• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.633-637
• /
• 2001

Oil fly ash is known as one source of raw materials from which vanadium and nickel metals can be recovered. The current recovery process of valuable metals from oil fly ash is mainly the hydrormetallurgy one. Nevertheless, a great amount about 50~80%, of unburned carbon remains as byproduct after hydrormetallursy process. In Taiwan, if hydrormetallursy processes have proceeded, it can be estimated that the annual production of unburned carbon is 25 thousand tons. From the viewpoint of resource recycling, this study is a preliminary study and investigates in recovery of sub micron- graphitized carbon from unburned carbon by a designed process. The designed process included the following steps: 1.selecting a portion with +400mesh size from unburned carbon; 2.treating the selected in ultrasonic waves; 3.using a 400mesh sieve to obtain the product which is under 400mesh; 4.Removal ash from the product. In regard to treatment by ultrasonic waves in the designed process, treating time of ultrasonic waves is a simple and only variance in this study. The results indicate that the production yields increase with the treating time of ultrasonic waves; the production yield in specific conditions of this study can reach about 23%, in which ash content in product is about 2.5%. According to results of SEM, TEM and XRD, the products from the designed process are flakes in shape, several microns in size and graphitized carbon in carbon crystal phase. Except to graphitized carbon, there are a little carbon blacks, which are graphite 2H in carbon crystal phase in the products. Conclusively, the designed process is possibly applicable, by which comes to the recovery of micron- graphitized carbon.

• Tribology and Lubricants
• /
• 제10권4호
• /
• pp.13-26
• /
• 1994

Effects of resin contents, number of carbonization, graphitization, sliding speed, and oxidation on friction and wear behavior of carbon/carbon composite materials were investigated. Friction and wear tests were carried out under various sliding conditions. An experimental setup was designed and built in the laboratory. Stainless steel disks were used as the counterface material. Friction coefficient, emperature, and wear factor were measured with a data acquisition system. Wear surfaces were observed by the scanning electron microscope. It has been shown that the average friction coefficient was increased with the sliding speed in the range of 1.43~6.10 m/s, but it as decreased in the range of 6.10~17.35 m/s. Specimens prepared by different numbers of carbonization. showed variations in friction coefficient and friction coefficient of the graphitized specimen was the highest. Friction coefficients depended on contribution of the plowing and adhesive components. As the number of carbonization was increased, wear factor was reduced. Wear factor of the graphitized specimens dropped further. In the case of graphitized specimens, sliding speed had a large influence on wear behavior. When the tribological experiments were conducted in nitrogen atmosphere, the wear factor was decreased to two thirds of the wear factor obtained in air. It is obvious that the difference was affected by oxidation. Results of friction and wear tests were applied to a neural network system based on the backpropagation algorithm. A neural network may be a valuable tool for prediction of tribological behavior of the carbon/carbon composite material if ample data are present.

• Carbon letters
• /
• 제22권
• /
• pp.25-35
• /
• 2017

The aim of the work was to investigate the thermo-electrical properties of low cost and rapidly produced randomly oriented carbon/carbon (C/C) composite. The composite body was fabricated by combining the high-pressure hot-pressing (HP) method with the low-pressure impregnation thermosetting carbonization (ITC) method. After the ITC method step selected samples were graphitized at $3000^{\circ}C$. Detailed characterization of the samples' physical properties and thermal properties, including thermal diffusivity, thermal conductivity, specific heat and coefficient of thermal expansion, was carried out. Additionally, direct current (DC) electrical conductivity in both the in-plane and through-plane directions was evaluated. The results indicated that after graphitization the specimens had excellent carbon purity (99.9 %) as compared to that after carbonization (98.1). The results further showed an increasing trend in thermal conductivity with temperature for the carbonized samples and a decreasing trend in thermal conductivity with temperature for graphitized samples. The influence of the thickness of the test specimen on the thermal conductivity was found to be negligible. Further, all of the specimens after graphitization displayed an enormous increase in electrical conductivity (from 190 to 565 and 595 to 1180 S/cm in the through-plane and in-plane directions, respectively).

• 약학회지
• /
• 제39권4호
• /
• pp.395-400
• /
• 1995

The sorption and desorption properties of four adsorbents were evaluated for the trace enrichment of clobazam from biological samples. Graphitized carbon black(GCB) gaved the highest dynamic adsorption coefficient. Among the six organic solvents examined, acetone gave the highest desorption coefficient for the clobazam adsorbed on GCB. Using the GCB column, the optimum elution volume of the eluting solvent was evaluated from the on-line monitored breakthrough curve for clobazam. When GCB as the solid adsorbent and acetone as the eluting solvent were used for the solidphase extraction of clobazam from serum, the recoveries were higher than 83% with good reproducibility in the concentration range of 20-50 $\mu\textrm{g}$/ml.

• 약학회지
• /
• 제36권2호
• /
• pp.120-125
• /
• 1992

Ths sorption and desorption properties of four different solid adsorbents were evaluated for the trace enrichment of diphenylhydantoin from biological samples. Graphitized carbon black(GCB) gave the highest adsorption coefficient. And among the organic solvents examined, methanol gave the highest desorption coefficient. Using the GCB column, the optimum elution volume of the eluting solvent was evaluated from the breakthrough curve of diphenylhydantoin. The usefulness of GCB as the solid adsorbent was examined for the solid-phase extraction of diphenylhydantoin from serum in the concentration range of $20-50\;{\mu}g/ml$.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1998년도 춘계학술발표회 초록집
• /
• pp.9-10
• /
• 1998

• 전기화학회지
• /
• 제1권1호
• /
• pp.14-17
• /
• 1998

MPCF는 Li ion 2차전지용 부극 활물질로 연구되고 있다. 흑연화 MPCF는 높은 방전 용량과 우수한 충방전 효율을 가진다. $0\~1$ V전위영역에서 25 mA/g의 정전류로 충방전할 때의 MPCF/Li전지의 초기 방전 용량은 300 mAh/g이며, 충방전 효율은 $90\%$ 이상을 나타낸다. $LiCoO_2$을 정극 활물질로, 혼합 탄소재료를 부극 활물질로 사용하여 원통형 Li ion 2차전지를 제작하였다. Li ion 2차전지의 수명 특성을 향상하기 위하여, 흑연화 MPCF에 이종 탄소 재료를 $10 wt\%$ 혼합하였다. 혼합 탄소재료를 사용한 Li ion 2차전지의 수명 성능은 흑연화 MPCF만을 사용한 전지보다 우수하였다.

• 한국재료학회지
• /
• 제11권12호
• /
• pp.1074-1079
• /
• 2001

To study the distribution of boron and the boron effect for nucleation of graphite in high carbon steel, neutron induced autoradiography method is used. High carbon steel is easy to make the graphitization by addition of boron. It is easy to analysis of boron distribution using neutron radiography with neutron fluence of $1.9$\times${\times}10^{13}/cm^2$in the boron added high carbon steel. By the neutron induced autoradiography technique, it was found that the distribution of boron depended on boron content, graphitiging temperature and time. And by the analysis of secondary ion mass spectroscopy (SIMS) and electron probe micro analysis (EPMA), boron or boride were acted at nucleation site of graphite in high carbon steel.

• Bulletin of the Korean Chemical Society
• /
• 제24권12호
• /
• pp.1827-1831
• /
• 2003

Field emission of carbon nanotubes (CNTs) fabricated by disproportionation of CO has been studied. CNTs fabricated on well-ordered Co nanowire arrays formed on the porous anodic aluminum oxide templates were well graphitized, uniform in diameter and aligned vertically with respect to the plane of the template, and showed a good field emission property. Very uniform emissions were observed from the CNTs fabricated at relatively low temperature, $500-600^{\circ}C$. Low fabrication temperature such as $500^{\circ}C$ could make it possible to fabricate CNTs on soda lime glass, a low-cost substrate, for display panel.

• 전기화학회지
• /
• 제12권2호
• /
• pp.142-147
• /
• 2009

탄소 담지체의 결정도와 형태가 전기화학적 부식특성과 입자뭉침 현상에 미치는 영향을 평가하기 위해서on-line mass spectrometry와 cyclic voltammogram(CV)법을 사용하였다. 부식실험은 단위 전지형태에서1.4 V의 정전압 조건으로 30분간 시행되었으며 이 때 발생한 $CO_2$ 의 양을 on-line mass spectrometry로 측정하였다. 실험 결과 결정성이 높은 carbon nanofiber (CNF)를 사용한 Pt/CNF 촉매가 결정도가 낮은 담지체를 사용한 상용 Pt/C 촉매보다 $CO_2$ 발생량이 적어 전기화학적 부식에 대한 저항성이 큰 것으로 나타났다. 부식실험 전후의 임피던스와 CV측정에서도 탄소 부식의 영향이 적은 Pt/CNF에서 그 변화가 크지 않은 것으로 관찰되었다. 이러한 결과는 탄소 부식이 고분자 전해질형 연료전지(PEMFC)의 내구성을 결정하는 중요한 요소임을 보여준다. 하지만 탄소 부식이 영향을 미치지 않는 조건에서 실시한 반복 CV 실험 결과 촉매 입자 이동에 의한 뭉침현상은 Pt/CNF에서 더 큰 것으로 나타났다.