• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권6호
• /
• pp.421-430
• /
• 2000

This paper describes an optimal design method which is applied a weighted least square (WLS) method for Magnetic Resonance Imaging (MRI) system. An optimal design approach is presented for a homogeneity superconducting magnet with the superconducting active shield especially for a magnetic resonance imaging system. The WLS is used to obtain the optimal configurations using the least amount and minimum volume of conductor, exhibiting the smallest level of field inhomogeneity and resulting in the least level of stray field. The proposed model is used to design a multiple-shield configuration for a 1.5 T MRI magnet. The field homogeneity is required less than 5 gauss stray field contour within 4m axially and 3m radially from origin. The designed magnet with the actively magnetic shielding coil out of main coils is analyzed by FEM and theoretical analysis method, investigated the field homogeneity.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권7호
• /
• pp.365-368
• /
• 2000

Traditionally, load flows have been calculated using the Gauss-Seidel and Newton-Raphson Method. DistFlow Method which is proposed by Wu and Baran is superior to the other two methods because it does not require the admittance matrix calculation to optimize the distribution system. This paper introduces a new alternative algorithm to the DistFlow Method which is slow and complex to find solutions as the number of lateral and sublateral increases. The proposed load flow method can construct System Jacobian easily. We can minimize the off-diagonal elements of the branch Jacobian and submatrices in the System Jacobian. Simulation results show that progressive performances of the proposed algorithm have a better convergence time.

• 전산구조공학
• /
• 제10권2호
• /
• pp.139-148
• /
• 1997

A finite element method is programmed to analyse the nonlinear behavior of axisymmetric structures. The lst order Mindlin shell theory which takes into account the transversal shear deformation is used to formulate a conical two node element with six degrees of freedom. To evade the shear locking phenomenon which arises in Mindlin type element when the effect of shear deformation tends to zero, the reduced integration of one point Gauss Quadrature at the center of element is employed. This method is the Updated Lagrangian formulation which refers the variables to the state of the most recent iteration. The solution is searched by Newton-Raphson iteration method. The tangent matrix of this method is obtained by a finite difference method by perturbating the degrees of freedom with small values. For the moment this program is limited to the analyses of non-linear elastic problems. For structures which could have elastic stability problem, the calculation is controled by displacement.

• Journal of applied mathematics & informatics
• /
• 제29권5_6호
• /
• pp.1257-1268
• /
• 2011

The thermal behavior of wood exposed to the outdoors is influenced by solar absorptivity and longwave emissivity. However, it is difficult to measure that properties directly. Hence we estimate the values of the parameter by using the least-square optimization technique. Finally we report the results for the computation of the values of the parameters.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.913_914
• /
• 2009

태양광, 풍력, 연료전지 등 신재생에너지가 분산전원으로 계통에 연계될 경우 정확한 위상각 검출과 함께 전압 및 주파수 변화에 따른 빠른 응답성이 요구된다. 본 논문에서는 개선된 Gauss-Seidal Relaxation 방식을 사용하여 수ms 이내에 정확한 위상각을 검출하는 알고리즘을 제안하고 시뮬레이션을 통해 타당성을 검증하였다.

• Tribology and Lubricants
• /
• 제5권2호
• /
• pp.48-54
• /
• 1989

The effects of angular misalignment, coning and the temperature difference between the primary seal ring and the seal seat on the pressure distribution in mechanical face seals are analyzed. The modified Reynolds equation for the temperature dependent viscosity was solved by a finite difference approximation and Gauss-Seidel method. It is shown that the amplitude of pressure is significantly affected by the misalignment of the seals and a large temperature difference between the rotor and the stator.

• 대한수학회지
• /
• 제53권1호
• /
• pp.147-159
• /
• 2016

In this paper, subordination results of analytic function $f{\in}{\mathcal{A}}_p$ involving linear operator ${\mathcal{K}}^{{\delta},{\lambda}}_{c,p}$ are obtained. By applying the differential subordination method, results are derived under some sufficient subordination conditions. On using some hypergeometric identities, corollaries of the main results are derived. Furthermore, convolution preserving properties for a class of multivalent analytic function associated with the operator ${\mathcal{K}}^{{\delta},{\lambda}}_{c,p}$ are investigated.

• 대한수학회보
• /
• 제49권5호
• /
• pp.1081-1088
• /
• 2012

We shall prove the universality of the curvature identity for the 4-dimensional Riemannian manifold using a different method than that used by Gilkey, Park, and Sekigawa [5].

• 대한전기학회논문지
• /
• 제39권4호
• /
• pp.380-385
• /
• 1990

This Paper presents a general algorithm for the parameter estimation of an antoregressive moving average process observed in additive white noise. The algorithm is based on the Gauss-Newton recursive prediction error method. For the parameter estimation, the output measurement is modelled as an innovation process using the spectral factorization, so that noise free RPE ARMA estimation can be used. Using apriori known properties leads to algorithm with smaller computation and better accuracy be the parsimony principle. Computer simulation examples show the effectiveness of the proposed algorithm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 추계학술대회 논문집
• /
• pp.128-130
• /
• 1993

This paper presents the discharge characteristics of FTS system under verious discharge condition. E1ectron temperature and electron density are studied by double probe method. The Characteristics of discharge occurrence vol-tage and discharge current are significantly affected by magnetic flux density. And the best TiN thin film is obtained at 700[Vl, 400[gauss] and 1.0[mtorr].