• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.2
• /
• pp.131-136
• /
• 2014

In this paper, a fire resistance test was carried out in accordance with the change of the insulation conditions on the exposed side and unexposed side of a coaming to obtain the optimal insulation conditions for class H-120 insulation in connection with specimen1 of the preceding paper for an evaluation of the fireproof performance of fire dampers according to hydrocarbon fire conditions. In the test results, specimen2(88 mm, $171^{\circ}C$) met the class H-120 insulation conditions, but specimen3(76mm, $181^{\circ}C$) exceeded the thermal insulation acceptance criteria at 110 minutes. Therefore, specimen2(88 mm) represents the optimal insulation conditions as a possible lightweight materialas compared to specimen1. From a comparison of the test results, we concluded that the temperature increase of the coaming insulation surface was influenced by conductive heat from the bulkhead and that the coaming surface was influenced by radiant heat from the blade and coaming.

• Journal of Power System Engineering
• /
• v.18 no.2
• /
• pp.19-24
• /
• 2014

This research conducts CAE analysis of fire damper and design of damper controlling system. The prediction of the design heat transfer was done the answer of fire damper could be obtained by using continuity equation of damper controlling and orthogonal array. Through the design analysis of optimal offshore construction, new fire damper of H-120 class was designed. Accordingly, this equipment will be tested in actual offshore construction. Finally, we could obtain fire damper of optimal design with orthogonal array. With the CAE results of this research, The offshore plant will obtain eco-friendly fire damper with a method to select optimal condition of fire damper with orthogonal array.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.538-543
• /
• 2008

Recently a nano-scale diamond is possible to manufacture forms of powder(below 100 nm) by new processing of explosion or deposition method. Using a sintering of nano-scale diamond is possible to manufacture of grinding tools. We have need of a processing development of coated uniformly inorganic to prevent an abnormal grain growth of nano-crystal and bonding obstacle caused by sintering process. This paper, in order to improve the sintering property of nano-scale diamond, we coated ZnO thin films(thickness: $20{\sim}30\;nm$) in a vacuum by ALD(atomic layer deposition) Economically, in order to deposit ZnO all over the surface of nano-scale diamond powder, we used a new modified fluidized bed processing replaced mechanical vibration effect or fluidized bed reactor which utilized diamond floating owing to pressure of pulse(or purge) processing after inserted diamond powders in quartz tube(L: 20 mm) then closed quartz tube by porosity glass filter. We deposited ZnO thin films by ALD in closed both sides of quartz tube by porosity glass filter by ALD(precursor: DEZn($C_4H_{10}Zn$), reaction gas: $H_2O$) at $10^{\circ}C$(in canister). Processing procedure and injection time of reaction materials set up DEZn pulse-0.1 sec, DEZn purge-20 sec, $H_2O$ pulse-0.1 sec, $H_2O$ purge-40 sec and we put in operation repetitive 100 cycles(1 cycle is 4 steps) We confirmed microstructure of diamond powder and diamond powder doped ZnO thin film by TEM(transmission electron microscope) Through TEM analysis, we confirmed that diamond powder diameter was some $70{\sim}120\;nm$ and shape was tetragonal, hexagonal, etc before ALD. We confirmed that diameter of diamond powders doped ZnO thin film was some $70{\sim}120\;nm$ and uniform ZnO(thickness: $20{\sim}30\;nm$) thin film was successfully deposited on diamond powder surface according to brightness difference between diamond powder and ZnO.

• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.284-289
• /
• 2007

This study was conducted to investigate the effects of copper and zinc supplementation on growth performance, nutrient digestibility, and meat and carcass characteristics in finishing pigs. A total of 72 $(Landrace{\times}Yorkshire{\times}Duroc)$ pigs (58.47 kg initial BW) were assigned to 6 treatments in a $2{\times}3$ factorial design $(Zn\;levels{\times}Cu\;levels)$. The sources of zinc and copper were Zn-methionine chelate and Cu-methionine chelate, respectively. Zinc levels used were 80 and 120 ppm and copper levels used were 10, 30 and 60 ppm. Throughout the entire experimental period, the average daily gain (ADG) and average daily feed intake (ADFI) were not significantly affected by Cu or Zn levels, or their relative levels. The G:F ratio was significantly affected by the relative levels of Cu and Zn (p<0.05), specifically at 30 ppm Cu and 120 ppm Zn. Dry matter digestibility was significantly affected by the levels of Cu (p<0.02), Zn (p<0.01) and the relative levels of each (p<0.04), in particular at 30 ppm Cu and 120 ppm Zn. Nitrogen digestibility was significantly affected by Zn levels (p<0.01) and the combination of 30 ppm Cu and 120 ppm Zn (p<0.03). The $L^*-value$, shear force, cooking loss and pH were not significantly affected by Cu levels, Zn levels or their combination. The $a^*- (p<0.04)\;and\;b^*- values (p<0.01)$ were significantly affected by Zn levels at 80 ppm. The Water hoding capacity was significantly affected by Cu and Zn in combination (p<0.01) at 10 ppm Cu and 120ppm Zn. The carcass weight, backfat thickness and carcass grade were not significantly affected by Cu levels, Zn levels or their relative levels. The carcass percentage was significantly affected by the combination (p<0.04) of 30ppm Cu and 120ppm Zn. In conclusion, dietary supplementation of Cu and Zn at 30 and 120 ppm, respectively, is effective for feed efficiency, nutrient digestibility and carcass percentage, while at the levels of Cu at 10 ppm and Zn at 120 ppm have effects on WHC.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1801-1802
• /
• 2006

강우량계는 기상관측 장비중 비가 온 양을 측정하기 위한 장비로 전도형, 저수형, 중량형, 로드셀형 등 다양한 종류의 강우량계가 있다. 전도형 우량계의 경우 단순한 측정방법 및 유지보수의 용이성, 접점방식에 의한 신호의 디지털화 적용성이 우수하기 때문에 가장 널리 사용되고 있다. 전도형 우량계는 분해능에 따라 0.1mm, 0.2mm, 0.5mm, 그리고 1.0mm급으로 분류며, 저수지 관리를 위해 사용되고 있는 우량계는 1.0mm 급을 주로 사용하고 있으며, 보다 정밀하게 측정하기 위하여 0.5mm 급 우량계도 사용하고 있다. 이러한 전도형 우량계의 정확도를 검정하기 위한 방법으로 수자원연구원에 질량측정에 의한 검 교정을 할 수 있는 표준교정시스템이 구축되어 있으며, 이 시스템을 이용하여 0.5mm 및 1.0mm 전도형 우량계에 대하여 강우강도를 20, 40, 60, 80, 100, 120, 140, 160, 180, 200 mm/h로 가변하면서 강우강도의 변화에 따른 분해능이 다른 우량계의 오차특성을 비교 분석하고자 한다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.81-85
• /
• 2006

In this study, we have been examined nano Injection Molding process which can improve transcription of 100nm-level pattern. We changed the various parameter (temperature of injection mold, clamp force, temperature of nozzle) which can be influence for improving transcription. And we measured and analyzed shapes of 100nm-level pattern by Automic Force Microscope for proving transcription. We made the Blu-ray Disc sample for proving transcription. And we measured HF-Signal and jitter. As a result, when the temperature of mold is more than $120^{\circ}C$ and the clamp force is more than 10 ton, We reached over 95 percent of transcription compared with stamper pattern. And we reached in-spec. value for HF-Signal and Jitter. Then we reached over 95 percent of transcription compared with stamper pattern.

• Korean Journal of Poultry Science
• /
• v.35 no.4
• /
• pp.391-398
• /
• 2009

The objective of the present study was to compare of the effects of four molting methods on performance of laying hens. In total, 120 White Leghorn layers (62 weeks of age) were used. The four molting methods consisted of 10 days of feeding and the first 3 days of water withdrawal (FW1, 2) followed by ad libitum access to a layer diet 1 and 2 from day 11; 28 days of restricted feeding (NFW1); 28 days without withdrawing their feed (NFW2). Egg production of postmolt decreased until $3{\sim}4$ days at FW1 and FW2 treatments and until $16{\sim}18$ days at NFW1 and NFW2. 50% recovery of egg production were 7, 6, 7 and 5 week at FW1, FW2, NFW1, and NFW2 treatments, respectively. At day 14 of postmolt, the weight of livers, hearts, and oviducts decreased at molting treatments (P<0.05). Egg quality was improved on egg weight, eggshell thickness, eggshell break strength, and Haugh unit except egg yolk color (P<0.05).

• Korean Journal of Metals and Materials
• /
• v.46 no.11
• /
• pp.762-769
• /
• 2008

Hydrogenated amorphous silicon(a-Si : H) layers, 120 nm and 50 nm in thickness, were deposited on 200 $nm-SiO_2$/single-Si substrates by inductively coupled plasma chemical vapor deposition(ICP-CVD). Subsequently, 30 nm-Ni layers were deposited by E-beam evaporation. Finally, 30 nm-Ni/120 nm a-Si : H/200 $nm-SiO_2$/single-Si and 30 nm-Ni/50 nm a-Si:H/200 $nm-SiO_2$/single-Si were prepared. The prepared samples were annealed by rapid thermal annealing(RTA) from $200^{\circ}C$ to $500^{\circ}C$ in $50^{\circ}C$ increments for 30 minute. A four-point tester, high resolution X-ray diffraction(HRXRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and scanning probe microscopy(SPM) were used to examine the sheet resistance, phase transformation, in-plane microstructure, cross-sectional microstructure, and surface roughness, respectively. The nickel silicide on the 120 nm a-Si:H substrate showed high sheet resistance($470{\Omega}/{\Box}$) at T(temperature) < $450^{\circ}C$ and low sheet resistance ($70{\Omega}/{\Box}$) at T > $450^{\circ}C$. The high and low resistive regions contained ${\zeta}-Ni_2Si$ and NiSi, respectively. In case of microstructure showed mixed phase of nickel silicide and a-Si:H on the residual a-Si:H layer at T < $450^{\circ}C$ but no mixed phase and a residual a-Si:H layer at T > $450^{\circ}C$. The surface roughness matched the phase transformation according to the silicidation temperature. The nickel silicide on the 50 nm a-Si:H substrate had high sheet resistance(${\sim}1k{\Omega}/{\Box}$) at T < $400^{\circ}C$ and low sheet resistance ($100{\Omega}/{\Box}$) at T > $400^{\circ}C$. This was attributed to the formation of ${\delta}-Ni_2Si$ at T > $400^{\circ}C$ regardless of the siliciation temperature. An examination of the microstructure showed a region of nickel silicide at T < $400^{\circ}C$ that consisted of a mixed phase of nickel silicide and a-Si:H without a residual a-Si:H layer. The region at T > $400^{\circ}C$ showed crystalline nickel silicide without a mixed phase. The surface roughness remained constant regardless of the silicidation temperature. Our results suggest that a 50 nm a-Si:H nickel silicide layer is advantageous of the active layer of a thin film transistor(TFT) when applying a nano-thick layer with a constant sheet resistance, surface roughness, and ${\delta}-Ni_2Si$ temperatures > $400^{\circ}C$.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1168-1170
• /
• 2005

Nanoimprint Lithography(NIL) has increasingly been recognized as a key manufacturing technology for nanosized feature. One of the most important task for nanoimprint lithography is to provide the imprinting stamp with low price. The Stamp fabricated with Si based material by e-beam lithography, RIE is extremely expensive and its throughput is very limited and PDMS replica is too soft to hold high imprinting pressure.(>5atm) In this study, we present the imprinting stamp which can be easily replicated from original mold and is based on PVC film. Replication of original Si mold to PVC film was done by Hot embossing technique, ($120^{\circ}C$ of Temperature, 20 atm applied) As small as 100nm patterns were successfully transferred into PVC film. The size of stamp was up to 100mm in diameter.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.51-52
• /
• 2008

폐기되고 있는 땅콩껍질로부터 재활용이라는 로하스 개념을 적용한 천연염색 자원개발 측면에서 땅콩껍질의 색소 추출을이용하여 나일론직물의 염색성, 염색 견뢰도와 더불어 기능성을 토하고자 하였다. 볶은 땅콩(학명 Arachis hypogaea)의 외피를 분리하여 땅콩껍질 5kg에 증류수 10L을 가하여 $100^{\circ}C$에서 120분간 환류시켜 색소를 추출 여과하였다. 매염제는 시약은 1급을 그대로 사용하였다. 시료는 KS K 0905에 규정된 염색 견뢰도 시험용 정련된 표준 나일론직물 사용 하였으며 염액의 욕비 1:50, 시간에 따른 염색조건, 염색온도, pH, 반복 염색성은 $100^{\circ}C$에서 90분씩 염색하여 건조하는 순서로 6회 반복 염색하였다. 염색온도가 높아질수록 시간이 길어질 수록황색이 점차 진해지며 온도 증가함에 따라 K/S값과 ${\Delta}E$값이 점차 증가함을 보여주고 있다.