• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.21-28
• /
• 1994

This paper discusses the block method on cable stayed bridge. The block method is one of the structural analysis methods, and it calculates the sectional forces and the displacements by combining results of several sub-structural system after analyzing each divided structure by means of finite element method. The block method has two branches, one is based on the force method and the other is based on the displacement method. We can select one of two methods by considering structural stability of divided structures. The conclusion gives some thoughts about cable stayed bridge analysis using this block method. Those are as follows. First, the results of analysis on divided structural system are consistent with those of analysis on global structural system. Second. saving memory volume of computer, we can analyze the complicated multi-cable stayed bridge on personal computer.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3285-3292
• /
• 2012

The interaction of thiazole drug with (6,0) zigzag single-walled boron nitride nanotube of finite length in gas and solvent phases was studied by means of density functional theory (DFT) calculations. In both phases, the binding energy is negative and presenting characterizes an exothermic process. Also, the binding energy in solvent phase is more than that the gas phase. Binding energy corresponding to adsorption of thiazole on the BNNT model in the gas and solvent phases was calculated to be -0.34 and -0.56 eV, and about 0.04 and 0.06 electrons is transferred from the thiazole to the nanotube in the phases. The significantly changes in binding energies and energy gap values by the thiazole adsorption, shows the high sensitivity of the electronic properties of BNNT towards the adsorption of the thiazole molecule. Frontier molecular orbital theory (FMO) and structural analyses show that the low energy level of LUMO, electron density, and length of the surrounding bonds of adsorbing atoms help to the thiazole adsorption on the nanotube. Decrease in global hardness, energy gap and ionization potential is due to the adsorption of the thiazole, and consequently, in the both phases, stability of the thiazole-attached (6,0) BNNT model is decreased and its reactivity increased. Presence of polar solvent increases the electron donor of the thiazole and the electrophilicity of the complex. This study may provide new insight to the development of functionalized boron nitride nanotubes as drug delivery systems for virtual applications.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.5
• /
• pp.391-398
• /
• 2013

Soil organic carbon (SOC) has the potential to promote the soil quality for sustainability and mitigation of global warming. There is little information on organic carbon composition despite of having resistance of carbon degradation in soil. In this study, to understand the effect of volcanic ash on organic carbon composition and quantity in soil, we investigated characteristics of volcanic soil and compared organic carbon composition of soil and humic extract by using $^{13}C$-CPMAS-NMR spectra under soil profiles of Namweon series in Jeju. SOC contents of inner soil profiles were 134.8, 101.3, and 27.4 g C $kg^{-1}$ at the layer of depth 10-20, 70-80 and 90-100 cm, respectively. These layers were significantly different to soil pH, oxalate Al contents, and soil moisture contents. Alkyl C/O-alkyl C ratio in soil was higher than that of humic extracts, which was decreased below soil depth. Aromaticity of soil and humic extract was ranged from 29-38 and 24-32%, which was highest at the humic extract of 70-80 cm in soil depth. These results indicate that the changes of SOC in volcanic ash soil resulted from alteration of organic composition by pyrolysis and stability of organic carbon by allophane in volcanic ash soil.

• International Commerce and Information Review
• /
• v.17 no.2
• /
• pp.3-18
• /
• 2015

This thesis examines the performance and improvement strategy of SWIFTNet TSU's BPO for computerization and suggests the following results: First, the URBPO should be legally complemented, and the SWIFT and banks need to keep improving the systems to meet trade parties' diverse needs. Second, the SWIFTNet TSU's BPO should have an institutionally unified sharing platform with security, stability and convenience. In other words, it is needed to develop services which meet e-payment paradigm and international and regional environments through continued analysis on market changes and flow. Third, in order for the SWIFTNet TSU BPO to evolve into a perfect global system, there should be an innovative payment solution which can meet all trade parties all over the world. For this, technology standardization for a worldwide e-trade payment system is essential. Lastly, based on the results derived from this study, an analysis framework with which more diverse and practical environmental variables can be analyzed should be developed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.1
• /
• pp.177-182
• /
• 2010

Sediment transport around artificial habitat which is induced by the change of flow due to installation of the structure plays a role not only as a defect function of subsidence and burial but also bottom-environment control function. Using Side Scan Sonar (SSS), Differential Global Positioning System (DGPS) and Scuba diving equipment, we investigated a facility condition of a dice reef installed on Pohang coast of the East Sea. Investigation result, at total 139 place, 10,526 dice reef was discovered. As the level which affects function of the above 0.5m, the case 4 place of burial (0.5~1.2m, 2.9%), scour appeared with 3 place (0.5m, 2.2%) and broken was appeared with 183 artificial reefs (1.74%). As a result, dice reef installed Pohang coast appeared to mostly stable.

• Journal of Korea Water Resources Association
• /
• v.37 no.7
• /
• pp.569-579
• /
• 2004

Recently, the extreme drought is often occurred due to the global warming and the serious weather changes. Also, the problems of the water pollution In the developed areas, the oppositions from people in the upper stream area and water concession from the local governments affect the national request to get more clean water resources in upper stream of the undeveloped areas. It also brings on the necessity of recognition for water supply managements. Therefore, as the water demand is rapidly changes in the metropolitan areas, the capability of water supply from the north Han river basin dams should be appropriately investigated. In this study, we developed a simulation system using STELLA (equation omitted) software environment, a shared vision model, to analyze the possibility of the stable water supply from north Han river basin dams. Also, three different rules are applied on this model by dividing the water level to minimum(Rule 1), medium(Rule 2) and maximum(Rule 3). Using the rules, the safety yield changes are analyzed for dam rule curve of the reservoir and hydropower release.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.5
• /
• pp.403-412
• /
• 2018

Recently, GNSS (Global Navigation Satellite System)-derived orthometric height determination has been studied to improve the time and cost-effectiveness of traditional leveling surveying. However, the accuracy of this new survey method was evaluated when unknown points are located lower than control points. In this study, the accuracy of GNSS-derived orthometric height was examined using TPs (Triangulation Points) to verify the stability of surveying in mountainous areas. The GNSS survey data were obtained from Mungyeong, Unbong/Hadong, Uljin, and Jangseong. Three unknown points were surrounded by more than three UCPs (Unified Control Points) or BMs (Benchmarks) following the guideline for applying GNSS-derived orthometric height determination. A newly developed national geoid model, KNGeoid17 (Korean National Geoid 2017), has been applied for determining the orthometric height. In comparison with the official orthometric heights of the TPs, the heights of the unknown points in Mungyeong and Unbong/Hadong differ by more than 20 cm. On the other hand, TPs in Uljin and Jangseong show 15-16 cm of local bias with respect to the official products. Since the precision of official orthometric heights of TPs is known to be about 10 cm, these errors exceed the limit of the precision. Therefore, the official products should be checked to offer more reliable results to surveyors. As an alternative method of verifying accuracy, three different GNSS post-processing software were applied, and the results from each software were compared. The results showed that the differences in the whole test areas did not exceed 5 cm. Therefore, it was concluded that the precision of the GNSS-derived orthometric height was less than 5 cm, even though the unknown points were higher than the control points.

• Tribology and Lubricants
• /
• v.36 no.3
• /
• pp.139-146
• /
• 2020

Global warming has led to an increase in demand of eco-friendly vehicles, such as electric cars, for reducing greenhouse gas emissions, and especially, regulating carbon dioxide generation. In addition, electric vehicles are equipped with an electric drive-type hermetic scroll compressor and a refrigerant, which exhibit current and future trends of using environmentally friendly refrigerants, including R-1234yf. In this study, polyol ester-based refrigeration oils are prepared via condensation esterification of polyol and fatty acids. The oils can be combined with R-1234yf refrigerant for applications in air conditioning and cooling systems of electric vehicles. The structure of synthetic polyol esters is confirmed via ¹H-NMR and FT-IR spectrum analysis, and the composition of the polyol ester is analyzed via gas chromatogram analysis. Furthermore, kinematic viscosity, viscosity index, total acid value, pour point, and color are analyzed as fundamental physical properties of the synthetic polyol esters. The compatibility and chemical stability of the synthetic polyol ester combined with the R-1234yf refrigerant are obtained via high temperature and high pressure oil-resistant refrigerant tests. The changes in the oil color and catalyst activity are observed before and after the experiment to determine whether it is suitable as a refrigerator oil.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.2
• /
• pp.299-306
• /
• 2008

This study was designed to develop microencapsulated Korean mistletoe extract, to determine the stability in vitro and to examine its application in milk. Coating materials used were polyglycerol monostearate (PGMS) and medium-chain triacylglyderol (MCT). The highest efficiency of microencapsulation was 78.3% with 15:1:40 (w/w/v) as PGMS : mistletoe extract : distilled water and 66.1% with 15:1 (w/w) as MCT : mistletoe extract. The size of microcapsule was about 30.0 and $19.5{\mu}m$ with PGMS and MCT, respectively. When microcapsules of mistletoe extract were incubated in simulated gastric fluid at pH 2 for 60 min, 14.8 and 17.2% of lectin was released from capsules which were coated with PGMS and MCT, respectively. Comparatively, 83.2 and 87.3% of lectin was released in simulated intestinal fluid (pH 8) after 60 min incubation of capsules coated with PGMS and MCT, respectively. The subsequent study determined the changes of physicochemical and sensory characteristics of milk with fortification of the mistletoe extract microcapsules during 12 day storage. TBA value was significantly lower in microcapsule-added groups than in the uncapsulated mistletoe extract-added group during the storage. When 100 ppm microencapsulated mistletoe extract was added, the L-, a- and b- values and viscosity were not significantly different from those of the control. In addition, the release of lectin from mistletoe extract over 12 days was 8.3 and 9.5 mg/100 ml in milk containing microcapsules made by PGMS and MCT, respectively. All sensory attributes showed a significant difference in uncapsulated mistletoe extract-added milk compared with other groups. The present study indicated that microcapsules of Korean mistletoe extract could be applied to milk and microcapsules coated with PGMS were effectively released in a simulated intestinal environment.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.5
• /
• pp.716-723
• /
• 2006

A biosurfactant-producing bacterial strain was selected from oil-contaminated soil because of its ability to degrade crude oil and tributyrin $(C_{4:0})$. The strain was identified as Bacillus subtilis A8-8 based on its morphological, biochemical, and physiological characteristics. When B. subtilis A8-8 was grown with crude oil as the sole carbon source, the biosurfactant from the strain emulsified crude oil, vegetable oil, and hydrocarbons. Soybean oil was the optimum substrate for the emulsifying activity and emulsion stability of the biosurfactant, both of which were superior to those of several commercially available surfactants. The biosurfactant was purified by a procedure including HCl precipitation, methanol treatment, and silica-gel chromatography. The partially purified biosurfactant was analyzed by TLC (thin-layer chromatography), SDS-PAGE, and HPLC and it reduced the surface tension of water from 72 mN/m to 26 mN/m at a concentration of 30 mg/l. Therefore, the purified lipopeptide biosurfactant has strong properties as an emulsifying agent and acts as an emulsion-stabilizing agent.