• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1169-1175
• /
• 2011

The soil chemical properties, microbial community structures and biochemical properties of lettuce or cucumber-cultivated greenhouse soil samples were analyzed to assess soil health and characterize microbial distribution in 8 locations in Korea. Although most of chemical properties were within the soil management guidelines, the available phosphate, and the contents of exchangeable potassium and calcium were higher than those of recommended levels. In the culture-dependent analysis, 841 bacterial strains were isolated from the greenhouse soils and were identified at the genus level by 16S rRNA gene sequences analysis. The dominant bacterial genera were Bacillus (35.7%), Microbacterium (9.3%), Arthrobacter (5.7%) and Lysobacter (5.1%). The abundance of pseudomonads was highly variable depending on the soil samples. In the culture-independent analysis, soil microbial community was investigated by using phospholipid fatty acid (PLFA) method. Principal component analysis (PCA) showed that a specific grouping for microbial community structure in the greenhouse soils was not observed based on cultivated crops and investigated sites. The results revealed that the greenhouses soils examined are relatively sound managed in terms of soil chemical contents and microbial properties.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.257-262
• /
• 2021

The pinning method is the traditional method to produce strawberry transplants. But, cultivating the pinning transplant is a labor-intensive operation and needs a long labor period. The cutting method has been considered as an effective alternative to the pinning method, due to the relatively short labor period and works time. This study was conducted to investigate the labor period, work time, and growth between pinning and cutting methods for strawberry transplants. The 'Maehyang' strawberry was cultivated at each pinning and cutting strawberry greenhouses. The time for special works on pinning method (pinning work, elimination of mother plant, and division of daughter plant), and cutting method (cutting collection, pretreatment before storage, and cutting work) were measured. The pinning method needed 6 tasks (planting of mother plant, maintaining of mother plant, pinning work, maintaining of daughter plant, elimination of mother plant, and division of daughter plant) for 158 days, and cutting method needed 4 tasks (collection and storage of cutting, cutting work, misting, and maintaining of transplants) for 113 days to cultivate transplants for fruit. And pinning method needed more work time than the cutting method. There was no significant difference between the growth of pinning and cutting transplants. These results showed that the cutting method saved more labor period, work time than pinning during the nursery period without losing transplant quality.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.3
• /
• pp.41-57
• /
• 2021

This study evaluated the application of water quality management measures using the SWAT model and the effectiveness of the measures using the load duration curve targeting the Seohwacheon watershed located upstream of Daecheongho. As water quality management measures, artificial wetlands, reduction of neglected livestock, reduction of runoff from greenhouses, restoration of ecological rivers, application of LID technology, and management of point sources were applied. The applied technology evaluated the efficiency of water quality improvement measures by using the target water quality excess rate and the degree of load reduction for each sulfur through the load duration curve. The load duration curve was created by creating a long-term flow duration curve using SWAT and multiplying it by the target water quality. For the target water quality, the value corresponding to the 60th percentile was set as the target water quality using the 10-year data from the Okcheoncheon water quality observation point located in the downstream of Seohwacheon. Through this study, it was possible to confirm the applicability of various water quality measures through the SWAT model, and to examine the applicability of each period according to the sulfur through the load retention curve.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.4
• /
• pp.23-32
• /
• 2019

Increasing crop production with the same amount of resources is essential for enhancing the economy in agriculture. The first prerequisite is to understand relationships between the resources. The concept of WEF (Water-Energy-Food) nexus analysis was first introduced in 2011, which helps to interpret inter-linkages among the resources and stakeholders. The objective of this study was to analyze energy-water nexus in greenhouse cultivation by estimating reference evapotranspiration and heating load. For the estimation, this study used the physical model to simulate the inside temperature of the agricultural greenhouse using heating, solar radiation, ventilated and transferred heat losses as input variables. For estimating reference evapotranspiration and heating load, Penman-Monteith equation and seasonal heating load equation with HDH (Heating Degree-Hour) was applied. For calibration and validation of simulated inside temperature, used were hourly data observed from 2011 to 2012 in multi-span greenhouse. Results of the simulation were evaluated using $R^2$, MAE and RMSE, which showed 0.75, 2.22, 3.08 for calibration and 0.71, 2.39, 3.35 for validation respectively. When minimum setting temperature was $12^{\circ}C$ from 2013 to 2017, mean values of evapotranspiration and heating load were 687 mm/year and 2,147 GJ/year. For $18^{\circ}C$, Mean values of evapotranspiration and heating load were 707 mm/year and 5,616 GJ/year. From the estimation, the relationship between water and heat energy was estimated as 1.0~2.6 GJ/ton. Though additional calibrations with different types of greenhouses are necessary, the results of this study imply that they are applicable when evaluating resource relationship in the greenhouse cultivation complex.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.2
• /
• pp.97-109
• /
• 2019

Degree days have been determined using temperature data measured at nearby weather stations to a site of interest to produce information for supporting decision-making on agricultural production. Alternatively, the data products of Moderate Resolution Imaging Spectroradiometer (MODIS) can be used for estimation of degree days in a given region, e.g., Korean Peninsula. The objective of this study was to develop a simple tool for processing the MODIS product for estimating cooling degree days (CDD), which would help assessment of heat stress conditions for a crop as well as energy requirement for greenhouses. A set of scripts written in R was implemented to obtain temperature profile data for the region of interest. These scripts had functionalities for processing spatial data, which include reprojection, mosaicking, and cropping. A module to extract air temperature at the surface pressure level was also developed using R extension packages such as rgdal and RcppArmadillo. Random forest (RF) models, which estimate mean temperature and CDD with a different set of MODIS data, were trained at 34 sites in South Korea during 2009 - 2018. Then, the values of CDD were calculated over Korean peninsula during the same period using those RF models. It was found that the CDD estimates using the MODIS data explained >74% of the variation in the CDD measurements at the weather stations in North Korea as well as South Korea. These results indicate that temperature data derived from the MODIS atmospheric products would be useful for reliable estimation of CDD. Our results also suggest that the MODIS data can be used for preparation of weather input data for other temperature-based agro-ecological models such as growing degree days or chill units.

• Korean journal of applied entomology
• /
• v.59 no.4
• /
• pp.421-425
• /
• 2020

We investigated an ecologically-sensitive method to control Polyphagotarsonemus latus in a green perilla polyvinyl house using concentrated pyrethrum. The survival rates of Polyphagotarsonemus latus nymphs and adults to 2%, 4%, and 6% pyrethrum 3 days after spraying were 58.1%, 27.5%, and 22.7% respectively, and 73.4%, 37.3%, and 30.6% at 5 days after spraying. These results show that the most effective control occurred using 6% pyrethrum. To investigating the densities of P. latus on a 1 cm diameter leaf-disk of green perilla, we sprayed the leaf every 10 days from May 10 with 6% pyrethrum 1,000 times and milbemectin EC 2% 1,000 times. The period chosen was one where the incidence of P. latus could be predicted. The density was kept low during the treatment period. However, if leaf damage had already occurred from P. latus, the density could not be decreased by spraying 1 or 2 times each week where milbemectin EC 2% was used, but the population could be reduced when sprayed 3 times. Therefore, in order to effectively control P. latus in green perilla greenhouses, it is important to begin treatment at an early stage when P. latus are first observed.

• Journal of Bio-Environment Control
• /
• v.30 no.1
• /
• pp.19-26
• /
• 2021

In this study, analysis was performed to identify three greenhouses located in the same area using principal component analysis (PCA) and linear discrimination analysis (LDA). The environmental data in the greenhouse were from 3 farms in the same area, and the values collected at 1 hour intervals for a total of 4 weeks from April 1 to April 28 were used. Before analyzing the data, it was pre-processed to normalize the data, and the analysis was performed by dividing it into 80% of the training data and 20% of the test data. As a result of PCA and LDA analysis, it was found that PCA classification accuracy was 57.51% and LDA classification was 67.06%, indicating that it can be classified by greenhouse. Based on the farmhouse data classified in advance, the data of the new environment can be classified into specific groups to determine the tendency of the data. Such data is judged to be a way to increase the utilization of data by facilitating identification.

• Korean journal of applied entomology
• /
• v.59 no.4
• /
• pp.411-416
• /
• 2020

Whitefly populations found in heated tomato greenhouses were monitored across three locations in Korea (Nonsan and Buyeo, Chungnam Province; Iksan, Jeonbuk Province) from November to May during the 2015 -2018 growing seasons. From May to October, surveys were conducted in Jangsu (Jeonbuk Province), where retarding cultivation was performed. Whitefly populations were classified and quantified by location and year. The dominant species were Trialeurodes vaporariorum (Westwood) and Bemisia tabaci (Gennadius). The species populations were mixed, but the frequency of occurrece of B. tabaci was higher than that of T. vaporariorum. Although whitefly populations started to increase in late March, they sharply increased in May and the highest population density was observed at the end of the harvest season. Therefore, the management of greenhouse tomato whiteflies through monitoring should begin in early March. In the case of retarding cultivation, the management of whitefly populations should be implemented in June, before the density of whitefly populations increases.

• Korean Journal of Food Science and Technology
• /
• v.54 no.2
• /
• pp.126-133
• /
• 2022

The objective of this study was to analyze volatile and aroma-active compounds in Korean wild chive (Allium monanthum Maxim.) cultivated in open-fields or greenhouse systems using solvent-assisted flavor evaporation-gas chromatography (GC)-mass spectrometry and GC-olfactometry. Aroma-active compounds were evaluated using aroma extract dilution analysis (AEDA). Twenty-two aroma-active compounds with log₂ flavor dilutions (FD) of 1-10 were detected in Korean wild chive, which was cultivated in an open-field or a greenhouse. 2-Isopropyl-3-methoxypyrazine ("earthy"), 2-sec-butyl-3-methoxypyrazine ("earthy", "musty"), and dipropyl disulfide ("sulfurous") were the most predominant aroma-active compounds with log₂FD of 9-10; this was followed by dimethyl trisulfide ("onion-like") and (E)-1-propenyl propyl disulfide ("fresh onion-like"). The "sulfurous", "earthy", "pungent", and "cabbage-like" aroma notes were strong in Korean wild chive. More intense "pungent" odors were detected in Korean wild chive cultivated in an open-field, whereas more intense "cabbage-like" odors were detected in Korean wild chive cultivated in a greenhouse.

• Particle and aerosol research
• /
• v.17 no.4
• /
• pp.125-132
• /
• 2021

Fresh PM_2.5 smokes emitted from combustion of four biomass materials (pellet, palm fruit fiber (PFF), PKS, and sawdust) in a laboratory-controlled environment were characterized using an attenuated total reflectance-fourier transform infrared (ATR-FTIR) technique. In smoke samples emitted from combustion of pellets, PFF and PKS, which is being used as boiler fuels for greenhouses in rural areas, the organic carbon/elemental carbon (OC/EC) ratios in PM_2.5 were very high (14.0-35.5), whereas in sawdust smoke samples they were significantly low (<4.0) due to the combustion method close to flaming combustion. ATR-FTIR analysis showed that OH(3400-3250 cm^-1), CH₃(2958-2840 cm^-1), CH₂(2910 cm^-1 and 2850 cm^-1), ketone(1726-1697 cm^-1), C=C(1607-1606 cm^-1 and 1515-1514 cm^-1), lignin (1463-1462 cm^-1 and 1430-1428 cm^-1) and -NO₂(1360-1370 cm^-1) peaks were identified in all biomass burning (BB) smoke samples. However, additional peaks appeared depending on the type of biomass. Among the four types of biomass materials, an additional peak of the methylene group CH₃(2872-2870 cm^-1) appeared only in PFF and PKS smoke samples, and a peak of C=O(1685 cm^-1) was also confirmed. And in the case of PKS smoke samples, a peak of aromatic C=C(1593 cm^-1 and 1476 cm^-1) that did not appear in other BB samples was also observed. This indicates that the molecular structure of organic compounds emitted during BB differs depending on the type of biomass materials. The results of this study are expected to provide valuable information to more specifically reveal the effect of BB on PM_2.5 collected in the atmospheric environment.