• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.289-293
• /
• 2004

In this paper, data rate of VDSL system was analyzed in RFI(Radio Frequency Interference) environment. This Paper used Various 'VDSL Test Loop' suggested by ANSI DSL Standard group TIE1.4.Many parameters, 'Noise Model A', 'Noise Model F' and KARL-HAM band are used for more accurate results of the simulation. Most of conditions for simulation are followed to the ANSI Standard 'Spectrum management'. Many results have been calculated according to the different conditions of the test loops in simulation. Simulation results confirm that using shaped PSD mask to reject RFI is one of factor to decrease the performance of VDSL systems.

• 한국축산식품학회지
• /
• 제35권5호
• /
• pp.674-682
• /
• 2015

The objective of this study was to evaluate the risk of illness from Campylobacter spp. on ham. To identify the hazards of Campylobacter spp. on ham, the general characteristics and microbial criteria for Campylobacter spp., and campylobacteriosis outbreaks were investigated. In the exposure assessment, the prevalence of Campylobacter spp. on ham was evaluated, and the probabilistic distributions for the temperature of ham surfaces in retail markets and home refrigerators were prepared. In addition, the raw data from the Korea National Health and Nutrition Examination Survey (KNHNES) 2012 were used to estimate the consumption amount and frequency of ham. In the hazard characterization, the Beta-Poisson model for Campylobacter spp. infection was used. For risk characterization, a simulation model was developed using the collected data, and the risk of Campylobacter spp. on ham was estimated with @RISK. The Campylobacter spp. cell counts on ham samples were below the detection limit (<0.70 Log CFU/g). The daily consumption of ham was 23.93 g per person, and the consumption frequency was 11.57%. The simulated mean value of the initial contamination level of Campylobacter spp. on ham was −3.95 Log CFU/g, and the mean value of ham for probable risk per person per day was 2.20×10⁻¹². It is considered that the risk of foodborne illness for Campylobacter spp. was low. Furthermore, these results indicate that the microbial risk assessment of Campylobacter spp. in this study should be useful in providing scientific evidence to set up the criteria of Campylobacter spp..

• 한국지역사회생활과학회지
• /
• 제24권3호
• /
• pp.399-409
• /
• 2013

The purpose of this study is to compare how the number of panels, the amount of flare and the flare starting point affect the silhouette of the gored skirt. This study consisted of (1) creation of 3D body representations (2) comparison of silhouette between 3D virtual gored skirt and actual gored skirt by pilot experiment (3) pattern drafting of twenty-seven different gored skirts for 3D body representations (4) a computer simulation of twenty-seven different gored skirts for visualization and assessment (5) visual inspection of twenty-seven different 3D virtual gored skirts (6) comparison of ham shapes and measurements for the node and size analysis. A visual inspection of twenty-seven different 3D virtual gored skirts showed clear differences by the amount of flare and the flare starting point ; however, there was notably less difference in the width of ham among six-piece, eight-piece and ten-piece panels. This demonstrated that there was less influence on the number of panels than the amount of flare width of ham and extent of ham for the 3D virtual gored skirt.

• 한국CDE학회지
• /
• 제21권2호
• /
• pp.65-68
• /
• 2015

Creative selfie stick design using FreeCAD and Ansys.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.514-517
• /
• 2015

Creative selfie stick design using freecad, ansys.

• 한국위성정보통신학회논문지
• /
• 제10권1호
• /
• pp.12-16
• /
• 2015

본 논문에서는 아마추어 무선 HR(HAM Radio)을 기반으로 구축되는 새로운 무선 재난통신망인 이동단말용 위성 통신 무선패키지 시스템을 소개하고, D2D 다중 홉 기반의 재난통신망 접속에서 D2D 단말이 인접 기지국과 D2D 그룹들에 의해 간섭을 받는 간섭 시나리오를 구성하였다. 이러한 간섭 시나리오에서 D2D 단말이 재난통신시 필요한 채널용량 확보하고 재난통신망에 원활하게 접속, 통신할 수 있도록 주파수 재할당 방법을 제시하였고, 제안한 기법의 성능을 컴퓨터 시뮬레이션을 통해 기존 알고리즘 대비 시스템 Throughput 성능 개선 및 BER 성능에서 최대 1.5dB 이득이 있음을 확인하였다.

• 전기학회논문지P
• /
• 제52권3호
• /
• pp.113-120
• /
• 2003

Plasma display panels normally utilize the binary coded light emission scheme for gray scale expression. Subsequently, this expression method makes dynamic false contours. We propose the "E3DSM(enhanced 3-dimension scattering method)" that improved existing 3-d scattering method and the "HAM(histogram analysis method)" that is decided the driving schemes and subfield selections with histograms of images. Simulation results show the improving image quality.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.1076-1079
• /
• 1997

A new 3D micromachining method, called Hole Area Modulation(HAM), has been introduced and experimentally confirmed its feasibility. In this method, information on the depth of machining is converted to the sizes of small holes in the mask. The machining is carried out with a simple 2D movement of the workpiece. This method can be applied for machining various kinds of microcavities in various materials. In this paper, a mathematical model for excimer laser micromachining based on HAM and also determination of the optimal laser ablation conditions(width, Hole radius, step size, path, etc.) is completed by employing using Genetic Algorithm(GA).

• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.17-23
• /
• 2002

A new 3D micromachining method called Hole Area Modulation(HAM), has been introduced to enhance the current micromachining technology. In this method, information on the depth of machining is converted to the sizes of small holes in the mask. The machining is carried out with a simple 2D movement of the workpiece. This method can be applied for machining various kinds of microcavities in various materials. In this paper, a machematical model for excimer laser micromachining based on HAM and also determination of optimal laser ablation conditions(width hole radius, step size, path, etc.) is performed by Genetic Algorithm(GA).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.53.5-53
• /
• 2002

1. Introduction 2. PCI Local Bus Specification Abstract 3. Design Embedded PCI Local Bus 4. Simulation Results 5. DAS Application Design Methodology 6. Conclusion