• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.1
• /
• pp.10-18
• /
• 2011

Ergonomic product design considering users' natural use motion is of importance to improve the usability and satisfaction of a product. A five-step process of product design was developed in the present study by measuring and analyzing users' natural product-use motion with a motion capture system. The developed process was applied to ergonomic design improvement of a half guard installation part of refrigerator; new guard designs (diagonal and arc shape) were developed with the process and evaluated in terms of validity during the development as two measures (task satisfaction and similarity of natural motion). According to the evaluation result, the satisfaction at putting in- and out-task of new guard designs ($6.3{\pm}0.5$ points) was significantly higher than that of existing guard designs ($3.3{\pm}1.0$ points); the difference between natural motion and product-use motion in new guard designs ($1.0{\pm}0.3cm$) was significantly less than that of existing guard designs ($2.0{\pm}0.2cm$). The proposed process of natural motion analysis and product design is applicable to ergonomic product design and evaluation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.10
• /
• pp.877-882
• /
• 2005

In order to fabricate a high breakdown SiC-SBD (Schottky barrier diode), we investigate an effect on metal guard ring (MGR) in breakdown characteristics of the SiC-SBD. The breakdown characteristics of MGR-type SiC-SBD is significantly dependent on both the guard ring metal and the alloying time of guard ring metal. The breakdown characteristics of MGR-type SiC-SBDs are essentially improved as the alloying time of guard ring metal is increased. The SiC-SBD without MGR shows less than 200 V breakdown voltage, while the SiC-SBD with Al MGR shows approximately 700 V breakdown voltage. The improvement in breakdown characteristics is attributed to the field edge termination effect by the MGR, which is similar to an implanted guard ring-type SiC-SBD. There are two breakdown origins in the MGR-type SiC-SBD. One is due to a crystal defects, such as micropipes and stacking faults, in the Epi-layers and the SiC substrate, and occurs at a lower electric field. The other is due to the destruction of guard ring metal, which occurs at a higher electric field. The demolition of guard ring metal is due to the electric field concentration at an edge of Schottky contact metal.

• Korean Security Journal
• /
• no.8
• /
• pp.281-308
• /
• 2004

With regard to problems related to qualification of Private Security, this study is qualitatively to develop education & training program from the viewpoint of education for the purpose of checking professionalism of Security guard. Offering the solutions for improvement by analyzing problems of articles related to training for Private Security guard prescribed in existing 'Law of Guarding', I made studies of development of practical affairs-centered education & training program for Private Security guard on the basis of Private Security guard' duties. Education & training program for Private Security guard must be made up of practical affairs-centered one related to concrete duties. Also because it needs to be made on the basis of a model planned for the program with combined method, this study gave example of model and contests of education & training program based on duties of Facilities Security. Main duties of cPrivate Security guard can be divided into four duties; duties on their own posts, patrolling, control of going in and out, dealing with accidents and so on. Private Security guard are given main duties by each post, and after adjusting conditions according to personnel organization, they perform their own duties. As education & training program based on Private Security guard' duties, common education & training program for the new-appointed, practical affairs-centered education & training program, education & training program for superintendents, service education & training program and so on are provided.

• Journal of Fashion Business
• /
• v.20 no.3
• /
• pp.17-29
• /
• 2016

To develop baseball catcher leg guards, 3-dimensional (3D) methodologies, which are 3D human body data, reverse engineering, modeling, and printing, optimized guard design for representative positions. Optimization was based on analysis of 3D body surface data and subjective evaluation using 3D printing products. Reverse engineering was used for analysis and modeling based on data in three postures: standing, $90^{\circ}$ knee flexion, and $120^{\circ}$ knee flexion. During knee flexion, vertical skin length increased, with the thigh and knee larger in anterior area compared to the horizontal dimension. Moreover, $120^{\circ}$ knee flexion posture had a high radius of curvature in knee movement. Therefore, guard designs were based on increasing rates of skin deformation and numerical values of radius of curvature. Guards were designed with 3-part zoning at the thigh, knee, and shin. Guards 1 and 2 had thigh and knee boundaries allowing vertical skin length deformation because the shape of thigh and knee significantly affects to its performance. Guard 2 was designed with a narrower thigh and wider knee area than guard 1. The guards were manufactured as full-scale products on a 3D printer. Both guards fit better in sitting than standing position, and guard 2 received better evaluations than guard 1. Additional modifications were made and an optimized version (guard 3) was tested. Guard 3 showed the best fit. A design approach based on 3D data effectively determines best fitting leg guards, and 3D printing technology can customize guard design through immediate feedback from a customer.

• The Journal of Information Systems
• /
• v.19 no.4
• /
• pp.183-206
• /
• 2010

The technology acceptance model (TAM) is a lot of cited in information technology adoption and usage researches. But TAM has been conducted primarily in volitional environments of the adoption of new technology. This paper discusses technology acceptance in accounting information systems to examine TAM with Characteristics of Organizations and Individuals in mandated using Combined Guard System. Combined Guard System is a scientific guard system that is composed of automated surveillance system, automated sensing system and control system. GOP Scientific Guard System is operated by GOP unit in Korean Army O Division from 2006. In this study, using the extended technology acceptance model, we have analyzed factors which affect the usage intention of GOP Scientific Guard System in mandated using environment. Based upon previous researches, we have selected Support of management unit, Training, Perceived Risk, Subjective Knowledge and Computer Self-efficacy, perceived usefulness, perceived ease of use, and usage intention as variables and proposed a research model. We collected 253 survey questionnaires from Korean army officer and soldier who are serviced at GOP unit in O Division, and analyzed the data using SPSS 12.0 and SmartPLS 2.0M3. According to the results by PLS analysis, According to the results by PLS analysis, Training and Subjective Knowledge did not affect Perceived usefulness, but the other hypotheses were accepted. And Perceived usefulness, and Ease of use influenced the Usage intention. The results of this study will increase Characteristics of Organizations and Individuals on GOP Scientific Guard System and eventually contribute to establishing the activation of Combined Guard System.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.925-931
• /
• 2012

The purpose of this study: firstly, investigate cognition of affiliated members about manpower distribution of the South Regional Headquarters Korea Coast Guard(SRH-KCG) and danweis. Secondly, seek ways to reasonable manpower distribution of SRH-KCG and danweis. And this study's research subjects are five coast guards(Busan coast guard, Tongyeong coast guard, Yeosu coast guard, Jeju coast guard, Seogwipo coast guard) belonged to SRH-KCG. The results of this study: firstly, 56.7% of affiliated members approved the need to organizational diagnosis. Secondly, must manpower loading in order of Busan coast guard Tongyeong coast guard Jeju coast guard. Thirdly, must manpower loading in order of maritime safety division the security division criminal investigation divition.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.6
• /
• pp.167-172
• /
• 2021

The objective of this study is to present the academic implications and developmental direction of the police assigned for special guard system through big data analysis on the objective and macroscopic viewpoint of the media. As research method, this study conducted the analysis on 'police assigned for special guard' and the analysis of related words that would visualize the keywords highly related to keyword trend and news. Also, after dividing the period into the 1990s, 2000s, and 2010s, the number of relevant articles in each period was drawn for understanding the flow. In the results of this study, the perception of media report of police assigned for special guard was about the recruitment of police assigned for special guard, and relevant events/accidents, which showed the coexistence of positive interest in the recruitment of police assigned for special guard and negative image of events/accidents related to police assigned for special guard. As a result, however, the necessity and demand for police assigned for special guard are increasing. Thus, the police assigned for special guard should be engaged in work after carefully thinking of its role in charge of ethical responsibility and safety as an axis for maintaining the national safety and social order.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.459-465
• /
• 2016

This study investigated reusability of costly guard column by ultrasonic. It also investigated various effects that affect to guard column generation by ultrasonic. When investigated 30 KHz of frequency, area of ascorbic acid is 73.0% compared to unused guard column. As a result of investigation of effect of pH, guard column by ultrasonic is effective at alkali area. As a result of investigation of solvent effect, when ethanol is used, generation rate is 81.9% as of peak area compared to the case of analysis in un used column. From the result, it indicates that regenerated guard by ultrasonic is reusable.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.40-40
• /
• 2018

• Convergence Security Journal
• /
• v.13 no.5
• /
• pp.167-176
• /
• 2013

This study was analysis that first, a problem of security guard supervisor system, second, a problem of on the job training, third, a problem of basic and refresher training for improvement of security guard supervisor system that among security guard supervisor by NVivo 10. It was suggestion what improvement about problem.