fault condition. However, the SFCL has several weak points such as huge size, high-price, liquid-nitrogen operation for the real power system. In this paper, We suggested the high-speed interrupter to limit the fault-current in case of the single line-to-ground fault. In addition, we compared the high-speed interrupter with the SFCL to ensure the operation reliability. The proposed interrupter detected the fault-current through the CT, and the power was supplied by operation of the SCR control system. In this experiment, the power of high-speed interrupter was applied after the 4.8[msec] from fault instant. The on-off operation of the interrupter was started after half-cycle from the fault. The fault-current was flowed into the impedance element by the switching operation of the high-speed interrupter. So, the fault current was limited within one cycle, and then it didnt exceed the capacity of a circuit breaker. We confirmed that there was slight difference between the SFCL with high-speed interrupter in terms of limiting-time of the fault-current and switching speed of the SCR. The high-speed interrupter was considered to be more efficient than the SFCL in size, cost or reliability.

• 생명과학회지
• /
• 제16권4호
• /
• pp.598-604
• /
• 2006

$Ca^{2+}$-농도 의존적으로 활성화되는 neutral protease calpain에 의한 단백질 분해는 세포의 성장을 조절하는데 중요한 단백질들의 역할에 매우 중요한 역할을 한다. Cyclin의 분해는 세포주기의 진행을 위한 필연적인 과정이다. D-type cyclins는 외부자극이나 신호에 의하여 세포주기의 G1 초기에 합성이 된 후 cyclin-dependent kinases (cdk4 및 cdk6)와의 결합하여 세포주기 S기 진입을 촉진하는 역할을 한다. 본 연구에서는 MDA-MB-231 인체 유방암세포에서 cyclin D3 단백질이 calpain protease에 의하여 전사 후 수준에서 조절 받고 있음을 제시하였다. 본 실험의 조건에서 lovastatin과 actinomycin D가 처리된 MDA-MB-231 세포에서 cyclin D3 단백질의 발현이 완전히 사라졌지만, calpain inhibitor인 LLnL의 처리에 의하여 정상 수준으로 회복되었음을 알 수 있었다. 그러나 26S proteasome의 선택적 억제제인 lactacystin, the lysosome 억제제인 ammonium chloride 및 chloroquine, serine protease 억제제인 PMSF는 동일 조건에서 lovastatin과 actinomycin D 처리에 의한 cyclin D3의 발현저하를 억제하지는 못하였다. In vitro 조건에서 순수 분리된 calpain은 cyclin D3 단백질을 $Ca^{2+}$ 농도 의존적으로 분해하였으며, cyclin D3 단백질의 half-life는 LLnL 처리에 의하여 매우 유의적으로 증가되었다. 이러한 결과는 cyclin D3 단백질이 $Ca^{2+}$에 의해 활성화 되는 protease calpain에 의해 조절됨을 보여준다.