우리나라에서 2000년도에 발생된 전기로 및 전로슬래그를 합하면 약 600만 톤 정도로서 주로 도로포장재료 및 매립재 등과 같은 한정된 용도로만 활용되어 왔다. 그 이유는 제강과정 중 유리석회가 슬래그화 되지 않고 불안정한 상태로 슬래그 내부에 잔존하기 때문에 콘크리트 구조물 내에서 팽창을 일으킬 가능성이 클 뿐만 아니라, 팽창이 심할 경우 구조물의 균열 내지는 붕괴까지도 야기 시킬 수 있으므로 콘크리트용 골재로 사용해서는 안 된다고 규정하고 있다. 따라서 제강슬래그를 콘크리트용 골재로 사용하기 위해서는 제강슬래그 자체의 팽창성 억제 내지는 안정화 처리가 우선 해결되어야 할 과제로 생각된다. 본 연구에서는 제강슬래그 골재의 팽창성을 저감시키기 위한 목적으로 6종류의 에이징 방법을 선정하여 안정화의 효율에 대하여 비교 검토하였다. 전로슬래그 골재의 경우, 본 연구에서 실시한 에이징 처리 방법으로서는 콘크리트용 골재로서 요구되는 팽창률을 저감시키는데 한계가 있었을 뿐만 아니라, 에이징 처리한 전로슬래그 골재 사용 콘크리트의 강도도 재령과 더불어 감소하는 문제점이 있음을 확인하였다. 그러나 전기로슬래그 골재를 온수중 및 증기중 에이징 처리할 경우, 팽창률이 전로슬래그 골재의 약 2/3 정도에 지나지 않는 효율을 나타내었으며, 이를 사용한 콘크리트의 강도도 전로슬래그 골재 사용 콘크리트와는 달리 보통콘크리트의 강도에 상응하는 비교적 좋은 결과를 나타내므로 콘크리트용 골재로서 사용 가능성을 시사하였다.
본 연구에서는 정격출력 870MW, 대향류 석탄보일러의 최상부층 버너운전에 따른 보일러 연소상태 변화와 보일러 효율을 측정하였다. 시험방법은 하부와 중간층 버너가 운전중인 상태에서 최상부층 전방버너, 전,후방 버너 동시 운전, 후방 버너 운전으로 구분하여 최상부층 버너 운전에 따른 보일러 효율을 측정하였으며 시험 결과 최상부층 전 후방 버너 동시운전 > 최상부층 전방 버너 > 최상부층 후방 버너 운전의 순으로 보일러 효율이 높게 나타났다. 최상부층 전방과 후방 버너를 동시에 운전할 경우 보일러 노 내 열흡수율 증가 및 대류전열면 좌우 증기온도 편차가 감소되었다. 보일러 열흡수율 개선에 따라 보일러 배기가스손실 감소 및 석탄공급량이 후방버너 운전 대비 8t/h 감소하였으며, 이는 연료비 절감은 물론 온실가스 배출량 감축에도 크게 기여할 것으로 판단된다.
SDE추출방법 과 GC/MS로 분석에 의하여 생마늘과 동결 건조마늘의 휘발성 유기성분을 비교하였다. 생마늘과 동결 건조마늘에서 각각 42종, 32종의 화합물이 확인되었으며 , 대부분이 황화합물이었고 alcohol류, aldehyde류, ester류도 확인되었다. Diallyl disulfide, diallyl trisulfide, allyl methyl disulfide, allyl methyl trisulfide는 생마늘과 동결건조마늘 에서 확인된 주요 황화합물이었다. 3-Methyl pyridine, 2-methyl-4-pentenal, 2,3,3-trimethyl-1,4=pentadiene, methional등 생마늘에서 확인된 화합물은 동결건조마늘에서 소실되었고 propanethiol, 2-ethyl-3-butenal, acetic acid 등은 동결건조마늘에서 확인되었으며, 전체적인 휘발성 유기성분의 총량에는 영향을 미치지 않는 수준이었다. 동결건조에 의 하여 마늘의 주요 휘발성 유기성분 중 diallyl disulfide, diallyl trisulfide, allyl methyl disulfide, allyl methyl trisulfide, diallyl sulfide,3-vinyl-4H-1,2-dithiin 등 대부분의 황화합물 함량이 감소하였으며 methyl propyl trisulfide, 3- allylthiopropionic acid, cyclopentyl ethyl sulfide 등은 증가하였다. 그 외 ethyl acetate, ethanol,2-propenol, 2-propenal, hexanal 등의 휘발성 유기성분이 증가하는 것을 확인하였다.
수소의 소규모 분산 생산 기술은 본격 적 인 수소 인프라가 도입되기 전에 연료전지 자동차의 수소 충전용이나 분산 발전형 연료전지의 수소 공급을 위해 필요하다. 생산 용량은 수소 기준으로 $20{\sim}100 Nm^3/hr$ 정도로 현재로선 천연가스의 수증기 개 질법이 가장 경제적인 공정으로 알려져 있다. 소규모 생산에 따른 열효율 저하를 줄이 기 위해 단위 공정들이 통합된 컴팩트 개질 시스템의 개발이 필요하다. 연료전지 자동차용 수소 인프라 조기 구축을 위하여 수소충전소 구축과 국산화 천연가스 수증기 개질기 개발을 병행하여 진행하였다. 수소 충전소 구축 부분은 충전소 부지 확보, 건물 건축, 각종 유틸리 티 설치의 토목 부분과 천연가스 개질형 수소 제조 유닛 설치, 수소 압축, 저장, 디스펜싱 시스템 설치를 포함하고 있으며 고압 설비에 대한 인허가 대응 및 안전대책 작업도 진행하였다. 구축된 수소충전소는 향후 연료전지 자동차 연계 실증 프로그램에 활용할 수 있다. 국산화 핵심 기술 개발을 위하여 열 및 시스템 통합 설계에 의 해 천연가스 수증기 개질기를 제작하고 내부 열교환 구조에 따른 개질기의 성능을 평가하였다. 개발된 개질기는 개질온도 $720^{\circ}C$, 수증기 대 카본 비 2.7의 운전조건에서 $23Nm^3/h$ 이상의 수소 생산이 가능하였으며 73% 이상의 개질 효율을 나타내었다. 개발된 천연가스 수증기 개질기는 향후 수소 정제용 PSA(Pressure Swing Adsorption) 시스템과 연계하여 수소충전소 국산화 엔지니어링 설계 패키지 개발의 핵심 기 술로 사용할 계획이다.시간 정도 운전한 후 시스템을 정지하였다 메탄 전환율과 일산화 탄소 농도, 열효율을 모니터링 하고 있으며, 현재까지 초기 성능을 그대로 유지하고 있다. 앞으로 일일시동-정지 운전 시험을 지속하면서 초기 시동 특성 및 부하 변동에 따른 응답 특성 개선, 그리고 연료전지와의 연계 운전을 실시할 예정이다 한다. 단위 전지 운전 온도 $130^{\circ}C$, 상대습도 37%의 운전 조건에서도 상당히 우수한 전지 성능을 보임에 따라 고온/저가습 조건에서 상용 Nafion 112 막보다 우수한 막 특성을 나타냄을 확인하였다.소/배후방사능비는 각각 $2.18{\pm}0.03,\;2.56{\pm}0.11,\;3.08{\pm}0.18,\;3.77{\pm}0.17,\;4.70{\pm}0.45$ 그리고 $5.59{\pm}0.40$이었고, $^{67}Ga$-citrate의 경우 2시간, 24시간, 48시간에 $3.06{\pm}0.84,\;4.12{\pm}0.54\;4.55{\pm}0.74 $이었다. 결론 : Transferrin에 $^{99m}Tc$을 이용한 방사성표지가 성공적으로 이루어졌고, $^{99m}Tc$-transferrin의 표지효율은 8시간까지 95% 이상의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수 있었다. 그러므로 $^{
김치를 이용한 고기 스테이크 소스를 동시 증류 추출법을 이용해 얻은 휘발성 성분을 분석한 결과 23종의 성분이 분리 동정되었다. 분리동정된 화합물들 중에서 aldehydes가 5종으로 가장 많았고, alcohols 4종, acids가 4종, 함황화합물이 3종, ketone 1종 그외 기타화합물 6종으로 나타났다. 분리 동정된 성분들 중 eugenol 성분이 39.40%로 가장 많았고, 다음은 dodecanoic acid 4.91%, acetic acid 1.70%, methyl 2-propenyl disulfide 1.52%, hexanal 1.51%, 2-pentylfuran 1.18%를 차지하는 것으로 나타났다. 김치의 휘발성 성분 중 김치의 휘발성 향기 성분에는 diallyl disulfide, dimethyl trisulfide등의 sulfide류와 acetic acid, decanoic acid, dodecanoic acid 등의 acid류가 영향을 많이 미치는 것으로 나타났다. 시료를 3배씩 희석하여 실시한 olfactory 검사에서는 RI 값 1030에서 1357까지는 대체적으로 달콤한 사탕의 향기가 강하게 나타났고, RI 1561에서는 좋지 않은 냄새가 나타났으며, RI 2000에서는 alkane향이 GC/O에서 강한 시큼한 김치 냄새가 나타났다. RI 2057에서는 sweet한 냄새가 났었고, RI 2122에서는 clover향이 나타나 eugenol 화합물로 확인되었다. RI 2251에는 rancid 향이 강하게 나타났다. 따라서 김치를 주재료로 한 스테이크용 소스는 김치를 담근지 2주 정도가 경과된 $pH\;4.0{\sim}4.7$, 총산도 $0.5{\sim}0.8%$ 김치를 이용하여 소스로 만들었을 경우에 휘발성 성분의 품질에 영향을 미치며, 이를 이용하여 상품화한다면 우리나라 전통식품을 이용한 수출용 산업대체 식품으로 더욱 더 폭넓게 이용될 수 있을 것으로 사료된다.
유탕면류의 HACCP(Hazard Analysis Critical Control Point) 시스템 구축을 위하여 유탕 공정-CCP(Critical Control Point)에 대한 미생물학적(Biological hazards)과 화학적(Chemical hazards) 한계 기준 설정을 위한 목적으로 수행하였으며, 경기도 이천 소재의 P사에서 실행하였다. 유탕공정은 각각의 시간과 온도 측정에 따라 미생물학적, 화학적 위해요소를 제거하거나 감소에 대해 실험하였다. 실험결과 Standard plate count와 식중독균은 유탕공정(Temperature : $145{\pm}10^{\circ}C$, Time : $75{\pm}30$ sec)에 의해 검출되지 않았다. 유탕공정에 의해 생성되는 화학적 위해 기준의 산가는 법적 기준치인 0.6보다 낮은 0.2 이하였다. 증숙실과 유탕실의 공중낙하균을 측정한 결과 3 CFU/mL, 3 CFU/mL 검출되었다. 따라서 유탕공정의 CCP-BC는 일반세균과 식중독균, 산화생성물 생성을 예방, 제거하는데 좋은 대안책이 될 것이다. 결론적으로 HACCP을 위해 유탕공정에 대한 한계기준설정, 모니터링방법, 개선조치, 검증방법, 교육, 기록관리가 필요하다고 생각된다.
Maulana, Sena;Gumelar, Yuarsa;Fatrawana, Adesna;Maulana, Muhammad Iqbal;Hidayat, Wahyu;Sumardi, Ihak;Wistara, Nyoman Jaya;Lee, Seung Hwan;Kim, Nam Hun;Febrianto, Fauzi
Journal of the Korean Wood Science and Technology
/
제47권4호
/
pp.519-532
/
2019
The objectives of this study were to evaluate the effects of shelling ratio and resin content on the properties of bamboo oriented strand board (BOSB) from betung (Dendrocalamus asper) and to determine the correlation between the results of dynamic and static bending tests. Strands were steam-treated at $126^{\circ}C$ for 1 h under 0.14 MPa pressure and followed by washing with 1% NaOH solution. Three-layer BOSB with the core layer perpendicular to the surface was formed with shelling ratios (face:core ratio) of 30:70; 40:60; 50:50; 60:40 and binded with 7% and 8% of phenol formaldehyde (PF) resin with the addition of 1% of wax. The evaluation of physical and mechanical properties of BOSB was conducted in accordance with the JIS A 5908:2003 standard and the results were compared with CSA 0437.0 standard for commercial OSB (Grade O-1). Non-destructive testing was conducted using Metriguard Model 239A Stress Wave Timer which has a wave propagation time from 1 to $9,999{\mu}s$ and a resolution of $1{\mu}s$. BOSB with 8% resin content showed better physical and mechanical properties than those with 7% resin content. The increase of the face layer ratio improved the strength of BOSB in parallel direction to the grain. The results suggested that shelling ratio of 50:50 could be used as a simple way to reduce PF resin requirements from 8% to 7% and to meet the requirements of CSA 0437.0 standard. The results of non-destructive and destructive tests showed a strong correlation, suggesting that non-destructive test can be used to estimate the bending properties of BOSB.
대용량 화학 및 청정에너지의 운반체인 수소는 석유화학 산업 및 연료전지 등에서 많이 활용되는 중요한 산업용 기체이다. 특히 수소는 주로 증기개질 및 가스화를 통해 화석 연료에서 생성되며 부산물로 이산화탄소가 발생한다. 따라서 고순도 수소를 얻기 위해서는 이산화탄소를 제거해야 한다. 본 총설에서는 배러 단위[1 Barrer = 10-10 cm3 (STP) × cm / (cm2 × s × cmHg)]로 보고된 이산화탄소로부터 수소를 분리하는 프리스탠딩 고분자 분리막 및 혼합매질 분리막에 초점을 맞추었다. 최근 보고된 다양한 논문들을 분석하여 분리막의 구조, 형태, 상호 작용 및 제조 방법에 대해 논의하고 구조-물성 관계를 이해하여 향후 더 나은 분리막 소재를 찾는 데 도움이 되고자 한다. 다양한 분리막의 성능 및 특성 검토를 통해 수소/이산화탄소 분리에 대한 Robeson 성능 한계선을 제시하고, 가교, 혼합 및 열처리 등의 기술을 사용하여 분리 특성을 개선하는 다양한 혼합매질 분리막에 대해 논의하였다.
Nuclear accidents such as Fukushima Daiichi have highlighted the potential of passive safety systems to replace or complement active safety systems as part of the overall prevention and/or mitigation strategies. In addition, passive systems are key features of Small Modular Reactors (SMRs), for which they are becoming almost unavoidable and are part of the basic design of many reactors available in today's nuclear market. Nevertheless, their potential to significantly increase the safety of nuclear power plants still needs to be strengthened, in particular the ability of computer codes to determine their performance and reliability in industrial applications and support the safety demonstration. The PASTELS project (September 2020-February 2024), funded by the European Commission "Euratom H2020" programme, is devoted to the study of passive systems relying on natural circulation. The project focuses on two types, namely the SAfety COndenser (SACO) for the evacuation of the core residual power and the Containment Wall Condenser (CWC) for the reduction of heat and pressure in the containment vessel in case of accident. A specific design for each of these systems is being investigated in the project. Firstly, a straight vertical pool type of SACO has been implemented on the Framatome's PKL loop at Erlangen. It represents a tube bundle type heat exchanger that transfers heat from the secondary circuit to the water pool in which it is immersed by condensing the vapour generated in the steam generator. Secondly, the project relies on the CWC installed on the PASI test loop at LUT University in Finland. This facility reproduces the thermal-hydraulic behaviour of a Passive Containment Cooling System (PCCS) mainly composed of a CWC, a heat exchanger in the containment vessel connected to a water tank at atmospheric pressure outside the vessel which represents the ultimate heat sink. Several activities are carried out within the framework of the project. Different tests are conducted on these integral test facilities to produce new and relevant experimental data allowing to better characterize the physical behaviours and the performances of these systems for various thermo-hydraulic conditions. These test programmes are simulated by different codes acting at different scales, mainly system and CFD codes. New "system/CFD" coupling approaches are also considered to evaluate their potential to benefit both from the accuracy of CFD in regions where local 3D effects are dominant and system codes whose computational speed, robustness and general level of physical validation are particularly appreciated in industrial studies. In parallel, the project includes the study of single and two-phase natural circulation loops through a bibliographical study and the simulations of the PERSEO and HERO-2 experimental facilities. After a synthetic presentation of the project and its objectives, this article provides the reader with findings related to the physical analysis of the test results obtained on the PKL and PASI installations as well an overall evaluation of the capability of the different numerical tools to simulate passive systems.
생황장에 양파를 첨가하였을 때와 무장과 비지장에 표고버섯을 첨가하였을 때, 그리고 찌금장에 다시마를 첨가하였을 때 휘발성 성분을 추출하여 분석 동정하였다. 생황장은 furfural, benzeneacetaldehyde, n-hexadecanoic acid 등이 많이 검출되었고 양파 첨가구에서 1-hexanol, 2,5-dimethylthiophene은 숙성 4일 후에 각각 0.07, 0.11 ppm이 검출되었다. 생황장은 발효 4일된 시료에서 향기성분의 함량이 비교적 높게 나타났으며, n-hexadecanoic acid의 경우 발효 4일된 시료는 발효초기 함량보다 10배 이상 높게 나타났다. 무장에서의 1H-indole과 phenol은 발효초기에는 대조구에서 각각 130.02, 85.38 ppm이었고, 6일째에는 각각 129.68, 95.99 ppm이었다. 표고버섯 첨가 시 1H-indole은 각각 121.90 ppm에서 114.44 ppm으로, phenol은 각각 87.48 ppm에서 75.64 ppm으로 감소하였다. 3-Allyl-6-methoxyphenol, ${\gamma}-dodecalactone$ 등은 대조구에서 검출이 되었으며, 1,2,4-trithiolane, 2-buthyl-2-octenal은 표고버섯 첨가구에서 검출되었다. 비지장에서는 2,4-decadienal이 대조구는 발효초기에는 2.76 ppm, 발효 1일에는 6.46 ppm, 2일에는 5.02 ppm이 검출되었고 표고버섯 첨가구는 발효초기에는 2.92 ppm, 발효 1일에는 3.84 ppm, 2일에는 3.60 ppm이 검출되어 표고버섯 첨가시 함량이 감소하는 것으로 나타났다. Furfural은 증가하는 경향을 보였고, 1,2,4-trithiolane과 lenthionine은 표고버섯 첨가한 시료에서만 검출되었다. 찌금장은 tetramethylpyrazine, hexadecanal, tetradecanoic acid methyl ester, n-hexadecanoic acid, linoleic acid dthyl ester 등이 검출되었고 발효가 진행되어도 이들 성분의 변화는 적었지만, linoleic acid ethyl ester는 감소하였다. 전체적으로 부재료를 첨가하였을 경우에 장 특유의 이취로 알려진 pyrazine류나 hexadecanoic acid 등의 지방산의 함량이 감소하는 것으로 나타났다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.