• 대한기계학회논문집A
• /
• 제21권8호
• /
• pp.1291-1297
• /
• 1997

Elastic-plastic finite element(FE) simulation was performed for polycrystalline solids subjected to plane strain tensile loading. Using Asaro's double slip crystal plasticity model, the polycrystalline solids were modeled by assigning different initial slip directions to each grain. From the FE calculations, the microscopic deformation characteristics of polycrystalline solids were analyzed. Moreover, the effect of grain size and grain boundaries on the deformation characteristics were clarified.

• 자원환경지질
• /
• 제33권3호
• /
• pp.195-204
• /
• 2000

order to investigate physical characteristics and element concentrations of sediments, coastal bottom sediments were collected at 20 stations in the vicinity of Youngkwang Nuclear Power Plant. After air drying of samples in the laboratory. article size distribution was examined by Master sizer (X-350F), radio-activity by HPGe ${\gamma}$-spectrphotometer, and element concentrations by ICP-AES and AAS. According to particle size analysis , sediments are mainly composed of silt fraction weith 23% of sand, 65% of silt and 12% of clay on average. Most sediments are derived from muddy environment that silt dominates with the characteristics of 5.3${\varsigma}$ mean particle size, poorly sorted, very fine skewed and lepto-kurtic. Only two sediments are well sorted with sandy silt owing to wind, winnowing action, tide and current andits complex reactions. Element concentrations in the coastal bottom sediments are relatively high at finer sediment and show significant relationship with grain size. Index of geoaccumulation by heavy metals at every sampling station is classified as practically unpolluted. The radioactivities of the sediments were measured for 15 isotope elements, and 2 elements of K-40 and Cs-137 were detected in most sediments. The K-40 is the natural nuclide and the artificial nuclide of Cs-137 was thought to be derived from the fallout of past nuclear weapon test. The results of correlation coefficient between grain size and radioactivity shows that the activity of Cs-137 significantly increases in finer grain.

• 한국작물학회지
• /
• 제47권1호
• /
• pp.36-41
• /
• 2002

Two rice varieties, 'Oochikara' with large grain and 'Hwayeongbyeo' and their progenies (F$_1$, F$_2$, B$_1$ and B$_2$) were tested to understand gene action of morphological traits of rice grain and their relationships. The evaluated traits were 1,000-grain weight, grain length, width, thickness, length-width ratio and chalkiness of brown rice. Correlation between grain weight and chalkiness was highly significant in the all progenies, and grain length were not associated with width and thickness in an F$_2$ population. Scaling test and jonit scaling test revealed that inheritance of grain traits were fitted to additive-dominance model without epistasis. Additive effects for the traits were much greater than the dominance effects.

• 한국지형학회지
• /
• 제17권1호
• /
• pp.15-27
• /
• 2010

이 연구는 바람아래해수욕장 주변의 퇴적물 입도조성을 시·공간적으로 분석하여 퇴적환경 변화특성을 고찰하고자 하였다. 연구결과, 2009년 겨울철 표층퇴적물은 크게 자갈, 모래, 역질사, 역니질사, 니질사, 실트질사, 모래질실트 등의 7개 퇴적상으로 구분되었다. 평균입도를 시계열 분석(2002~2009)한 결과, 간석지 퇴적물은 평균 입도가 세립해지고, 분급은 불량해졌다. 그러나 해빈지역은 동일시기에 퇴적물의 입도가 조립화 되었고 분급이 양호해졌다. 이러한 결과는 해빈과 간석지의 퇴적환경 변화가 서로 다른 경향성을 가지고 있기 때문이다. 즉, 할미섬을 중심으로 남서쪽 해빈지역은 외해로 열려 있어 상대적으로 고에너지 환경으로 세립질 퇴적물이 제거되는 환경에서 퇴적된 결과이다. 간석지 중 가장 안쪽의 만입지의 세립화는 왕복성 조류에 의해서 유입된 퇴적물이 정조시에 퇴적되었거나 지형적인 영향에 의한 에너지 감소로 퇴적된 것으로 판단된다. 남서쪽 외해 쪽의 간석지들의 세립화 원인은 규모가 큰 섬옷섬이 외해로부터 유입되는 파랑을 막아주어 상대적으로 저에너지 환경 하에 놓이면서 조석의 영향을 받으면서 세립질 퇴적물질들이 지속적으로 퇴적된 결과로 판단된다.

• 한국지리정보학회지
• /
• 제3권1호
• /
• pp.44-56
• /
• 2000

Landsat TM 영상을 이용하여 곰소만 간석지의 미지형을 분류하고, 현지조사를 통하여 분류된 각 미지형의 퇴적물 입도 특성과 지형특성을 밝혔다. 내만 쪽의 mud flat는 갯골과 갯골 사이의 평탄지로 이루어져 있으며, 평균입경이 $4{\phi}$ 이하의 세립질이고 분급은 1 S.D. 이상이며, positive skewness를 보인다. 만구쪽에 분포하는 sand flat는 갯골이 없이 평탄한 지형을 이루며 ripple mark가 발달해 있다. 분급이 좋은 모래로 대부분 구성되어 있고 negative skewness를 보인다. mixed flat는 mud flat 와 sand flat와의 중간적 특징을 보인다.

• 열처리공학회지
• /
• 제16권4호
• /
• pp.197-204
• /
• 2003

Honeycomb structure has been fabricated by brazing method using 0.1 wt%C and 1.0wt%C carbon steel core and STS304 stainless steel face sheet. Core shear strength ratio in W and L directions was 1:1.03 in 7 mm cell size, whereas 1:1.45 in 4 mm cell size. Flexural strength on face sheet was 166.4 MPa (0.1 wt%C, W direction), 171.1 MPa (0.1 wt%C, L direction), and 120.2 MPa (1.0 wt%C, W direction) in 7 mm cell size. And in 4mm cell size specimen, it was 169.2 MPa (0.1 wt%C, W direction), 224.2 MPa (0.1 wt%C, L direction). This means that flexural strength of 0.1 wt%C core material was higher than that of 1.0wt%C core material, which was contrary to expectation. SEM and EDS analysis represented that grain boundary diffusion had occurred in0.1 wt%C core, but no grain boundary diffusion in 1.0 wt%C core. And corrugated surface of 0.1 wt%C core was flat, whereas that of 1.0 wt%C core was not flat. As a result, contact area between two 1.0 wt%C cores was much less than that of 0.1 wt% cores, It is thought to be main reason for lower flexural strength of 1.0 wt%C core.

• 한국분말재료학회지
• /
• 제23권6호
• /
• pp.409-413
• /
• 2016

Electrical wire explosion in liquid media is a promising method for producing metallic nanopowders. It is possible to obtain high-purity metallic nanoparticles and uniform-sized nanopowder with excellent dispersion stability using this electrical wire explosion method. In this study, Ni-Fe alloy nanopowders with core-shell structures are fabricated via the electrical explosion of Ni-Fe alloy wires 0.1 mm in diameter and 20 mm in length in de-ionized water. The size and shape of the powders are investigated by field-emission scanning electron microscopy, transmission electron microscopy, and laser particle size analysis. Phase analysis and grain size determination are conducted by X-ray diffraction. The result indicate that a core-shell structured Ni-Fe nanopowder is synthesized with an average particle size of approximately 28 nm, and nanosized Ni core particles are encapsulated by an Fe nanolayer.

• 한국표면공학회지
• /
• 제38권4호
• /
• pp.156-162
• /
• 2005

Nickel-iron nanocrystalline alloys with different compositions and grain sizes were fabricated by electro-plating for MEMS devices. The iron content of the deposits was changed by varying the nickel/iron ion ratio in the electrolyte. X-ray diffraction (XRD) analysis was applied for measuring the strength of the texture and grain size of the deposits. The nickel/iron atom ratio of the deposits was analyzed by EDS. The hardness of the alloys was evaluated by Vickers hardness indenter. The internal stress of the deposits was measured by Thin Film Stress Measurement using Stoney's formula. Surface morphology and roughness were investigated by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The results of this study revealed that at a grain size of approximately $17\~24$nm the hardness, internal stress and roughness depend strongly on the iron content. With increasing the iron content, the hardness and internal stress of the deposits increased. An excellent correlation between the increase in the internal stress and the loss of (200) texture was found.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.59-65
• /
• 2003

Four kinds of $Si_3N_4$-based ceramic cutting tools with different sintering time were fabricated to investigante the effect of sintering time on the microstructure, mechanical properties, grain sizes and the cutting performance. An endeavor was also made to determine the relation among mechanical property, Brain size and tool life. $Si_3N_4$ home made cutting tool sintered for 1 hour under $1760^{\circ}$ temperature and 25MPa pressure showed the best cutting performance among selected ceramic tools during machining both Bray cast iron and heat treated SCM440. Multiple linear regression model was used to estimate the tool lift from mechanical property, grain size and showed good result. It was also shown that hardness imposed the biggest offect on tool life.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.107.1-107.1
• /
• 2012

Because of beautiful glossy and color, the value of gold leverage is very high in Europe. For improve the quality of white gold, we performed heat treatment on 14K white gold alloys at various age-hardening conditions. Age-hardening behavior and the related phase transformation changes were studied to elucidate the hardening mechanism of 14K white gold alloys. For solid solution treatment [ST], casted 14K white gold alloy specimens were treated at high temperature ($750^{\circ}C$) during 30 minute, and the specimens dropped to water for quenching immediately. For Age-hardening treatment [AT], the specimens were treated at various temperatures ($250^{\circ}C{\sim}300^{\circ}C$). After the heat treatment, we observed increased hardness from 144 Hv to 214 Hv by Vicker's hardness tester. Variation of the grain size measured by optical microscopy (OM) and scanning electron microscopy (SEM) images. By electron probe micro-analysis (EPMA) mapping analysis, we investigated that irregular particles were changed uniformly. After heat treatment, 14K white gold alloys showed improved hardness and became uniformity of grain size by age-hardening treatment.