The KSFM Journal of Fluid Machinery (한국유체기계학회 논문집)

Korean Society for Fluid machinery (한국유체기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Development and Analysis for Wind Turbine Blades Using Composites Materials

경량화 복합재를 이용한 풍력 블레이드 개발과 해석에 관한 연구

  • 강병윤 ((주)도하인더스트리 기술연구소) ;
  • 한정영 (부산대학교 기계설계전산화인력양성센터) ;
  • 홍철현 (부산대학교 기계설계전산화인력양성센터) ;
  • 문병영 (군산대학교 조선공학과)
  • Received : 2010.11.25
  • Accepted : 2011.02.14
  • Published : 2011.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

Wind turbine blades will be required to be longer, lighter, more reliable and more consistent. Therefore it is necessary to lose weight of the wind turbine blades. This points squarely toward prepreg blade production growing. It is important to note however that prepreg blade production as it is today is flawed and that there are ways to improve greatly on the performance of these blades in manufacturing process and in their in-service performance. Through this, we have some detail on the current process and its advantage of cost and weight of blades.

Keywords

References

  1. 김윤해, 배창원, 1999, “복합재료를 이용한 조선기자재의 개발,” 기계저널, 제39권, 제2호, pp. 54-59.
  2. 김태욱, 홍성혁, 1999, “항공기용 복합재료,” 기계저널, 제39권, 제2호, pp. 37-42.
  3. 지식경제부, 2008, “차세대 블레이드 개발,” 기획보고서.
  4. Boeing Material Specification, 2002, “Advanced Composites-350F Cure Toughened-Epoxy Preimpregnated Carbon Fiber Tapes and Fabrics,” BMS 8-276G.
  5. Boeing Material Specification, 2009, “Carbon Fiber Reinforcements, Yarn and Fabrics,” BMS 9-8J, 2004.
  6. 강병윤, 손창석 외, 2009, “BMS 인증기준에 따른 구조용 CFRP 개발,” 한국해양공학회지, 제23권, 제2호, pp. 92-97.
  7. Blade Dynamics, 2008, “Prepreg Blade Market Report”.