• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.487-491
• /
• 2003

Design procedure of corrugated horn antenna for mm-wave frequency range is presented, and hybrid condition in horn is calculated. Balanced hybrid mode should be converted in the horn from TE11 mode by the proper corrugation dimensions which size are available to be fabricated under the mm-wave short wavelength condition. In this paper, corrugate profiles which satisfy both hybrid condition and fabrication possibility are obtained.. By cylindrical mode theory, the electromagnetic fields both inside hem and corrugation are delivered. Propagation characteristics in hem is calculated by the mode impedance matching method with boundary conditions, and radiation fields are obtained by the Kirchhoff-Hyugen principle to the hem aperture fields. A mm-wave corrugated horn operates on 85 - 115GHz is designed and fabricated, and results of measurement are also shown.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.727-728
• /
• 2006

The present work studies the influence of high-energy milling (HEM) and sintering cycle of Ti and Al powders on the obtainment of TiAl. This study shows that HEM modifies the diffusion processes during the sintering stage. The samples were obtained by cold uniaxial and isostatic pressing, pre-sintered at different temperatures, and heated up to the sintering temperature. This study also shows the effect of powder additions processed by HEM on the sintering behavior of elemental Ti and Al powders.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.983-988
• /
• 2000

Anchoring systems with structural stability and endurance have been one of the most important elements for PSC structures, especially for the structures using non-corrosive FRP tendons. FRP tendons are in increasing use for underground and coastal structures constantly contacted with fresh water or sea water because of their superiority to metallic ones in corrosion-resistance. In this study new non-metallic anchoring system for FRP tendons has been tested and investigated. The newly developed anchoring system utilizes FRP pipes and HEM (Highly Expansive Mortar). The major factors considered in this experiment were expansive pressure of HEM during its hydration and the strength of GFRP(Glass Fiber Reinforced Plastic) Pipe. Anchoring forces of the new anchoring system were investigated from the pull-out testes. The authors analyzed pull-out procedures of the FRP tendons in the various pipe filled with HEM and suggested an improved idea to develop novel non-metallic anchoring system for FRP tendons

• The Research Journal of the Costume Culture
• /
• v.17 no.3
• /
• pp.499-511
• /
• 2009

As the demand of the consumer for high-sense clothing, relation with materials is becoming important even in clothing construction. Especially, the cutting angle of materials is becoming an crucial element in the formation of silhouette, and drape of Hem line, of skirts. Accordingly, in this study, Hem line shapes between real clothing and 3D virtual clothing of "i-Designer" were analyzed by manufacturing semi-flare skirts of polyester 100% according to a cutting angle, and the results are as follows. As a result of comparison of silhouette between the real clothing and the virtual clothing, the real and the virtual have a similar feeling regardless of a cutting angle. In case of drape shapes, both the front and the lateral side were represented in almost similar shapes. The back side, however, the real and the virtual showed a great difference in case of grain direction. And in the whole silhouette, the real and the virtual were represented similarly. It could be known that with regard to Hem-line drape shapes between the real clothing and the virtual according to a cutting angle, the real clothing is represented in a location farther from the body than the virtual clothing and, the location or number of node was similarly showed in the real and the virtual.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.655-662
• /
• 2003

A rigorous field analysis by the non-decaying mode and the contour graph method is presented for dielectric-rod loaded cylindrical cavity resonators. Resonant frequencies and the lowest order modes for this resonator are calculated. The mode charts are presented to design the resonators. TE mode(transverse electric or H mode, having no Ez), TM mode(transverse magnetic or I mode, having no ㎐) and HEM mode(hybrid electromagnetic mode, having non-zero Ez and ㎐) are analyzed in detail using non-decaying mode method. The mode charts are completed. The validity of the theory is confirmed by experiments. The results were on the whole satisfactory. Experimental measurements show excellent agrement with the numerical results. The average error of TE, TM, and HEM mode is about 0.20 %, 0.14 %, and 0.28 %, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.6
• /
• pp.976-983
• /
• 2003

Seven Escherichia coli cells defective with aerobic growth were isolated by the insertion of ${\lambda}placMu53$, a hybrid bacteriophage of ${\lambda}$ and Mu, which created a transcriptional fusion to lacZY. These insertion mutant cells were tested on an XG ($5-bromo-4-chloro-3-indolyl-{\beta}-D-galactopyranoside$) medium for anaerobic expression of lacZ by fusion to a promoter. The chromosomal DNA from these strains were digested by EcoRI, and the EcoRI fragments that contained the fused gene and lacZ sequence were identified by Southern hybridization, using lacZ containing plasmid as a probe. The EcoRI fragment from each strain was cloned and sequenced. The sequence data were compared with the GenBank database. The mutated gene of three strains, CYT4, CYT5, and OS11, was found to be identical, and it was nrdAB that encoded ribonucleoside diphosphate reductase. The gene nrdAB was at min 50.5 on the Escherichia coli linkage map and 2,348,084 on the physical map, and is involved in hemAe-related reduction-oxidation reaction. OS6 and OS14 mutant strains had insertion at min 8.3 and the mutated gene was hemB. The hemB encodes 5-aminolevulinate dehydratase or porphobilinogen synthase. The OS3 mutant had insertion in cydB at min 16.6. The cydAB encodes cytochrome d oxidase. In the case of OS1, the fusion was made with sucA, the E1 component of ${\alpha}-ketoglutarate$ dehydrogenase.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.6
• /
• pp.1136-1140
• /
• 2008

The Rhodopseudomonas palustris KUGB306 hemA gene codes for 5-aminolevulinic acid (ALA) synthase. This enzyme catalyzes the condensation of glycine and succinyl-CoA to yield ALA in the presence of the cofactor pyridoxal 5'-phosphate. The R. palustris KUGB306 hemA gene in the pGEX-KG vector system was transformed into Escherichia coli BL21. The effects of physiological factors on the extracellular production of ALA by the recombinant E. coli were studied. Terrific Broth (TB) medium resulted in significantly higher cell growth and ALA production than did Luria-Bertani (LB) medium. ALA production was significantly enhanced by the addition of succinate together with glycine in the medium. Maximal ALA production (2.5 g/l) was observed upon the addition of D-glucose as an ALA dehydratase inhibitor in the late-log culture phase. Based on the results obtained from the shake-flask cultures, fermentation was carried out using the recombinant E. coli in TB medium, with the initial addition of 90 mM glycine and 120 mM succinate, and the addition of 45 mM D-glucose in the late-log phase. The extracellular production of ALA was also influenced by the pH of the culture broth. We maintained a pH of 6.5 in the fermenter throughout the culture process, achieving the maximal levels of extracellular ALA production (5.15 g/l, 39.3 mM).

• Journal of Applied Biological Chemistry
• /
• v.58 no.4
• /
• pp.333-338
• /
• 2015

The objective of this study was to investigate the whitening effect of Salvia miltorrhiza Bunge water extract (SM-W) in human epidermal melanocyte (HEM). Mushroom tyrosinase inhibitory effect of SM-W was approximately 42% at $1,000{\mu}g/mL$. The HEM cellular tyrosinase and melanin synthesis inhibition activity were 26 and 25% at $5{\mu}g/mL$, respectively. Whitening related proteins and mRNAs including tyrosinase, tyrosinase related protein 1 (TRP-1) and TRP-2, and microphthalmia associated transcription factor were reduced by SM-W treatment. In addition, the cAMP expression inhibitory effect of SM-W was decreased by 41% at $5{\mu}g/mL$ concentration. These results indicated that Salvia miltorrhiza Bunge could be used to the possible utilization of functional cosmetic ingredients by confirming whitening activity related with melanin content.

• Journal of the Korean Society of Costume
• /
• v.59 no.9
• /
• pp.26-42
• /
• 2009

The purpose of this study is to examine how to sew the hem of men's coat which were excavated from the Yeosan Song Clan's tombs that are thought to be formed between the late 15th and the late 16th centuries, findings of the study can be summarized as follows. 1. Andan, or inside facing was used to prevent the hem from being worn or swollen or to make the hem properly arranged. It was generally used for single-layered and cotton-quilted coat for men. Deotdan was used mainly for men's coat having oblique cutting lines and jemuldan for those having straight cutting lines. In single-layed coat for men, the width of andan was widened a little as the times moved from the late 15th to the late 16th century, but in cotton-quilted ones, the width was not significantly changed. 2. Fixing the lining and the upper was used as a method to prevent the lining of men's coat from being pushed out or the hem of the clothes from being swollen. The method was generally used for double-layered, cotton and cotton-quilted coat for men. The double back-stitching was usually used for double-layered and cotton coat for men and the broad-stitching for Cotton-quilted ones. 3. Among men's coat, those whose siding was partially opened were less spare in the lower end than those whose siding was wholly opened. For this reason, the former clothes were more likely to have the tip of the siding easily torn. To solve this problem, overhand knotting 1, overhand knotting 2 and lotus-flower knotting strings were used for men's coat whose siding was partially opened. Among the three types, lotus-flower knotting was most elaborate in form. For men's coat, overhand knotting became gradually replaced by lotus-flower knotting as the times moved from the late 15th to the late 16th century.

• The Research Journal of the Costume Culture
• /
• v.23 no.2
• /
• pp.284-293
• /
• 2015

This study intends to analyze the fit of directly-imported American casual pants for Korean female college students in terms of appearance and comfortableness. The authors carried out a wearing test with sample pants from 3 brands (DKNY: A, Gap: B, Polo: C) that had the most market share and that were mostly preferred by Korean female college students. Results showed that pants A had insufficient ease in the crotch, as the depth of the crotch was short. The hip girth received a low assessment in terms of appearance. Moreover, the hem widths were wide while the pants length was long. Pants B were expected to be most appropriate for Korean women's bodies, as they had the longest crotch depth among the three brands. However, the pants appeared to pull downward due to the narrow thigh and the knee girth and hem width. Moreover, the crotch girth and hip girth received a poor appearance assessment. Pants C were rated as satisfactory for their thigh girth, knee girth, and hem width. However, the crotch was uncomfortable, as it had a short crotch depth. The hip girth received a low appearance assessment. This study suggests that a pattern adjustment is required for directly-imported American pants to provide a better fit for the bodies of Korean women. The crotch depths should be approximately 17.5 cm. The hem widths should be approximately 20 cm. We also suggest a leg length of 75 cm, a waist girth of 86 cm, and a hip girth of 97 cm.