• Textile Coloration and Finishing
• /
• v.18 no.5 s.90
• /
• pp.22-29
• /
• 2006

The purpose of this study was to investigate the dyeability and antibacterial activity on wool fabric dyed with cochineal at variable dyeing conditions. Al, Cr, Fe, Cu and Sn were used as mordants and adsorption was compared with different mordanting methods. The optimum dyeing conditions of wool fabrics were dyeing concentration 2.0%(o.w.s), dyeing temperature $60^{\circ}C$, pH 3 and dyeing time 30 minutes. The pre-mordanting method was preferred for Al and Cr, and the post-mordanting one was preferred for Cu, Sn and Fe to achieve better dyeing. The optimum mordanting conditions of wool fabrics dyed with cochineal were mordanting concentration of 1%(o.w.s), mordanting temperature $60^{\circ}C$, and dyeing time 30 minutes. Wool fabrics dyed with cochineal showed a little antibacterial activity, but it was increased by Cu and Sn mordanting. The light fastness and perspiration fastness of wool fabric treated with cochineal were improved by mordanting.

• Journal of Sericultural and Entomological Science
• /
• v.31 no.1
• /
• pp.45-54
• /
• 1989

본 연구에서는 견에 대한 산성염료의 염착기구를 규명하기 위하여 전하수가 다른 산성염료에 의한 흡착실험을 수행하여, 견섬유와 피브로인막의 구조와 염료의 구조를 관련시켜서 산성염료의 흡착거동에 관한 해석을 하였다. 산성염료에 sulfonic acid group이 도입됨에 따라서 partition coefficient(Kp)는 감소하였지만 Langmuir type sorption constant(KL)는 증가하였고, 염욕의 pH와 온도의 증가에 따라서도 Kp, KL 값은 증가하였다. 전하수가 1, 2인 Dye I과 Dye II는 견섬유와 피브로인 막에 대하여 stoichiometric adsorption이 잘 적용될 수 있었으나 전하수가 3인 Dye III는 잘 적용되지 않았다. sulfonic acid group이 산성염료에 도입됨에 따라 각각의 sulfonic acid group의 표준친화력은 감소하였고, 모든 엔탈피 값은 음(-)으로 나타난 반면에 엔트로피 값은 양(+)으로 나타났다. 견섬유와 피브로인 막의 흡착 constant를 비교한 결과, 견 피브로인에 대한 산성염료의 흡착거동은 견 피브로인의 구조에 영향을 받는다는 것을 알 수 있다.

• Journal of Sensor Science and Technology
• /
• v.17 no.4
• /
• pp.303-307
• /
• 2008

$NiO,\;Cu_2O,\;Mn_2O_3$ and $Cr_2O_3$ as p-type semiconductors were added in CoO with 15 wt.% ethylene glycol binder and measured the butane gas sensing characteristics. The highest sensitivity is obtained for the NiO-CoO sensors. CoO-20 at.% NiO sensor with 15 wt.% ethylene glycol binder sintered at $1100^{\circ}C$ for 24 h exhibits high sensitivity of 90 % to 5000 ppm butane gas at the sensor temperature of $250^{\circ}C$, compared to low sensitivities at the low operating temperature for commercial sensors. Response and recovery times are, respectively, within few seconds and 1min in the static flow system, indicating rapid adsorption and desorption of butane gas on sensor surface even at this low temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.02a
• /
• pp.58-58
• /
• 2005

• Journal of Microbiology and Biotechnology
• /
• v.10 no.4
• /
• pp.539-543
• /
• 2000

A new bacteriocin, named lacticin 10790, was purified from Lactococcus lactis subsp. cremoris KFCC 10790 by sequential adsorption, immobilized metal-affinity, cation-exchange, and $C_{18}$ reverse-phase chromatographies. The molecular mass of the bacteriocin was estimated to be between 3,000 and 3,500 Da. Lacticin 10790 showed a broad antimicrobial spectrum against many gram-positive bacteria. The bacteriocin was stable to heat and in the pH range between 2 and 6. Lacticin 10790 was destroyed by digestion with proteases and exhibited a bactericidal mode of action. An amino acid composition analysis of purified lacticin 10790 revealed a high concentration of hydrophobic amino acids. The N terminus of the bacteriocin was found to be blocked, upon analysis by Edman degradation. The results suggest that lacticin 10790 is a class I bacteriocin.

• Microbiology and Biotechnology Letters
• /
• v.17 no.5
• /
• pp.529-532
• /
• 1989

A strain of Streptomyces sp. (YS-221-B) extracellularly produced an inhibitory substance for $\alpha$-D-Glucosidase. The substance was purified 96-fold from culture filtrate by dialysis, heat treatment, adsorption on active carbon, Bio-Gel P-10 and Sephadex G-75 column chromatography with yield of 9.2%. The substance was stable in pH range from 7.0 to 11.0 at 37$^{\circ}C$, and a treatment at 10$0^{\circ}C$ for 20 min diminished only 15% of the original activity. The inhibitor was not inactivated by the treatment of $\alpha$-, $\beta$-amylases, glucoamylases, trypsin and chymotrypsin but inactivated by pyoteases from Streptomyces griseus and Tritirachium album.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.8
• /
• pp.1240-1242
• /
• 2010

We attempted to identify the compound responsible for the growth inhibition of Microcystis aeruginosa occurring when a culture broth of Bacillus subtilis C1 was added to the medium. The active compound was purified from B. subtilis C1 culture broth by adsorption chromatography and HPLC, and was identified as a type of glycolipid based on $^1H$ NMR and MS analyses. The purified active compound completely inhibited the growth of M. aeruginosa at a concentration of 10 ${\mu}g/ml$. This is the first report of a glycolipid produced by a Bacillus strain that has potential as an agent for the selective control of bloom-forming M. aeruginosa.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.6
• /
• pp.678-682
• /
• 1998

A strain of Streptomyces sp. SK-862, isolated from soil in Wonju city, was able to prodce a biologically active substance that has a strong inhibitory activity against proteolsis by trypsin. The inhyibitory substance was extracted by n-butanol, and then purified by the adsorption chromatography followed by the reverse-phase high performacne liquid chromatography. The purified substance was stable over the pH range from 2 to 10, but was unstable when treated at 8$0^{\circ}C$ for 60 min. This substance was soluble in water, methanol, ethanol nd butanol, but insoluble in chlorofrom and ethylacetate. The Rf value of the purified substance on the thin layer chromatography were 0.56 in n-butanol : methanol : water(5 : 3 : 1v/v) solvent system compare dto 0.23 in ethanol : ammonium hydoxide : water(8 : 1 : 1v/v) solvent system. This substance has maximum absorption at 259 nm. The chemical reaction of the substance was negative for sugar but positive for ninhydrine and iodine reaction.

• Microbiology and Biotechnology Letters
• /
• v.23 no.2
• /
• pp.187-196
• /
• 1995

In order to produce fuctional chitooligosaccharides, a strain excreting mainly endo-type chitinase suitable for chitooligosaccharides production was newly screened and identified as Aspergillus fumigatus JC-19. The chitinase excretion was repressed in nutrient rich medium but stimulated by colloidal chitin indicating that the chitinase is inducible type enzyme. Maximum secretion of the enzyme was observed at pH 7.0 and 37$\circ$C . The growth and chitinase production patterns of Aspergillus fumigatus JC-19 showed that the cell growth reached maximum after 4-5 days with final chitinase concentration of 0.46 unit per ml. Excreted chitinase was purified by ammonium sulfate precipitation, colloidal chitin adsorption, anion exchange chromatography, and gel filtration, respectively, and measured M.W of 50 KDa. The enzyme reaction carried out both by crude and purified chitinase showed that the purified chitinase accumulated more chitooligosaccharides of 1-6 degree of polymerization than that of crude chitinase.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.184-184
• /
• 2006

We have succeeded in the preparation of high molecular weight polybenzimidazoles by solution polycondensation of 3,3'-diaminobenzidine tetrahydrochloride with isophthalic acid, terephthalic acid, or with their derivatives using polyphosphoric acid both as solvent and as condensing agent. Also, we modified phosphoric acid into fluoroalkyl-phosphonic acids[F-PA]. The main reasons are as follows, first of all F-PAs are stronger acids than PA and alkylphosphonic acids which should promote proton hopping and transport. In addition, F-PA has weaker adsorption onto Pt which help to prevent electrocatalyst poisoning and promote higher oxygen reduction activity. The ionic conductivity of 85%-H3PO4 doped membranes show $10^{-2}\;Scm^{-1}\;to\;3{\times}10^{-2}\;Scm^{-1}\;at\;150^{\circ}C$ MEA with 2 %-added electrolyte shows slightly higher cell voltage than the others.