• 제목/요약/키워드: Ground types

검색결과 1,406건 처리시간 0.025초

한국 고대 능직물의 유형과 특성 - 석가탑 복장 능직물을 중심으로 - (Types and Characteristics of Twill Damask Fabrics of Ancient Korea - Focused on Twill Damask Fabrics found at Sukga Pagoda -)

  • 장현주;권영숙;원희정
    • 복식
    • /
    • 제56권9호
    • /
    • pp.37-49
    • /
    • 2006
  • The purpose of this study is to figure out the types and characteristics of the twill damask fabrics through literatures review of both domestic and Chinese documents and records. In addition, the study aims to review the characteristics of the twill damask fabrics found at Sukga Pagoda. The twill damask fabrics can be categorized in terms of the weaving method into Float Pattern on a Tabby Ground, Twill Pattern on a Tabby Ground, Float Pattern on a Twill Ground, Twill Pattern on a Twill Ground, and Without Pattern on a Twill Ground. The fabrics ran also be divided in terms of their name into Ki, Neung, and Munju. Four items of twill damask fabrics were found inside the Sukga Pagoda. All of them are Twill Pattern on a Twill Ground. At the primitive level of weaving skill, twill damask fabric was made by adding patterns with twill damask or BuJik on the background of plain weave. At more advanced level, the fabrics are weaved by making patterns with twill damask or BuJik on the background of twill damask. Compared to the relics of Koryo and Chosun Dynasty, these twill damask fabrics were loosely weaved with relatively thick thread.

지하굴착에 따른 붕괴유형에 대한 고찰 (Consideration of Failure Type on the Ground Excavation)

  • 이중재;정경식;이창노
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.660-670
    • /
    • 2009
  • Neighboring construction becomes mainstream of Ground excavation in downtown area. This causes the displacement, deformation, stress condition, etc of the ground surroundings. Therefore Neighboring construction have an effect on Neighboring structure. All these years a lot of Neighboring construction carried out, and the accumulation of technology also get accomplished. But earth retaining structure collapse happens yet. Types of earth retaining structure collapse are 12. 1. Failure of anchor or strut system, 2. Insufficiency of penetration, 3. H-pile Failure on excessive bending moment, 4. Slope sliding failure, 5. Excessive settlement of the back, 6. Deflection of H-pile, 7. Joint failure of coupled H-pile, 8. Rock failure when H-pile penetration is rock mass, 9. Plane arrangement of support systems are mechanically weak, 10. Boiling, 11. Heaving, 12. Over excavation. But field collapses are difficult for classification according to the type, because collapse process are complex with various types. When we consider the 12 collapse field, insufficient recognition of ground condition is 4 case. Thorough construction management prevents from fault construction. For limitations of soil survey, It is difficult to estimate ground condition exactly. Therefore, it should estimate the safety of earth retaining system, plan for necessary reinforcement, according to measurement and observation continuously.

  • PDF

저층트롤의 발줄 및 저질의 종류에 따른 저항특성 (Drag Characteristics According to Ground Rope and Seabeds in the Bottom Trawl)

  • 신정욱;이주희;권병국
    • 수산해양기술연구
    • /
    • 제38권1호
    • /
    • pp.58-68
    • /
    • 2002
  • 본 연구에서는 동해구트롤선(750ps)을 대상으로 현용어구에 대한 모형망을 제작하여 발줄과 저질의 종류에 따른 어구의 저항특성을 구하고자하여, 수중무게 5.4g인 체인형, 와이어형, 기본형의 발줄 3종류의 발줄에 대하여 실제 예망속도인 2.0~2.5knots의 범위에 해당되는 실험예망속도 0.4m/s일 때의 저항을 실험.분석하였으며, 나아가 체인형 발줄에 대해서는 발줄무게에 따른 저항의 변화를, 와이어형 발줄에 대해서는 발줄의 굵기에 따른 저항의 변화를 실험 .분석하였다. 한편, 예망속도에 따른 발줄의 종류별 저항특성을 구하고자 수중무게가 5.4g인 체인형, 와이어형, 기본형의 3종류의 발줄에 대하여 예망속도를 0.1m/s 0.2m/s 0.3m/s 0.4m/s 변화시키면서 저항을 측정하고, 어구에 대한 발줄 저항비 및 저항계수를 각각 구하였다. 그 결과를 요약하면 다음과 같다. 1. 어구저항은 저질이 모래와 펄 모두에서 체인형이 가장 크고, 기본형, 와이어형 순으로 작게 나타났다. 2. 저질의 종류에 따른 저항은 모래에서는 체인형이 가장 크고, 와이어형, 기본형 발줄의 순으로 작았으며, 필에서는 체인형이 가장 크고, 기본형, 와이어형순으로 작게 나타났다. 3. 발줄의 무게에 따른 저항은 거의 직선형으로 증가하고 있으며 저질이 펄인 경우, 체인형 발줄의 무게가 5.4g 10g 20g 일 때 저항은 각각 36g 45g 65g으로 줄의 무게가 20g일 때가 10g일 때 보다 약 44% 더 컸으며, 모래의 경우에는 각각 38g 51g 74g으로 발줄의 무게가 20g일 때가 109일 때보다 약 45%로 컸다. 4.발줄의 굵기에 따른 저항은 예망 속도가 0.4m/s에서 와이어형의 굵기가 ø 65mm 기준으로 2, 3, 4, 5배로 증가함에 따라 저항은 23g, 25g, 32g, 42g으로 각각 증가하였다. 5. 예망속도의 증가에 따른 발줄의 종류별 저항은 직선에 가까운 지수 함수적으로 증가하였고, 저질이 펄인 경우, 체인형이 가장 크며 다음으로 기본형, 와이어형 순으로 작게 나타났다. 6. 어구저항에 대한 발줄 저항의 비는 필에서 체 인형이 가장 크고, 기본형, 와이어형 순으로 나타났으며, 모래에서는 체인형이 가장 높았고, 와이어형, 기본형의 순으로 작게 나타났다. 7. 저항계수는 펄에서는 체인형 발줄이 약 10.0~55.7, 와이어형은 약 3.0~l6.0, 기본형은 약 1.5~8.5이며, 모래에서는 체인형 발줄이 약 10.0~60.0, 와이어형은 약 3.0~l4.0, 기본형은 약 1.2~6.0이었다. 그리고, 전체적으로 절과 모래 모두에서 저항계수가 체인형이 다른 두 종류의 발줄에 비해 상대적으로 가장 크고, 와이어형, 기본형의 순으로 작게 나타났다.

배전계통에서 봉형접지극의 접지저항 향상을 위한 접지저항저감제 사용방법에 관한 연구 (A Study on the Application Methods of Chemicals for Reducing Grounding Resistance of the Bar-Shaped Electrode on the Power Distribution System)

  • 박중신;나채동
    • 조명전기설비학회논문지
    • /
    • 제24권1호
    • /
    • pp.136-144
    • /
    • 2010
  • 봉형접지극은 우리나라 배전계통에 가장 많이 사용하고 있는 접지전극이다. 현재 배전계통에 사용하고 있는 봉형접지극은 접지동봉, 심타용접지봉 그리고 도전성콘크리트접지봉 등이 주로 사용되고 있다. 그러나 접지저항값은 토질에 따라 소정의 접지저항값을 얻기가 어려울 때가 많아 접지저항저감제를 사용하게 된다. 본 연구에서는 봉형접지지전극 중 가장 많이 사용하고 있는 접지동봉에 물을 제공하였을 때 얻어진 접지저항값을 기준으로 접지저항저감제의 사용방법(시공법), 접지저항저감제의 종류 등에 따라 얻어진 초기접지저항값, 시간경과(1년)에 따른 저항값의 변화폭 추이 등을 비교 검토한 연구이다. 본 연구 결과를 요약하면 신공법으로 접지저항저감제를 사용하였을 때 낮은 초기접지저항저감을 얻는 효과뿐만 아니라 시간경과에 따른 접지저항값의 변화폭도 적어 안정됨을 확인할 수 있었다.

매립토층에서 CGS에 의한 지반개량특성에 관한 연구 (Characteristics of Ground Improvement by Compaction Grouting System in Filled Ground)

  • 천병식;여유현;정영교;정완균;정의원;김우종
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.425-432
    • /
    • 2001
  • Compaction Grouting System, the method which makes ground compact by injection of low slump mortar, Is widely used for reinforcement of soft ground, restoration of structures happened differential settlement, underpinning and restoration of damaged dam core. The quantitive analysis of ground improvement for this method has not performed yet. So, design parameters about thls method must be studied through performance of CGS in various types of soil to make CGS adaptable widely. In this study PBT, SPT and field density test were performed for analysis of the characteristics of ground improvement and pressuremeter and inclinometer were installed for analysis of the characteristics of compaction in adjacent ground. In this paper, denoted much effects for filled ground that increasing of the bearing capacity, confirming the displacement of adjacent ground and the effective radius of injection.

  • PDF

수도두간변이계통의 형태 및 규산함량에 관한 연구 (Morphological Observation and Silicate Content of Short Culm Mutants in Rice)

  • 한창열
    • Journal of Plant Biology
    • /
    • 제14권3호
    • /
    • pp.29-35
    • /
    • 1971
  • Various types of short culm rice mutants were obtained by means of gamma-ray irradiation. In the present paper morphological observation and analysis of silicate content of the mutants are reported. 1. Short culm type had more useful characters than bushy and dwarf types. 2. In short culm and bushy types the number of nodes both above and under ground was similar to the mother varieties, while in dwarf type it decreased. 3. In short culm types the variation of length of above-ground culm and internodes tended to vary relattive to the mother varieties. 4. Positive correlation was found between culm length and the first and fourth internode length in short culm type. 5. Silicate content increased in short culm type-the increment being variety specific.

  • PDF

Seismic resilience evaluation of RC-MRFs equipped with passive damping devices

  • Kamaludin, Puteri Nihal Che;Kassem, Moustafa Moufid;Farsangi, Ehsan Noroozinejad;Nazri, Fadzli Mohamed;Yamaguchi, Eiki
    • Earthquakes and Structures
    • /
    • 제18권3호
    • /
    • pp.391-405
    • /
    • 2020
  • The use of passive energy dissipation devices has been widely used in the construction industry to minimize the probability of damage occurred under intense ground motion. In this study, collapse margin ratio (CMR) and fragility curves are the main parameters in the assessment to characterize the collapse safety of the structures. The assessment is done on three types of RC frame structures, incorporating three types of dampers, viscoelastic, friction, and BRB dampers. The Incremental dynamic analyses (IDA) were performed by simulating an array of 20 strong ground motion (SGM) records considering both far-field and near-field seismic scenarios that were followed by fragility curves. With respect to far-field ground motion records, the CMR values of the selected frames indicate to be higher and reachable to safety margin more than those under near-field ground motion records that introduce a high devastating impact on the structures compared to far-field excitations. This implies that the near field impact affects the ground movements at the site by attenuation the direction and causing high-frequency filtration. Besides that, the results show that the viscoelastic damper gives better performance for the structures in terms of reducing the damages compared to the other energy dissipation devices during earthquakes.

The Effects of Shoe Type on Ground Reaction Force

  • Yi, Kyung-Ok
    • 한국운동역학회지
    • /
    • 제21권1호
    • /
    • pp.9-16
    • /
    • 2011
  • The purpose of this study is to analyze the effects of both various shoe types and bare feet on ground reaction force while walking. Ten first-year female university students were selected. A force platform(Kistler, Germany) was used to measure ground reaction force. Six types of shoe were tested: flip flops, canvas shoes, running shoes, elevated forefoot walking shoes, elevated midfoot walking shoes, and five-toed shoes. The control group was barefooted. Only vertical passive/active ground reaction force variables were analyzed. The statistical analysis was carried out using the SAS 9.1.2 package, specifically ANOVA, and Tukey for the post hoc. The five-toed shoe had the highest maximum passive force value; while the running shoe had the lowest. The first active loading rate for running shoes was the highest; meanwhile, bare feet, the five-toed shoe, and the elevated fore foot walking shoe was the lowest. Although barefoot movement or movement in five toed shoes increases impact, it also allows for full movement of the foot. This in turn allows the foot arch to work properly, fully flexing along three arches(transverse, lateral, medial), facilitating braking force and initiating forward movement as the tendons, ligaments, and muscles of the arch flex back into shape. In contrast movement in padded shoes have a tendency to pound their feet into the ground. This pounding action can result in greater foot instability, which would account for the higher loading rates for the first active peak for padded shoes.

광양만 바다 준설 매립지 느티나무의 식재 지반별 토양 이화학적 특성 (The Physico-chemical Properties of the Soil at the Grounds of Replanted Zelkova serrata (Thunberg) Markino in Reclaimed Land from the Sea, Gwangyang Bay)

  • 김도균;박종민
    • 한국조경학회지
    • /
    • 제31권6호
    • /
    • pp.85-94
    • /
    • 2004
  • This study was carried out to analyze physicochemical properties according to the soil height and to the six types of sites that were used as planting ground in the reclaimed land from the sea, Gwangyang Bay. The physicochemical properties of the soil types were tested by t-test(p<0.01, 0.05), at each of the 6 planting ground sites(p<0.01, 0.05), and at each height(p<0.01) of the planting grounds. These areas were tested by ANOVA and were significantly different. Improved soil was better than reclaimed soil from the sea for Zelkova growth because the improved soil contained lower amounts of pH, ECe, N $a^{+}$, $Ca^{++}$, $Mg^{++}$ SAR. Due to freedom from variables such as salt content in the underground as well as the physical and chemical disturbance of the soil, favorable planting ground for tree growth was recorded at the higher grounds than at the lower ones. Soil detriment to the tree growth in the studied sites included elements such as soil hardness, and the distribution of sodium in the tree root systems. The planting grounds for the favorable growth of landscape trees were determined in the following order: the grounds of mounding> the coved ground of improved soil, and the filled ground of improved soil.l.l.l.

Control of Asymmetric Cell Divisions during Root Ground Tissue Maturation

  • Choi, Ji Won;Lim, Jun
    • Molecules and Cells
    • /
    • 제39권7호
    • /
    • pp.524-529
    • /
    • 2016
  • Controlling the production of diverse cell/tissue types is essential for the development of multicellular organisms such as animals and plants. The Arabidopsis thaliana root, which contains distinct cells/tissues along longitudinal and radial axes, has served as an elegant model to investigate how genetic programs and environmental signals interact to produce different cell/tissue types. In the root, a series of asymmetric cell divisions (ACDs) give rise to three ground tissue layers at maturity (endodermis, middle cortex, and cortex). Because the middle cortex is formed by a periclinal (parallel to the axis) ACD of the endodermis around 7 to 14 days post-germination, middle cortex formation is used as a parameter to assess maturation of the root ground tissue. Molecular, genetic, and physiological studies have revealed that the control of the timing and extent of middle cortex formation during root maturation relies on the interaction of plant hormones and transcription factors. In particular, abscisic acid and gibberellin act synergistically to regulate the timing and extent of middle cortex formation, unlike their typical antagonism. The SHORT-ROOT, SCARECROW, SCARECROW-LIKE 3, and DELLA transcription factors, all of which belong to the plant-specific GRAS family, play key roles in the regulation of middle cortex formation. Recently, two additional transcription factors, SEUSS and GA- AND ABA-RESPONSIVE ZINC FINGER, have also been characterized during ground tissue maturation. In this review, we provide a detailed account of the regulatory networks that control the timing and extent of middle cortex formation during post-embryonic root development.