• 한국농공학회지
• /
• 제22권2호
• /
• pp.64-82
• /
• 1980

The aim of this thesis, when water permeates dam, is to study the shape of seepage line and seepage quantity. As for the process, various sand model dams of same capacity were constructed in the water tank : they are a central, middle, inclined, up and down stream point of which is paralled, and filter-installed types. And the slope of seepage line and seepage quantity in these various models for experiment were measured, observed data were analyzed, and several formulas which already published were compared and examined. As for the shape of seepage line, the relation between upstream water level and exit: slope of seepage line, near the entrance and exit point, geometrically similar model, and the shape of seepage line filter-installed were examined. As regards to the seepage quantity, several formulas which already published and testing result values were compared and examined, and relation with the slope of seepage line, the seepage quantity, the slope of upstream point, and the upstream water level were mutually studied. Particulary, when horizontal filter was installed, propriety of the existing formulas for effective filter length w as examined, and the relative position of exit point in various. conditions was also studied.

• 정보처리학회논문지A
• /
• 제8A권1호
• /
• pp.63-69
• /
• 2001

In this paper, we present an interactive 3D character modeling and animation including a data management tool for editing the animation. It includes an animation editor for changing animation sequences according to the modified structure of 3D object in the object structure editor. The animation tool has the feature that it can produce motion data independently of any modeling tool including our modeling tool. Differently from conventional 3D graphics tools that model objects based on geometrically calculated data, our tool models 3D geometric and animation data by approximating to the real object using 2D image interactively. There are some applications that do not need precise representation, but an easier way to obtain an approximated model looking similar to the real object. Our tool is appropriate for such applications. This paper has focused on the data management for enhancing the automatin and convenience when editing a motion or when mapping a motion to the other character.

• Computers and Concrete
• /
• 제15권4호
• /
• pp.673-686
• /
• 2015

R-curve based on the size effect law previously developed for geometrically similar specimens (geometry type III) is extended to geometries with variable depth (geometry type I) as well as with variable notch (geometry type II), where the R-curve is defined as the envelope of the family of critical strain energy release rates from specimens of different sizes. The results show that the extended R-curve for type I tends to be the same for different specimen configurations, while it is greatly dependent on specimen geometry in terms of the initial crack length. Furthermore, the predicted load-deflection responses from the suggested R-curve are found to agree well with the testing results on concrete and rock materials. Besides, maximum loads for type II specimen are predicted well from the extended R-curve.

• Journal of applied mathematics & informatics
• /
• 제40권5_6호
• /
• pp.883-896
• /
• 2022

A hereditary base-b representation, used in the celebrated Goodstein's theorem, can easily be converted into a labeled rooted tree. In this way it is possible to give a more elementary geometric proof of the aforementioned theorem and to establish a more general version, geometrically proved. This view is very useful for better understanding the underlying logical problems and the need to use transfinite induction in the proof. Similar problems will then be considered, such as the so-called "hydra game".

• Computers and Concrete
• /
• 제33권2호
• /
• pp.147-162
• /
• 2024

This study presents a random-aggregate mesoscale model integrating the random distribution of the coarse aggerates and the damage mechanics of the mortar and interfacial transition zone (ITZ). This mesoscale model can generate the random distribution of the coarse aggregates according to the prescribed particle size distribution which enables the automation of the current methodology with different coarse aggregates' distribution. The main innovation of this work is to propose the "correction factor" to eliminate the dimensionally dependent mesh sensitivity of the concrete damaged plasticity (CDP) model. After implementing the correction factor through the user-defined subroutine in the randomly meshed mesoscale model, the predicted fracture resistance is in good agreement with the average experimental results of a series of geometrically similar single-edge-notched beams (SENB) concrete specimens. The simulated cracking pattern is also more realistic than the conventional concrete material models. The proposed random-aggregate mesoscale model hence demonstrates its validity in the application of concrete fracture failure and statistical size effect analysis.

• 설비공학논문집
• /
• 제10권4호
• /
• pp.440-448
• /
• 1998

This paper considers the influence of circumferential wall heat conduction for the case of forced convection around a circular cylinder in cross flow of air. Keeping uniform heat generation from the inner surface of the cylinder in radial direction, heat is transferred by wall conduction in the circumferential direction due to the asymmetric nature of the temperature distribution of the cylinder and by convection around the perimeter of the cylinder. The wall conduction depends on conductivity of the cylinder and size of the cylinder radius and thickness and affects the local convective heat transfer rate significantly for geometrically similar surfaces and flow conditions. A nondimensional conjugation parameter K. (=k$_t$R/k$_w$b) has been used to characterize the effect of the circumferntial wall heat conduction. The small values of conjugation parameter K are found to be associated with large effect of wall conduction on the local convective heat transfer rate.

• 한국해양공학회지
• /
• 제15권3호
• /
• pp.1-8
• /
• 2001

With uniform heat generation within the wall of the cylinder placed in a cross flow, heat flows by conduction in the circumferential direction due to the asymmetric nature of the fluid flow around the perimeter of the cylinder. The circumferential heat flow affects the wall temperature distribution to such an extent that in some cases significantly different results may be obtained for geometrically similar surfaces. In the present investigation, the effects of circumferential wall heat conduction on local convective heat transfer is investigated for the case of forced convection around horizontal cylinder in cross flow of air. Two-dimensional temperature distribution $T_w$/(${\gamma}$,${\theta}$) is presented through the numerical analysis. The one-dimensional and two-dimensional solutions are in good agreement with experimental results of local heat transfer coefficients.

• 제어로봇시스템학회논문지
• /
• 제5권3호
• /
• pp.324-337
• /
• 1999

In this work, a new 3-PSP type spatial 3-degree-of-freedom parallel mechanism is proposed. And a 6 DOF hybrid manipulator which consists of a 3-PPR type planar 3 DOF parallel mechanism and a new 3-PSP type spatial 3-degree-of-freedom parallel mechanism is proposed. Both 3 DOF mechanism modules have closed-form forward position solutions and particularly, 3-PSP spatial module has unique forward position solution. Firstly, the closed-form position analysis and first-order kinematic analysis for the proposed 3-PSP type module are carried out, and the first-order kinematic characteristics are examined via maximum singular value and the isotropic index of the mechanism. It is shown through these analyses that the mechanism has excellent isotrpic property throughout the workspace. Secondly, position and kinematic analysis of the 3-PPR planar module are briefly described. Thirdly, the forward position analysis for the 3-PPR 3-PSP type 6 degree-of-freedom hybrid mechanism consisting of a 3-PPR planar module and a 3-PSP spatial module is performed along with the analysis of the workspace size and first-order kinematic characteristics. The kinematic characteristics of the proposed hybrid manipulator are compared to those of geometrically similar Stewart manipulator.

• 한국추진공학회지
• /
• 제15권1호
• /
• pp.11-18
• /
• 2011

비슷한 형상을 가진 스위스롤 연소기의 물리적 크기에 대한 시험이 레이놀즈수와 담��러수의 독립적인 효과를 알아보기 위해 진행되었다. 이를 통해서 촉매연소와 비촉매연소의 소염한계 경계가 연소기의 크기 감소에 따라 다른 경향으로 좁아지는 것을 알 수 있었다. 추가적으로 연료의 화학적 성질의 중요성을 판단하기 위해 알칸기와 에테르기를 포함한 동종의 다른 형태 연료를 적용하여 시험을 수행하였다. 이러한 결과들을 통해 연소기의 크기와 연료의 형태에 따른 효과로 소형 연소기의 성능 및 그러한 장치들에 미치는 영향력에 대한 부분들이 논의되었다.

• 한국추진공학회지
• /
• 제15권1호
• /
• pp.1-10
• /
• 2011

가스연소와 촉매연소 실험을 통해 열교환 연소기의 연소 및 소염한계에 대하여 레이놀즈 수에 적용하여 성능평가를 수행하였으며, 마이크로 스케일 연소 장치에 대한 적용 가능성에 대해 살펴보았다. 본 논문에서는 연소기의 특성을 살펴보기 위해 나선형 연소기의 물리적 크기와 회전수를 변화시킨 스위스롤 연소기를 제작하여 실험을 수행하였다. 또한 연소가스 분석을 통한 연소효율에 대해서도 살펴보았다. 실험 결과를 바탕으로 스위스롤 연소기의 최적 작동상태에 대해서도 분석하였다.