• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.216-218
• /
• 1999

This paper presents an advanced virtual lecture system for power system which is based on web. So far, conventional web-based virtual lecture systems which simply would use hyper-text couldn't use characteristics of multimedia in web. Comparing with printed publication, such conventional virtual lecture systems as only display on monitor couldn't be superior in validity and effectiveness. So, in this paper the proposed virtual lecture system uses web-based multimedia functions, including lecture-note and AOD(Audio on Demand), in order to overcome an individual difference of learning efficiency and suggests simple simulation programs for lecture contents which can be performed directly in on-line.

• Transactions of Materials Processing
• /
• v.29 no.6
• /
• pp.347-355
• /
• 2020

The mechanical responses of multilayered aluminum sheet fabricated by roll bonding, i.e., A1050/A3004 (65% A1050, 35% A3004 by thickness), were investigated via combined experiment and finite element (FE) analysis. The mechanical properties were measured using uniaxial tensile tests in various loading directions for the multilayered sheet. The corresponding tests for individual layers were also conducted. The testing samples were prepared by wire electro discharge machining (EDM). Stress-strain curves and Lankford coefficients of the multilayered sheet were then predicted by FE simulations. The measured mechanical properties of the individual layers were utilized as inputs for the simulation. Two yield functions, i.e., isotropic von-Mises and anisotropic non-quadratic Hill1948, were employed. Predicted results were compared with the experimental data and further discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.37.2-37
• /
• 2001

This paper addresses the robust adaptive output feedback tracking for nonlinear systems under disturbances whose bounds are unknown. A new algorithm is proposed for estimation of unknown bounds and adaptive control of the uncertain nonlinear systems. The State estimation is solved using K-filters, together with the construction of a bound of an error in the state estimation due to the perturbation of the disturbance. Tuning functions are used to estimate unknown system parameters without overparametrization. The proposed control algorithm ensures that the out put tracking error converges to a residual set which can be arbitrarily small, while maintaining the boundedness of all other variables. A simulation shows the effectiveness of the proposed approach

• Journal of electromagnetic engineering and science
• /
• v.13 no.4
• /
• pp.240-244
• /
• 2013

In this paper, we present an improvement of a closed-form formula for mutual impedance computation. Depending on the center-to-center spacing between two rectangular microstrip patch antennas, the mutual impedance formula is separated into two parts. The formula based on synthetic asymptote and variable separation is utilized for spacings of more than 0.5 ${\lambda}_0$. When the spacing is less than 0.5 ${\lambda}_0$, an approximate formula is proposed to improve the computation for closely spaced elements. Simulation results are compared to computational results of mutual impedances and mutual coupling coefficients as functions of normalized center-to-center spacing in both E- and H-plane coupling configurations. A good agreement between simulation and computation is achieved.

• International Journal of Safety
• /
• v.6 no.1
• /
• pp.16-21
• /
• 2007

Carbon nanotubes hold much promise as future materials for safe storage of hydrogen. In this paper, hydrogen transport mechanisms in single-walled carbon nano-tubes (SWNTs) for various temperatures and chiral indices were studied using molecular dynamics simulation method. The SWNT models of zigzag (10,0), chiral (10,5) and armchair (10,10) with hydrogen molecules inside were simulated at temperatures ranging from 253K to 373K. Movements of hydrogen molecules ($H_2$) inside a SWNT were analyzed using mean-square displacements and velocity autocorrelation functions.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3_1spc
• /
• pp.566-572
• /
• 2013

In this study, a collision simulator for rolling stock that considers the plastic deformation of the car body and the dynamic characteristics of a coupler system was developed using Matlab/Simulink. Normally, a coupler system has functions for both connecting the individual car bodies and absorbing the impact energy. A coupler system is composed of a rubber buffer, hydraulic buffer, and deformation tube elements. The coupler system should protect the car body and prevent damage when the shunt speed is less than 10 km/h, which is the regulation speed based on the safety rule for rolling stock. However, if the shunt speed is greater than 10 km/h, a car body is plastically deformed. Therefore, the modeling of the plastic deformation of a car body should be included in a simulator. This collision simulator can provide the design parameters for a coupler system and car body.

• Advances in aircraft and spacecraft science
• /
• v.9 no.3
• /
• pp.263-278
• /
• 2022

The time-varying structural reliability of an aeroelastic launch vehicle subjected to stochastic parameters is investigated. The launch vehicle structure is under the combined action of several stochastic loads that include aerodynamics, thrust as well as internal combustion pressure. The launch vehicle's main body structural flexibility is modeled via the normal mode shapes of a free-free Euler beam, where the aerodynamic loadings on the vehicle are due to force on each incremental section of the vehicle. The rigid and elastic coupled nonlinear equations of motion are derived following the Lagrangian approach that results in a complete aeroelastic simulation for the prediction of the instantaneous launch vehicle rigid-body motion as well as the body elastic deformations. Reliability analysis has been performed based on two distinct limit state functions, defined as the maximum launch vehicle tip elastic deformation and also the maximum allowable stress occurring along the launch vehicle total length. In this fashion, the time-dependent reliability problem can be converted into an equivalent time-invariant reliability problem. Subsequently, the first-order reliability method, as well as the Monte Carlo simulation schemes, are employed to determine and verify the aeroelastic launch vehicle dynamic failure probability for a given flight time.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.6
• /
• pp.429-434
• /
• 2016

This paper introduces a stabilization condition for polynomial fuzzy systems that guarantees $H_{\infty}$ performance under the imperfect premise matching. An $H_{\infty}$ control of polynomial fuzzy systems attenuates the effect of external disturbance. Under the imperfect premise matching, a polynomial fuzzy model and controller do not share the same membership functions. Therefore, a polynomial fuzzy controller has an enhanced design flexibility and inherent robustness to handle parameter uncertainties. In this paper, the stabilization conditions are derived from the polynomial Lyapunov function and numerically solved by the sum-of-squares (SOS) method. A simulation example and comparison of the performance are provided to verify the stability analysis results and demonstrate the effectiveness of the proposed stabilization conditions.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2005.09a
• /
• pp.383-387
• /
• 2005

One of the most important issues in post-genome era is identifying functions of genes and understanding the interaction among them. Such interactions from complex biochemical pathways, which are very useful to understand the organism system. We present an integrated biochemical pathway database system with a set of software tools for reconstruction, visualization, and simulation of the pathways from the database. The novel features of the presented system include: (a) automatic integration of the heterogeneous biochemical pathway databases, (b) gene ontology for high quality of database in the integration and query (c) various biochemical simulations on the pathway database, (d) dynamic pathway reconstruction for the gene list or sequence data, (e) graphical tools which enable users to view the reconstructed pathways in a dynamic form, (f) importing/exporting SBML documents, a data exchange standard for systems biology.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.59-61
• /
• 2003

The natural element method is a kind of meshless Galerkin method. The shape function is derived from the natural neighbor coordinates interpolation scheme. Natural neighbor shape functions are $C^0$ everywhere, except the nodes where they are $C^0$. The numerical integration is carried out using the Delaunay triangles as the background cells. The method is applied to the test problems and simulation results show that the natural element method can give accurate solutions for the electromagnetic field problems.