• Transactions of Materials Processing
• /
• v.28 no.1
• /
• pp.43-48
• /
• 2019

Aluminum nitride (AlN) is used by the semiconductor industry, and is a compound that is required when manufacturing high thermal conductivity. The AlN films with c-axis orientation and thermal conductivity characteristic were deposited by using the Pulsed Laser Deposition (PLD). The AlN thin films were characterized by changing the deposition conditions. In particular, we have researched the AlN thin film deposited under optimal conditions for growth atmosphere. The epitaxial AlN films were grown on sapphire ($c-Al_2O_3$) single crystals by PLD with AlN target. The AlN films were deposited at a fixed temperature of $650^{\circ}C$, while conditions of nitrogen ($N_2$) pressure were varied between 0.1 mTorr and 10 mTorr. The quality of the AlN films was found to depend strongly on the $N_2$ partial pressure that was exerted during deposition. The X-ray diffraction studies revealed that the integrated intensity of the AlN (002) peak increases as a function the corresponding Full width at half maximum (FWHM) values decreases with lowering of the nitrogen partial pressure. We found that highly c-axis orientated AlN films can be deposited at a substrate temperature of $650^{\circ}C$ and a base pressure of $2{\times}10^{-7}Torr$ in the $N_2$ partial pressure of 0.1 mTorr. Also, it is noted that as the $N_2$ partial pressure decreased, the thermal conductivity increased.

• Asian Journal of Business Environment
• /
• v.11 no.3
• /
• pp.33-43
• /
• 2021

Purpose: The purpose of the paper is to assess the greening of investment flows as well as the orientation of financial sources of effective environmental protection. Both India and Vietnam are considered to be two Asian countries that are radically affected by global climate change. Governments of the two countries have implimented numerous measures against environmental pollution through the banking and finance sector. Developing green banking operations in India and Vietnam is a new direction in the socio-economic development strategy coupled with effective environmental protection. Research design, data and methodology: The data was mainly based on Asia Development Bank Institution (ADBI) and Bank of India (BOI) from 2015 - 2018. This paper focused on comparing and evaluating the development of green banks between the two countries. Result: The banks' contribution to green growth and green economy is shown in two basic aspects: (i) the connection between organizations, and individuals, and management process for investment projects, including environmental risks; and (ii) the operation of banks has a direct impact on the environment, through the application of technology to pay documents and apply e-banking. Conclusion: Paper reflects, compares and evaluates green banking operations in India and Vietnam to provide new directions aiming to develop financial and economic system along with effective and efficient step toward climate change control. India's green banking operations, after a specific assessment, will be lessons for the Government of Vietnam during the process of socio-economic development and environmental protection.

• Composites Research
• /
• v.33 no.6
• /
• pp.415-420
• /
• 2020

The interfacial properties in carbon fiber composites, which control the overall mechanical properties of the composites, are very important. Effective interface enhancement work is conducted on the modification of the carbon fiber surface with carbon nanotubes (CNTs). Nonetheless, most surface modifications methods do have their own drawbacks such as high temperatures with a range of 600~1000℃, which should be implemented for CNT growth on carbon fibers that can cause carbon fiber damages affecting deterioration of composites properties. This study includes the use of in-situ interfacial polymerization of polyamide 610/CNT to fabricate the carbon fiber composites. The process is very fast and continuous and can disperse CNTs with random orientation in the interface resulting in enhanced interfacial properties. Scanning electron microscopy was conducted to investigate the CNT dispersion and composites morphology, and the thermal stability of the composites was analyzed via thermogravimetric analysis. In addition, fiber pull-out tests were used to assess interfacial strength between fiber and matrix.

• Korean Journal of Metals and Materials
• /
• v.47 no.4
• /
• pp.256-260
• /
• 2009

This study examined the effects of plated temperature on the surface morphology and property of an electrodeposited copper foil. The morphology, crystal structure and electric characteristics of the electrodeposited copper foil were examined by scanning electron microscopy, X-ray diffraction, and a four-point probe, respectively. The surface roughness, crystal growth orientation and resistivity could be controlled using various temperature of electrolyte. Large particles were observed on the surface of the copper layer electroplated onto the $30^{\circ}C$. However, a uniform surface, lower resistivity and high flexibility were obtained when a $50^{\circ}C$ electrolyte was used.

• Korean Journal of Metals and Materials
• /
• v.47 no.9
• /
• pp.586-590
• /
• 2009

The effects of additives on the surface morphology and physical properties of copper electrodeposited on polyimide(PI) film were investigated here. Two kinds of additives, an activator(additive A) and a leveler(additive B),were used in this study. Electrochemical experiments, in conjunction with scanning electron microscopy(SEM), X-ray diffraction(XRD) and a four-point probe, were performed to characterize the morphology and mechanical characteristics of copper electrodeposited in the presence of the additives. The surface roughness, crystal growth orientation and resistivity could be controlled using various quantities of additive B. High resistivity and lower peel strength were observed on the surface of the copper layer electroplated onto the electrolyte with no additive B. However, a uniform surface, lower resistivity and high flexibility were obtained with a combination of 20 ppm of additive A and 100 ppm of additive B.

• Textile Coloration and Finishing
• /
• v.34 no.1
• /
• pp.68-75
• /
• 2022

The breathable film refers to a high-functional film that allows gas and water vapor to pass through very fine and sophisticated pores but not liquid. In this research, the breathable film was prepared based on linear low-density polyethylene (LLDPE) and CaCO₃ particles by extrude method. The LLDPE composite film containing CaCO₃ particles had excellent mechanical properties and functionalties. The drawing is a technologically simple and excellent method for improving the mechanical properties of composite films. In this work, the effects of draw ratio on morphology, crystallinity, pore size distribution, mechanical properties, and water vapor permeability of the films were examined. The results revealed that both surface morphology and breathability were affected by the influence of chain orientation and crystal growth with increasing the draw ratio. The mechanical properties were improved with increasing the draw ratio.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.1972-1981
• /
• 2022

A typical ferritic/martensitic (F/M) steel sheet was subjected to pulsed laser surface remelting (LSR) and corrosion test in lead-bismuth eutectic (LBE) at 550 ℃. There present two modification zones with distinct microstructures in the LSRed specimen: (1) remelted zone (RZ) consisting of both bulk δ-ferrite grains and martensitic plates and (2) heat-affected zone (HAZ) below the RZ, mainly composed of martensitic plates and high-density precipitates. Martensitic transformation occurs in both the RZ and the HAZ with the Kurdjumov-Sachs and Nishiyama-Wassermann orientation relationships followed concurrently, resulting in scattered orientations and specific misorientation characteristics. Hardnesses of the RZ and the HAZ are 364 ± 7 HV and 451 ± 15 HV, respectively, considerably higher than that of the matrix (267 ± 3 HV). In oxygen-saturated and oxygen-depleted LBE, thicknesses of oxide layers developed on both the as-received and the LSRed specimens increase with prolonging corrosion time (oxide layers always thinner under the oxygen-depleted condition). The corrosion resistance of the LSRed F/M steel in oxygen-saturated LBE is improved, which can be attributed to the grain-refinement accelerated formation of dense Fe-Cr spinel. In oxygen-depleted LBE, the growth of oxide layers is very low with both types of specimens showing similar corrosion resistance.

• The Journal of Engineering Geology
• /
• v.32 no.3
• /
• pp.339-350
• /
• 2022

There are a variety of types in tafoni formed in Miocene tuff from Golgulsa, Gyeongju. Tuff bearing tafoni was quite weathered, composed of quartz, feldspars, micas, vermiculite, chlorite, smectite, and analcite. In the early stage of the tafoni development, tafoni preferentially formed from cavities where volcanic breccias were removed or from microcavities where microcrystals were chemically altered. Small tafoni grew into large one by merging each other. The orientation of tafoni is inversely arranged to slopes, with slight inclination toward the inner cavity. Height, width, and depth of tafoni are closely interrelated: the correlation coefficients are 0.839 (width-height), 0.900 (width-depth), and 0.856 (height-depth), respectively. Removal of walls between tafoni resulted in lenticular or crescent forms, and small tafoni laterally combined to large tafoni. Large tafoni is weak because of high porosity and low strength compared to normal slope. Therefore, systematic monitoring for slope strength, pore proportion and volume, and growth of cavity needs to secure the slope stability where tafoni in Golgulsa is widespread.

• Textile Coloration and Finishing
• /
• v.34 no.4
• /
• pp.284-301
• /
• 2022

The limitations of food production caused by global warming, consumption of soil fertility, and land shortage have demanded the development of alternative foods. Their market has been increasing, and in particular, there is an urgent need for an alternative meat. Among them, the non-slaughtered cell-cultured meat that can be manufactured in the laboratory, that is, cultured meat, is in the spotlight, which can solve the problem of meat consumption while including the advantages of meat. It is classified into minced cultured meat and structured one with a structure similar to that of real meat. The latter is currently facing limitations related scaffolds, cells, and the multiplicative problems, and many attempts are being made to solve them. The complex problem is related to secure texture and taste as well as structural similarity to actual meat. To solve the problems, it is necessary to lay emphasis on cells, there are fat cells and vascular cells, and the most fundamental cells, muscle cells. These are the main cells that control the texture and nutrients of meat, and unlike other cells, they grow in the form of fibers. A myofibril (also known as a muscle fibril) is a basic rod-like organelle of a muscle cell, which is a quantitatively major component of meat, and one of the tissues that maintain the appearance of the body and bones. In this review article, we focused on the growth of muscle cells into long, tubular cells known as muscle fibers using the fabricated fibrous scaffold, and reviewed not only research results for muscle tissue engineering but also various results in the related fields for the last five years.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.340-340
• /
• 2002

In an effort to develop alternative single buffer layer technology for YBa$_2$Cu$_3$O$_{7-{\delta}}$ (YBCO) coated conductors, we have investigated both LaMnO$_3$, (LMO) and La$_2$Zr$_2$O$_{7}$ (LZO) as potential buffer layers. High-quality LMO films were grown directly on textured Ni and Ni-W (3%) substrates using rf magnetron sputtering. Highly textured LZO buffers were grown on textured Ni substrates using sol-gel alkoxide processing route. YBCO films were then grown on both LMO and LZO buffers using pulsed laser deposition. Detailed X-ray studies have shown that YBCO films were grown on both LMO and LZO layers with a single epitaxial orientation. A high J$_{c}$ of over 1 MA/cm$^2$ at 77 K and self-field was obtained on YBCO films grown on both LMO-buffered Ni or Ni-W substrates, and also on LZO-buffered Ni substrates. We have identified LaMnO$_3$ as a good diffusion barrier layer for Ni and it also provides a good template for growing high current density YBCO films. Similarly we have also demonstrated the growth of high J$_{c}$ YBCO films on all solution buffers. We will discuss in detail about our buffer deposition processes. processes.s.s.s.s.