• Carbon letters
• /
• 제4권3호
• /
• pp.111-116
• /
• 2003

Carbon/carbon composites were developed using PAN based carbon fibres and phenolic resin as matrix in different volume fractions and heat treated to temperatures between $1000^{\circ}C$ to $2500^{\circ}C$. Although both the starting precursors are nongraphitizing hard carbons individually, their composites lead to very interesting properties e.g. x-ray diffractograms show the development of graphitic phase for composites having fibre volume fractions of 30~40%. Consequently the electrical resistivity of such composites reaches a value of $0.8\;m{\Omega}cm$, very close to highly graphitic material. However, it was found that by increasing the fibre volume fraction to 50~60%, the trend is reversed. Optical microscopy of the composites also reveals the development of strong columnar type microstructure at the fibre (matrix interface due to stress graphitization of the matrix. The study forcasts a unique possibility of producing high thermal conductivity carbon/carbon composites starting with carbon fibres in the chopped form only.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.28-51
• /
• 2018

Graphitic carbon nitride ($g-C_3N_4$) as a fascinating visible light active semiconductor photocatalyst has medium band gap, non-toxic nature, stable chemical structure and high thermal stability. Recently, intensive researches are focused on photocatalytic activity of $g-C_3N_4$ for wastewater treatment. This review demonstrates latest progress in fabrication of graphitic carbon nitride $C_3N_4$ incorporated nanocomposite to explore photocatalytic ability for water purification. The $g-C_3N_4$-based nanocomposites were categorized as $g-C_3N_4$ metal-free nanocomposite, noble metals/$g-C_3N_4$ heterojunction, non-metal doped $g-C_3N_4$, transition and post transition metal based $g-C_3N_4$ nanocomposite. Apart from fabrication methods, we emphasized on elaborating the mechanism of activity enhancement during photocatalytic process.

• Korean Chemical Engineering Research
• /
• 제61권4호
• /
• pp.627-634
• /
• 2023

Graphitic carbon nitride (g-C₃N₄) has attracted considerable attention since its discovery for its catalysis of water splitting to hydrogen and oxygen under visible light irradiation. However, pristine g-C₃N₄ confers only low photocatalytic efficiency and requires surface cocatalysts to reach moderate activity due to a lack of accessible surface active sites. Inspired by the high specific surface area and superior electron transfer of graphene, we developed a strongly coupled binary structure of graphene and g-C₃N₄ aerogel with 3D porous skeleton. The as-prepared 3D structure photocatalysts achieve a high surface area that favors efficient photogenerated charge separation and transfer, enhances the light-harvesting efficiency, and significantly improves the photocatalytic hydrogen evolution rate as well. The photocatalyst performance is observed to be optimized at the ratio 3:7 (g-C₃N₄:GO), leading to photocatalytic H₂ evolution of 16125.1 mmol. g^-1. h^-1 under visible light irradiation, more than 161 times higher than the rate achieved by bulk g-C₃N₄.

• Journal of Electrochemical Science and Technology
• /
• 제12권2호
• /
• pp.204-211
• /
• 2021

We report, synthesis of high surface area composite carbon aerogel using additive based polymerization technique by incorporating graphitic porous carbon as additive. This additive was separately prepared using sol-gel polymerization of resorcinol-furfuraldehyde in iso-propyl alcohol medium at much above the routine gelation temperature to yield porous carbon (CA-IPA) having graphitic layered morphology. CA-IPA exhibited a unique combination of meso-pore dominated surface area (~ 700 m²/g) and good conductivity of ~ 300 S/m. The composite carbon aerogel (CCA) was synthesized by traditional aqueous medium based resorcinol-formaldehyde gelation with CA-IPA as additive. The presence of CA-IPA favored enhanced meso-porosity as well as contributed to improvement in bulk conductivity. Based on the surface area characteristics, CCA-8 composition having 8% additive was found to be optimum. It showed specific surface area of ~ 2056 m²/g, mesopore area of 827 m²/g and electrical conductivity of 180 S/m. The electrode formed with CCA-8 showed improved electrochemical behavior, with specific capacitance of 148 F/g & ESR < 1 Ω, making it a better choice as super capacitor for energy storage applications.

• 한국재료학회지
• /
• 제25권12호
• /
• pp.672-677
• /
• 2015

Co-embedded graphitic porous carbon nanofibers(Co-GPCNFs) are synthesized by using an electrospinning method. Their morphological, structural, electrochemical, and photovoltaic properties are investigated. To obtain the optimum condition of Co-GPCNFs for dye-sensitized solar cells(DSSCs), the amount of cobalt precursor in an electrospinning solutuion are controlled to be 0 wt%(conventional CNFs), 1 wt%(sample A), and 3 wt%(sample B). Among them, sample B exhibited a high degree of graphitization and porous structure compared to conventional CNFs and sample A, which result in the performance improvement of DSSCs. Therefore, sample B showed a high current density(JSC, $12.88mA/cm^2$) and excellent power conversion efficiency(PCE, 5.33 %) than those of conventional CNFs($12.00mA/cm^2$, 3.78 %). This result can be explained by combined effects of the increased contact area between the electrode and elecytolyte caused by improved porosity and the increased conductivity caused by the formation of a high degree of graphitization. Thus, the Co-GPCNFs may be used as a promising alternative of Pt-free counter electrode in DSSCs.

• Korean Chemical Engineering Research
• /
• 제54권4호
• /
• pp.560-567
• /
• 2016

본 연구에서는 $Ni/Al_2O_3$ 촉매의 수증기 개질반응 및 표면 특성을 조사하였다. 조촉매로써 선정된 Mo를 담지하여 제조한 Ni-Mo계 촉매를 Ni계 촉매와 반응활성 비교결과 효율증진 인자를 확인할 수 있다. $H_2$-TPR 및 XPS 분석을 통하여 효율이 저하되는 특성을 확인하였다. 수증기 개질반응 long run 실험 후 촉매표면에 침적된 carbon의 침적특성 및 결합구조, 기화특성을 확인하기 위하여 $O_2$-TPO 분석을 수행하였다. 본 연구를 통하여 수증기 개질반응에서 Ni과 강한 상호작용으로 결합하여 촉매의 반응활성 저하를 일으키는 graphitic carbon 종 형성을 억제함으로 Ni-Mo계 촉매에서 내구성이 증진됨을 확인할 수 있다.

• 한국진공학회지
• /
• 제12권1호
• /
• pp.70-77
• /
• 2003

전이금속을 촉매로 이용하여 화학기상증착법 (CVD)으로 탄소나노튜브 (CNT)를 성장시킬 때, 질소분위기가 성장을 증진시킨다는 사실은 잘 알려져 있다. 본 논문에서는 질소분위기에 의한 CNT 성장증진의 원인이 활성화 질소이며, 활성화 질소가 성장과정 중 CNT의 탄소와 결합함으로써 성장증진효과가 일어남을 보여주었다. 이 결과는 질소의 결합이 튜브상의 흑연판을 만드는데 필요한 탄성변형에너지를 낮추어 주는 역할을 한다는 CNx 박막의 이론적 계산결과와 일치한다. 따라서, 질소의 결합에 의한 CNT의 성장증진 효과는 튜브상의 흑연판 핵 생성과 CNT의 성장에 필요한 임계 에너지의 감소에 의한 것이다.

• Bulletin of the Korean Chemical Society
• /
• 제32권7호
• /
• pp.2369-2376
• /
• 2011

Effect of heat treatment of carbon nanofibers (CNF) on electrical properties and crystallization behavior of polypropylene was reported. Two types of CNFs (untreated and heat treated at 2300 $^{\circ}C$) were incorporated into polypropylene (PP) using intensive mixing. A significant drop in volume resistivity was observed with composites containing untreated 5 wt % and heat treated 3 wt % CNF. In non-isothermal crystallization studies, both untreated and heat treated CNFs acted as nucleating agents. Composites with heat treated CNFs showed a higher crystallization temperature than composites with untreated CNFs did. TEM results of CNF revealed that an irregular structure of CNFs can be converted into the continuous graphitic structure after heat treatment. Furthermore, STM showed that the higher carbonization temperature leads to the higher graphite degree which presents the larger carbon network size, suggesting that a more graphitic structure of CNFs led to a higher crystallization temperature of PP.

• 한국세라믹학회지
• /
• 제30권10호
• /
• pp.852-858
• /
• 1993

The effect of coal tar ptch-impregnated carbon materials which were made from petroleum coke was investigated at various pressure time and impregnation-sintering cycle. As a result, density and bending strength of the carbon materials were remarkably increased in the condition of pressure times of 5hrs and of the cycle of 3rd times. And the value of d002 and Lc of the graphitic carbon sintered at 230$0^{\circ}C$ shwoed 3.387$\AA$ and 167$\AA$, respectively.

• 한국재료학회지
• /
• 제26권11호
• /
• pp.649-655
• /
• 2016

Ni nanoparticles (NPs)-graphitic carbon nanofiber (GCNF) composites were fabricated using an electrospinning method. The amounts of Ni precursor used as catalyst for the catalytic graphitization were controlled at 0, 2, 5, and 8 wt% to improve the photovoltaic performances of the nanoparticles and make them suitable for use as counter electrodes for dye-sensitized solar cells (DSSCs). As a result, Ni NPs-GCNF composites that were fabricated with 8 wt% Ni precursors showed a high circuit voltage (0.73 V), high photocurrent density ($14.26mA/cm^2$), and superb power-conversion efficiency (6.72%) when compared to those characteristics of other samples. These performance improvements can be attributed to the reduced charge transport resistance that results from the synergetic effect of the superior catalytic activity of Ni NPs and the efficient charge transfer due to the formation of GCNF with high electrical conductivity. Thus, Ni NPs-GCNF composites may be used as promising counter electrodes in DSSCs.