• Journal of Astronomy and Space Sciences
• /
• v.21 no.3
• /
• pp.221-232
• /
• 2004

Gauss method for the initial orbit determination was tested using angle-only data obtained by orbit propagation using TLB and SGP4/SDP4 orbit propagation model.. As the analysis of this simulation, a feasible time span between observation time of satellite resulting the minimum error to the true orbit was found. Initial orbit determination is performed using observational data of GPS 26 and Koreasat 2 from 0.6m telescope of KAO(Korea Astronomy Observatory) and precise orbit determination is also performed using simulated data. The result of precise orbit determination shows that the accuracy of resulting orbit is related to the accuracy of the observations and the number of data.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.6
• /
• pp.387-396
• /
• 2010

A 3-D numeric model for the confined transient flow under sea ground have been developed. This is FDM model using Gauss-Seidel SOR (successive over-relaxation). This model shows the similar head distribution pattern to Theis analytic solution and MODFLOW simulation. The input flowrate to the aquifer and discharge of well have been compared. And it have been found that mass balance is influenced by the weight factor ${\alpha}$, i.e. fullyimplicit method (${\alpha}$=1) shows 5% error, but when ${\alpha}$ becomes to 0.5(Crank and Nicolson method) the mass balance becomes worse and the model result diverges. And the convergency of the model is not much different when $\lambda$ (over-relaxation factor)=0.8~1.5, but when $\lambda$>1.5, the model result diverges. The test-run shows that the well discharge becomes smaller when another well is near. This model can cover the isotropy$(Kx{\neq}Ky{\neq}Kz)$ and inhomogeneity, and can be used for the selection of well site, discharge calculation, and head prediction in case of the artificial recharge etc.

• Journal of the Korean Statistical Society
• /
• v.21 no.1
• /
• pp.59-69
• /
• 1992

A measure is proposed to represent the degree of residuals from the symmetry model for square contingency tables with nominal categories. The measure is derivedby modifying the sum of squared singular values for a skew symmetric matrix of the residuals from the symmetry model. The proposed measure would be useful for comparing the degree of residuals from the symmetry model in several tables.

• Journal of Korea Water Resources Association
• /
• v.30 no.5
• /
• pp.549-559
• /
• 1997

A multiply-connected network unsteady flow model for the main reach of the Han River is developed. It is a variable parameter model which allows variable roughness coefficient for each computational point according to the spatial position and the value of discharge. Sensitivities of the model to roughness coefficient and weir-flow discharge coefficient are tested, and as a result Manning's roughness coefficient is selected as the calibration parameter. The model is calibrated and verified using the records of the past flood events. A modified Gauss-Newton method is used for the optimal calibration of roughness coefficients. From the calibration of variable parameter model, spatial variation and discharge dependence of Manning's roughness coefficient are identified. That is, the roughness coefficient is higher for the upstream reach of the Wangsook stream Junction, and it decreases as the discharge increases. It turns out through the verification that the stages calculated by the variable parameter model agree better with the observed than those by the conventional single parameter model. Spatial variation of the roughness coefficient appears to be more significant than the dependence of the discharge.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.216-218
• /
• 2009

This paper proposes an image processing algorithm to stabilize shaken scenes of UAV(Unmanned Aerial Vehicle) caused by vehicle self-vibration and aerodynamic disturbance. The proposed method stabilizes images by compensating estimated shake motion which is evaluated from global motion. The global motion between two continuous images modeled by 6 parameter warping model is estimated by non-linear square method based on Gauss-Newton algorithm with excluding outlier region. The shake motion is evaluated by subtracting the global motion from aerial vehicle motion obtained by averaging global motion. Experimental results show that the proposed method stabilize shaken scenes effectively.

• Proceedings of the Korean Statistical Society Conference
• /
• 2003.05a
• /
• pp.79-84
• /
• 2003

Likelihood estimation in random-effect models is often complicated because the marginal likelihood involves an analytically intractable integral. Numerical integration such as Gauss-Hermite quadrature is an option, but is generally not recommended when the dimensionality of the integral is high. An alternative is the use of hierarchical likelihood, which avoids such burdensome numerical integration. These two approaches for fitting binary data are compared and the advantages of using the hierarchical likelihood are discussed. Random-effect models for binary outcomes and for bivariate binary-continuous outcomes are considered.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.464-466
• /
• 1998

경계선 검출은 시각 인식 또는 기계 시각 인식의 과정에서 제일 먼저 수행되는 전처리 단계이다. 경계선 검출은 컴퓨터 시각 인식성능에 매우 중대한 요인으로 작용한다. 최근 MPEG-4에서 Model Based Coding 기법이 채택되면서, 경계선 검출 및 이를 이용한 컴퓨터 시각 인식의 중요성은 날로 커지고 있다. 한편, 잡음이 있는 영상의 경계선 검출 방법으로 여러 가지가 제시되었는데, 특히 잡음의 종류가 Additive White Gaussian인 경우에는 Canny Edge Detector가, Impulse인 경우에는 Dual Stack Filter를 적용한 방법이 각각 높은 성능으로 인정을 받고 있다. 그러나 Canny Edge Detector의 경우, Canny는 이론적인 Optimal Filter를 구하는 데에 성공하였지만 실제 적용에는, 이 Optimal Filter의 근사로써 Gauss함수의 1계 도함수를 사용하였다. 본 연구에서는 Gauss함수보다는 상당히 Optimal Filter와 가까운 Filter를 얻기 위하여 웨이블릿 변환을 사용한 Liao등의 방법과, 각기 다른 Scale에서의 웨이블릿 변환들이 가지는 잡음과의 관계를 고려한 새로운 경계선 검출방법을 개발하였다. 실험결과, 본 연구에서의 방법은 기존에 사용되던 Canny Edge Detector나 Stochastic Operator보다 뛰어난 성능을 보여주었다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.2
• /
• pp.81-87
• /
• 2004

This paper deals with a new approach to tolerance optimization problems. Optimal tolerance allotment problems can be formulated as stochastic optimization problems. Most schemes to solve the stochastic optimization problems have been found to exhibit difficulties in multivariate integration of the probability density function. As a typical example of stochastic optimization the optimal tolerance allotment problem has the same difficulties. In this stochastic model, manufacturing system is represented by Gauss-Markov stochastic process and the manufacturing unit availability is characterized for realistic optimization modeling. The new algorithm performed robustly for a large deviation approximation. A significant reduction in computation time was observed compared to the results obtained in previous studies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.399-402
• /
• 1999

In this paper, a new method for calculating capacitance in arbitrarily shape structure is Presented. This new approach based on divergence theorem of Gauss\`s law is acheive by Surface-Contacted Element(SCE) for Gaussian surface. To evaluate accurate capacitance value in nonuniform electric field. in two dimensional analysis the interpolation using the elements which contact one nod (PE: Point-Element) or two nod (FE: Face-Element) is employed. Because the elements contacted with surface are very small compared with total elements in analytic model, SCE method has shorter computing time to calculate capacitance. This proposed method is verified by comparing the simulated results with value obtained by analytic method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.1
• /
• pp.18-24
• /
• 1984

Calculation of error probabilities for a coherent phase-shilft keyed communication system operating in a transionospheric scintillation channel is accomplished by means of the Gauss-quadrature integration formula. The channel model used, patterned after Rino's work, is slowly flat fading wherein the envelope of the received signal is modeled as the envelope of correlated Gaussian quadrature random processes. The error probability for the scintillation channel is calculated using actual ionospheric scintillation data for transmission in the UHF region(30-300MHz).