• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.1 s.15
• /
• pp.111-120
• /
• 2000

A cadastral map that is base map on Land Information System is divided by two categories, graphical and digital cadastre. And digital cadastre can be displayed with location coordinates of nodes that depict parcel boundary on digital cadastral records. The transformation of digital cadastral records means that imported text data of node coordinate would be transformed into system data. This study was implemented to search reasons of errors resulted from transformation of graphic data and then to analyze the accuracy in terms of Position and area. For this, checking of software used in Geo-Spatial Information System was implemented at first and it was found that the accuracy is up by using double precision in coordinate transformation. On the position accuracy the errors at nodes was erased during making topology and the errors did not effect other nodes. On the area may the area errors because of being in error limit of allowable area had no problems in using of system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.185-189
• /
• 2006

Time series analysis is a frequently effective method of constructing model and prediction in data processing of deformation monitoring. The monitoring data sample must to be as more as possible and time intervals are equal roughly so as to construct time series model accurately and achieve reliable prediction. But in the project practice of GPS deformation monitoring, the monitoring data sample can't be obtained too much and time intervals are not equal because of being restricted by all kinds of factors, and it contains many variates in the deformation model moreover. It is very important to study the data processing method for small samples and multi-variates time series in GPS deformation monitoring. A new method of establishing small samples and multi-variates deformation model and prediction model are put forward so as to resolve contradiction of small samples and multi-variates encountered in constructing deformation model and improve formerly data processing method of deformation monitoring. Based on the system theory, a deformation body is regarded as a whole organism; a time-dependence linear system model and a time-dependence bilinear system model are established. The dynamic parameters estimation is derived by means of prediction fit and least information distribution criteria. The final example demonstrates the validity and practice of this method.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.12
• /
• pp.5-12
• /
• 2011

Macro- and micro-behaviors of soluble granular media during dissolution process is investigated by numerical analysis. Soluble media are represented by assemblies of non-soluble particles and soluble particles with the different soluble particles contents. Dissolutions of particles are implemented by reducing sizes of soluble particles. The numerical simulations results exhibit that the vertical displacements increase to certain times and become constant while the porosities still increase until no soluble particles are present. However, the porosities and vertical displacements increase with the increase of soluble particles content. The microscopic views show that the fabrics of media change during dissolution process until the certain times, the higher soluble particles contents, and the larger change in fabric.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.3
• /
• pp.1-10
• /
• 2022

With the development of web technology, large amounts of web documents are being produced. This web document contains various spatial texts, and by converting these texts into spatial information, it is the basis for searching for text documents with spatial query. These spatial texts consist of a wide range of areas, including postal codes and local phone numbers, as well as administrative place names and POI names. This paper presents algorithms that can map locations based on spatial text information existing within web documents. Through these algorithms, web documents can be searched for documents describing the region on a map rather than a general web search. In this paper, we demonstrated the presented algorithms are useful by implementing a web geo-text query system.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.9
• /
• pp.289-304
• /
• 2022

It is necessary to apply process algebra and logic in order to analyze and verify safety requirements for Smart IoT Systems due to distributivity and mobility of the systems over some predefined geo-temporal space. However the analysis and verification cannot be fully intuitive over the space due to the fact that the existing process algebra and logic are very limited to express the distributivity and the mobility. In order to overcome the limitations, the paper presents a new logic, namely for GTS-VL (Geo-Temporal Space-Visual Logic), visualization of the analysis and verification over the space. GTS-VL is the first order logic that deals with relations among the different types of blocks over the space, which is the graph that visualizes the system behaviors specified with the existing dTP-Calculus. A tool, called SAVE, was developed over the ADOxx Meta-Modeling Platform in order to demonstrate the feasibility of the approach, and the advantages and practicality of the approach was shown with the comparative analysis of PBC (Producer-Buffer-Consumer) example between the graphical analysis and verification method over the textual method with SAVE tool.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.7
• /
• pp.13-23
• /
• 2008

In this study, the centrifuge tests and numerical analyses were performed to investigate the lateral flow behavior and stability of abutment when high filling was applied on the soft ground improved by SCP. The centrifuge model tests and numerical analyses were fulfilled in the case of the back of abutment filled by EPS (case 1) and soil (case 2), and the potentiometer was installed on the abutment and fill to measure the vertical and horizontal displacement at the top of abutment. As a result of the centrifugal tests, the horizontal displacement of abutment in the case 1 was 1.4cm that is almost coincide with the results of numerical and satisfy the allowable standard. On the other hand, the horizontal displacement of abutment in the case 2 was 12 cm that is 18% greater than that of numerical analysis and exceed the allowable standard. As a result of analysis, the maximum horizontal displacement of pile was 1.26 cm in case 1 that satisfies the criterion of allowable horizontal displacement (1.5 cm). In contrast, the maximum horizontal displacement of pile was 1.005 m in case 2 that greatly exceeds the allowable horizontal displacement.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.91-103
• /
• 2021

In order to estimate the vertical and horizontal structural in the Yangsan fault core line (Naengsuri area, Pohang), we carried out gravity field measurements and interpretation procedures such as Euler deconvolution method and curvature analysis in addition to the forward modelling technique (i.e. IGMAS+). We found a prominent gravity difference of more than 1.5 mGal across the fault core. This indicates a distinct density difference between the western and eastern crustal area across the Yangsan fault line. Comparing this gravity field interpretation with other existent geologic and geophysical survey data (e.g. LiDAR, trenching, electric resistivity measurements), It is concluded that (1) the prominent gravity difference is caused by the density difference of about 0.1 g/㎤ between the Bulguksa Granite in the west and the Cretaceous Sandstone in the east side, (2) the fault core is elongated vertically into a depth of about 2,000 meters and extended horizontally 3,000 meters to the NNE direction from Naengsuri area. Our results present that the gravity field method is a very effective tool to estimate a three -dimensional image of the active fault core.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.2
• /
• pp.19-27
• /
• 2007

In this study, the centrifugal tests were performed with varying the angle of slope such as 1:3, 1:2.5, and 1:2 in order to analyze the deformation and failure type of dredged clay slope for a short term. The displacement mode, displacement vector and the variation of pore pressure with the different slope angle were measured. As a results, even though the displacement in the slope after 4 months were developed in the case of 1:3 for the dredged slope, there are little problems to obtain the stability of dredged slope because the original construction section maintains. Also, in the case of 1:2.5 after 4 months the local slope failure occurred and in the case of 1:2 after 2 months the circle failure starting from the point of the tensile crack occurred. After reviewing the results, the maximum vertical displacement occurred at the crest of slope and maximum horizontal displacement was about double of maximum vertical displacement.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.2
• /
• pp.31-37
• /
• 2008

Diffused Aeration System (DAS) is one of the remediation methods used for removing contaminants in groundwater and this method brings air bubbles in contact with contaminated water, afterwards transferring contaminants in liquid phase into air phase. In this study, three applicability tests using DAS were conducted in two highly contaminated sites. For these tests, diffused air bubbles are generated with a in-flow rate of 17.1, 44.8 and 76.5 (1/min), respectively. The concentrations of TCE in grounwater and air phase were measured during the tests. The measured results showed that TCE concentration hit the highest value after 6~8 min and afterwards decreased gradually. Also, it was observed that the TCE concentration in air phase changed depending on the rate of diffused aeration. In addition, $K_La$ values from liquid to air phase were calculated based on the test results and those of three tests (test 1, 2 3) were 0.444, 1.158 and 1.836(1/hr), respectively. From the comparison of $K_La$ values, the faster air in-flow rate is, the higher the efficiency of the DAS is.

• Journal of applied mathematics & informatics
• /
• v.12 no.1_2
• /
• pp.291-297
• /
• 2003

This paper considers discrete-time two-class Ge $o^{X/}$G/1 queues with preemptive repeat priority. Service times of messages of each priority class are i.i.d. according to a general discrete distribution function that may differ between two classes. Completion times are derived for the preemptive repeat identical and different priority disciplines. By using the completion time, the stability condition for our system is investigated.d.