• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.129-131
• /
• 2001

This paper represents the method is to design thin film spiral type inductor using the analytic method and to evaluate the characteristics of the high frequency inductors using HFSS simulation program. The magnetic circuit of the thin film inductor can be successfully simulated by the HFSS.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.7 s.98
• /
• pp.720-731
• /
• 2005

In this paper, radiation patterns of electrically small inverted-F antennas(IFAs) on an electrically large cylindrical conducting body like a satellite launcher are experimentally studied. First, radiation patterns are obtained by using method of moment and a commercial software tool, HFSS(High Frequency Structure Simulator) and the results are compared and analyzed with experimental ones. Especially, when the size of a cylindrical conducting body is electrically large, the effects of the size of a cylindrical conducting body on radiation patterns are studied by considering only the partial ground in vicinity of antennas. And then, when one and two inverted-F antennas are on the cylindrical conducting body, radiation patterns are simulated and investigated by using method of moment and HFSS. Good agreements are observed among the results by method of moment, HFSS, and experiments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.133-139
• /
• 2012

Currently, we are living in the world of invisible radio waves with a variety of frequencies. As today's society is rapidly changing to an era of wireless communication, the importances of antenna(especially, small patch antenna) are increasing according to the coming of wireless mobile communication society. In this paper, we design a small patch antenna which can support the functions of DMB and GPS through devices like cellular phone. The main feature and contribution of the designed patch antenna are as follows. First, the patch antenna is designed by HFSS and the ceramic materials for the patch antenna is utilized. Second, we obtain the patch antenna with reduced size and increased profit of reception, and the designed patch antenna can be applied for small devices.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.5
• /
• pp.53-59
• /
• 2010

There are various types of antenna fed method; coaxial probe, coupling, parasitic elements, and impedance matching. In this paper, the fed method of the proposed antenna is microstrip line type. The high frequency structure simulator (HFSS) is used to analyze the characteristics of the T-shaped microstrip antenna with various patch dimensions. In comparison with the basic microstrip antenna, this proposed T-shaped microstrip antenna with 40.38 % of patch dimensions has the optimum characteristics of resonant frequency, return loss, and radiation pattern at 2.0 GHz band.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.779-783
• /
• 2012

In this paper, we studied the design and fabrication of $2{\times}2$ array-type microstrip patch antenna to be used in wireless communication systems operating at around 5GHz band. To obtain wide bandwidth and high gain, antenna parameters such as patch size, inter patch space are simulated by HFSS(High Frequency Structure Simulator). From these parameters, the $2{\times}2$ array-type microstrip patch antenna is fabricated using FR-4 substrate. The measured results of the antenna are as follows: The center frequency of 5.06GHz, insertion loss of -44dB, bandwidth of 200MHz, and VWSR of 1.1.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.3
• /
• pp.39-43
• /
• 2011

Effects of cavity material on the Q-factor measurement of microwave dielectric materials were studied by HFSS simulation and the measurements using metal cavity. $TE_{01\delta}$ mode resonant frequency was determined from the electric and magnetic field patterns and the loaded Q-factor was calculated from 3dB bandwidth of $S_{21}$ spectrum. When the cavity metal materials were Cu, SUS and Au cavity, the level of Q-factor was similar. However, Q-factor was significantly decreased when the cavity metal material was CuO. The Q-factor measurements of dielectric resonator by network analyzer using various metal cavity exhibits consistent behavior.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.4
• /
• pp.63-68
• /
• 2005

In this paper, the single coaxial fed and circularly polarized patch antenna for the RFID system in 2.45GHz ISM band has been fabricated. The simulation by HFSS, electro-magnetic field simulator was executed in order to decide the location of feed which is difficult to be analysed. The simulated result has the same tendency as the measured one in the view of input impedance with the variation of feed location. VSWR of fabricated antenna is low($\leq$1.2) even in comparatively high dielectric loss epoxy substrate(FR4), and this value is enough for the application of RFID reader antenna.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1003-1008
• /
• 2017

In this paper, we studied the design and fabrication of double T Structure with CPW antenna at around 5 GHz band.. To improve of frequency properties of antenna, Double T Structure with CPW antenna was simulated by HFSS(: High Frequency Structure Simulator). A double T Structure with CPW antenna was designed and fabricated by photolithograph on an FR4 substrate (dielectric constant of 4.4 and thickness of 1.6 mm). The fabricated A double T Structure with CPW antenna showed a center frequency, the minimum return loss and impedance were 5.29GHz, -34dB, and 390MHz, $49.6{\Omega}$ respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.352-352
• /
• 2008

폐 자기회로 구조를 갖는 Meander 형태의 Inductor 설계를 위해 HFSS 프로그램을 이용하여 Meander Inductor를 시뮬레이션 하였다. Meander Inductor의 turn 수(N) 및 폭(W), 두께(T), 랩(G)의 변화에 따른 인덕턴스(L), S-parameter(S)와 Q-factor(Q)의 변화를 HFSS 를 통해 측정하였다. Al2O3 기판과 MgO의 두께는 각각 680um, 50um로 고정하였고, silver electrode를 이용하여 Meander 타입의 Inductor를 설계하였다. Meander Inductor의 turn수(6,7,8turn)의 변화를 측정한 결과, 8턴이었을 때 Q-factor가 19로서 가장 높은 결과를 얻었다. L의 결과 값은 공진 주파수와 의 관계에 의해 6turn일 때 L값은 17GHz에서 공진현상이 나타났다. 또한 W, G, T에 변화를 주어 설계한 뒤 시뮬레이션의 결과 값을 측정하였다. 그 값을 서로 비교한 결과, 변수들의 변화에 따라 L값과 Q-factor가 변화되었다. 이 논문에서는 각 변수에 따른 meander inductor의 특성을 HFSS 시뮬레이션을 통해 비교하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.145-150
• /
• 2008

This paper suggests an applicable study on Helix TWT of Slow-Wave Structure for Surveillance RADAR. In order to improve Slow-Wave Structure performance and analysis, we design and realizer a Helix TWTA using a HFSS Code and LMSuite Code, Through the cutting and simulation of Helix TWTA, this parameter satisfies the design specifications, Therefore, this specifics is very useful and can be used to develop the similar equipments.