• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.48-51
• /
• 1995

We have developed the three dimensional mesh generator for three dimensional process simulation using the FEM(Finite Element Method). Tetrahedron element construct the presented three dimensional mesh, which is suitable for the simulation of three dimensional behavior of the LOCOS. The simulation of thermal oxidation is one of the problem in scale downed semiconductor processes. As three dimensional simulators use the huge size of the memory, we use the efficient method that generates the new nodes inside the growing oxide and removes the nodes nearby the SiO2/Si interface in silicon. The resented three dimensional mesh generator was designed to be used in various process simulations, for instance thermal oxidation, silicidation, nitridation, ion implantation, diffusion, and so on.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.4
• /
• pp.334-338
• /
• 2006

Poly silicon TFT requires high quality dielectric film; conventional method of growing silicon dioxide needs highly hazardous chemicals such as silane. We have grown high quality dielectric film of silicon dioxide using non-hazardous chemical such as TFOS and ozone as reaction gases by APCVD. The films grown were characterized through C-V curves of MOS structures. Conventional APCVD requires high temperature processing where as in the process of current study, we developed a low temperature process. Interface trap density was substantially decreased in the silicon surface coated with the silicon dioxide film after annealing in nitrogen ambient. The interface with such low trap density could be used for poly silicon TFT fabrication with cheaper cost and potentially less hazards.

• Membrane and Water Treatment
• /
• v.3 no.3
• /
• pp.181-200
• /
• 2012

At present water crisis is not an issue of scarcity, but of access. There is a growing recognition of the need for increased access to clean water (drinkable, agricultural, industrial use). An encouraging number of innovative technologies, systems, components, processes are emerging for water-treatment, including new filtration and disinfectant technologies, and removal of organics from water. In the past decade many methods have been developed. The most important membrane-based water technologies include reverse osmosis (RO), ultrafiltration (UF), microfiltration (MF), and nanofiltration. Beside membrane based water-treatment processes, other techniques such as advanced oxidation process (AOP) have also been developed. Some unconventional water treatment technology such as magnetic treatment is also being developed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.1
• /
• pp.41-47
• /
• 1992

In SFB Process, after 110$0^{\circ}C$ annealing in wet OS12T(95$^{\circ}C$ HS12TO bubbling) atmosphere, the existence of the interfacial oxide film in micro-gap at Si-Si bonding interface was identified. The angle lapping/staining and SEM morphologies of bonding interface showed that the growing behavior of interfacial oxide made a contribution to eliminate the micro-gaps having a width of 200-300$\AA$. In case of the diodes composed of p-n wafer pairs made by SFB processes, the annealed one in wet OS12T atmosphere exhibited a dielectric breakdown phenomena of interfacial oxide at 37-40 volts d.c.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.247-250
• /
• 2006

The growing demand for more fuel-efficient vehicles to reduce energy consumption and air pollution is a challenge for the automotive industry. The characteristic properties of aluminum, high strengrth stiffness to weight ratio, good formability, good corrosion resistence, and recycling potential make it the ideal candidate to replace heavier materials in the car to respond to the weight resuction demand within the automotive industry. In this paper, A series of compression test was carried out to find the flow stress of A6082 at 300, 400 and $500^{\circ}C$, then we tried to estimate weldability, extrusion load and effective stress of die in the aluminum extrusion process through the 3D FE simulation at non-steady state for aluminum automotive parts.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.2
• /
• pp.59-64
• /
• 2011

Wind turbine blades will be required to be longer, lighter, more reliable and more consistent. Therefore it is necessary to lose weight of the wind turbine blades. This points squarely toward prepreg blade production growing. It is important to note however that prepreg blade production as it is today is flawed and that there are ways to improve greatly on the performance of these blades in manufacturing process and in their in-service performance. Through this, we have some detail on the current process and its advantage of cost and weight of blades.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.6
• /
• pp.471-481
• /
• 2005

Heavy crudes (bitumen) are extremely viscous and contain high concentrations of asphaltene, resins, nitrogen and sulfur containing heteroaromatics and several metals, particularly nickel and vanadium. These properties of heavy crude oil present serious operational problems in heavy oil production and downstream processing. There are vast deposits of heavy crude oils in many parts of the world. In fact, these reserves are estimated at more than seven times the known remaining reserves of conventional crude oils. It has been proven that reserves of conventional crude oil are being depleted, thus there is a growing interest in the utilization of these vast resources of unconventional oils to produce refined fuels and petrochemicals by upgrading. Presently, the methods used for reducing viscosity and upgradation is cost intensive, less selective and environmentally reactive. Biological processing of heavy crudes may provide an ecofriendly alternative or complementary process with less severe process conditions and higher selectivity to specific reactions to upgrade heavy crude oil. This review describes the prospects and strengths of biological processes for upgrading of heavy crude oil.

• The Journal of Information Technology and Database
• /
• v.8 no.1
• /
• pp.67-80
• /
• 2001

Information Systems (IS) auditing has been know to be helpful in developing optimal IS and managing information resources successfully. The public sector of Korea has witnessed the rapidly growing demand for IS auditing. However, there is a dearth of research that evaluate the effects of IS auditing. This study assesses the impacts of IS auditing based on a process perspective. In order to evaluate the effects objectively and properly, the current study collected empirical data from 58 firms. This stuuy confirmed that IS auditing was a very effective tool for successful IS implementation. The results show that IS auditing improves “project management”, “support”, and “engineering” practices while it does not make any impact on “contract” practice. In general, IS auditing has a tremendous impact on facilitating organization’quality improvement efforts.

• Journal of Information Technology Applications and Management
• /
• v.9 no.3
• /
• pp.1-12
• /
• 2002

Due to the fast development in computer and communication technologies, a video is now being more widely used than ever in many areas. The current information analyzing systems are originally built to process text-based data. Thus, it has little bits problems when it needs to correctly represent the ambiguity of a video, when it has to process a large amount of comments, or when it lacks the objectivity that the jobs require. We would like to purpose an algorithm that is capable of analyze a large amount of video efficiently. In a video, divided areas use a region growing and region merging techniques. To sample the color, we translate the color from RGB to HSI and use the information that matches with the representative colors. To sample the shape information, we use improved moment invariants(IMI) so that we can solve many problems of histogram intersection caused by current IMI and Jain. Sampled information on characteristics of the streaming media will be used to find similar frames.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.104-108
• /
• 2000

Drilling Jig is the device according to industrial demand for multi manufacturing products on the growing at alarming rate. In the field of design and making for machine tool working, welding, assembling with jig and fixture for mass production is a specific division. In order to prevent the production defects the optimum design of product, fig and fixture putting in the field is very significant manufacturing method. They require analysis of many kinds of important factors, theory and practice of machine tool operating process and its phenomena, jig & fixture structure, machining condition for tool making tool materials, heat treatment of jig & fixture components, know-how and so on. In this study we designed and constructed a drilling jig of mass production and performed tryout under the Auto CAD, database, and window environment. Especially Part1 of this study is reveals with the analysis of part drawing, jig planning, jig design etc.