• Journal of computational fluids engineering
• /
• v.3 no.1
• /
• pp.22-29
• /
• 1998

Parallel implementation is conducted for a SIMPLER finite volume model. The present parallelism is based on domain decomposition and explicit message passing using MPI and SHMEM. Two parallel solvers to tridiagonal matrix equation are employed. The implementation is verified on the Cray T3E system for a benchmark problem of natural convection in a sidewall-heated cavity. The test results illustrate good scalability of the present parallel models. Performance issues are elaborated in view of convergence as well as conventional parallel overheads and single processor performance. The effectiveness of a localized matrix solution algorithm is demonstrated.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.397-403
• /
• 2010

The Immersed boundary method(IBM) is one of CFD techniques which can simulate flow field around complex objectives using simple Cartesian grid system. In the previous studies the IBM has mostly been implemented to fractional step method based Navier-Stokes solvers. In these cases, pressure buildup near IB was found to occur when linear interpolation and stadard mass conservation is used and the interpolation scheme became complicated when higher order of interpolation is adopted. In this study, we implement the IBM to an incompressible Navier-Stokes solver which uses SIMPLE algorithm. Bi-linear and quadratic interpolation equations were formulated by using only geometric information of boundary to reconstruct velocities near IB. Flow around 2D circular cylinder at Re=40 and 100 was solved by using these formulations. It was found that the pressure buildup was not observed even when the bi-linear interpolation was adopted. The use of quadratic interpolation made the predicted aerodynamic forces in good agreement with those of previous studies.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.561-564
• /
• 2002

For the reduction of fuel consumption of high speed, the aerodynamic drag must be reduced. In early vehicle design process, it is very important to have information about aerodynamic characteristics of design models. In this phase CFD methods are usually used to predict the aerodynamic forces. But commercial programs using turbulence models cannot give a good agreement with experimental result and have also problems with convergence. PowerFLOW employs a new technology called DIGITAL PHYSICS, which provides a different approach to simulating fluids. DIGITAL PHYSICS uses a lattice-based approach (extended from lattice-gas and lattice-Boltzmann methods) where time, space and velocity are discrete. This discrete system represents the Wavier-Stokes continuum behavior without the numerical instability Issues of traditional CFD solvers, such as convergence. In this paper, aerodynamic performance of vehicles are simulated using PowerFLOW by Exa and results are compared with experimental wind tunnel data.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1291-1296
• /
• 2003

The objective of the present research is to develop a wavelet-based multiscale adaptive Galerkin method for membrane eigenvalue analysis. Since approximate eigensolutions at a certain resolution level can be good guesses, which play an important role in typical iterative solvers, at the next resolution level, the multiresolution iterative solution approach by wavelets can improve the solutionconvergence rate substantially. The intrinsic difference checking nature of wavelets can be also utilized effectively to develop an adaptive strategy. The present wavelet-based approach will be implemented for the simplest vector iteration method, but some important aspects, such as convergence speedup, and the reduction in the number of nodes can be clearly demonstrated.

• Journal of Aerospace System Engineering
• /
• v.2 no.2
• /
• pp.20-27
• /
• 2008

The characteristics of compressible flow are different from those of incompressible flow from the mathematical and physical point of view. Therefore, the way to solve the flowfield is different between compressible flow and incompressible flow. In general, density-based numerical algorithm is mainly used for compressible flow solver development. On the other hand, incompressible flow solver prefers to use pressure-based numerical algorithm. In this research, a compressible Navier-Stokes flow solver is developed by means of extending from pressure-based incompressible numerical algorithm to handle both compressible and incompressible flows using the same flow solver. The present flow solver is tested at various speed ranges and compared with the solutions of density-based compressible flow solver. Numerical results show a good agreement between two flow solvers.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.831-838
• /
• 2004

A fluid-solid conjugate solver has been newly developed and applied to an actual engine disk system. Most of the currently available conjugate solvers lack the special thermal modeling for turbomachinery disk system applications. In the present new code, these special models are implemented to expand the applicability of the conjugate method and to reduce the required computational resources. Most of the conjugate analysis work so far are limited to the axisymmetric framework. However, the actual disk system includes several non-axisymmetric components which inevitably affect the local heat transfer phenomena. Also the previous work devoted to this area usually concentrate their efforts on the steady-state thermal field, although the one in the transient condition is more critical to the engine components. This paper presents full 3D conjugate analysis of a single stage high pressure turbine rotor-stator disk system to assess the three-dimensional effects (Fig. 1). The analysis is carried out not only in the steady-state but also in the engine accelerating transient condition. The predicted temperatures shows good agreement with measured data.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.3
• /
• pp.540-558
• /
• 2015

Maneuvering oblique towing test is simulated in a Computational Fluid Dynamic (CFD) environment to obtain the linear and nonlinear velocity dependent damping coefficients for a DTMB 5512 model ship. The simulations are carried out in freely accessible OpenFOAM library with three different solvers, rasInterFoam, LTSInterFoam and interDyMFoam, and two turbulence models, $k-{\varepsilon}$ and SST $k-{\omega}$ in presence of free surface. Turning and zig-zag maneuvers are simulated for the DTMB 5512 model ship using the calculated damping coefficients with CFD. The comparison of simulated results with the available experimental shows a very good agreement among them.

• Journal of computational fluids engineering
• /
• v.17 no.1
• /
• pp.44-53
• /
• 2012

Immersed boundary method(IBM) is a numerical scheme proposed to simulate flow field around complex objectives using simple Cartesian grid system. In the previous studies, the IBM has mostly been implemented to fractional step method based Navier-Stokes solvers. In this study, we implement the IBM to an incompressible Navier-Stokes solver which uses SIMPLE algorithm. The weight coefficients of the bi-linear and quadratic interpolation equations were formulated by using only geometric information of boundary to reconstruct velocities near IB. Flow around 2D circular cylinder at Re=40 and 100 was solved by using these formulations. It was found that the pressure buildup was not observed even when the bi-linear interpolation was adopted. The use of quadratic interpolation made the predicted aerodynamic forces in good agreement with those of previous studies. For an analysis of moving boundary, we smulated an oscillating circular cylinder with Re=100 and KC(Keulegan-Carpenter) number of 5. The predicted flow fields were compared with experimental data and they also showed good agreements.

• Journal of Gifted/Talented Education
• /
• v.20 no.2
• /
• pp.527-546
• /
• 2010

As research results, male schoolchildren were found to solve problems more easily in the area of basic process skills while female schoolchildren were found to solve problems in the area of integrated process skills. Schoolboys showed the high tendency to solve problems in a planning pattern by memory, or solving pattern in which they are fully aware of the contents of both questions and choices in answer sheets, or the pattern which they are fully aware of distracters in answer sheets; in contrast, schoolgirls showed a high tendency to get a good result by analyzing both questions & choices in answer sheets or analyzing a chart, graph and illustration, which explains that female schoolchildren tend to solve problems in more diverse ways than male schoolchildren. In case of a poor achiever, male schoolchildren tend to make a failure while trying to find answers in an inadequately understood state or trying to solve on mistaken memories while doing questions immediately while female schoolchildren showed a lot of solving patterns based on mistaken memories or wrong analyses of a chart, illustration, or graph. Such results are believed to offer the implications on the understanding of male/female schoolchildren in their problem-solving pattern of their exploratory ability in elementary science and on its subsequent program development.

• Journal of computational fluids engineering
• /
• v.19 no.3
• /
• pp.20-23
• /
• 2014

The flow pattern inside the inlet chamber of the tube side is one of the key parameters influencing on the performances of the shell-and-tube type of heat exchangers(STHE). In order to improve the flow distribution, the baffle shaped as the porous plate is installed in the inlet chambers. In the present study, numerical simulation has been performed to investigate the flow features of the tube side of the STHE in sense of the hydraulic performances. The flow fields have been analysed by the three-dimensional Navier-Stokes solvers with the proper turbulent models. Computational domain is ranged in the whole of the tube side of the STHE. The numerical results showed that the presence of the baffles improves the redistribution of the flow injecting to the tube bundels. The good agreements of the numerical results with the experimental results of PIV measurements have been shown for the validation of the numerical methods adopted in the present papers.