We investigated the effects of SiH$_4$ gas on the surface of Hf-silicate films during the deposition of polycrystalline (poly) Si films and the thermal stability of sputtered Hf-silicate films in poly Si/Hf-silicate structure by using High Resolution Transmission Electron Microscopy (HR-TEM) and X-ray Photoelectron Spectroscopy (XPS). Hf-silicate films were deposited by using DC-mag-netron sputtering with Hf target and Si target and poly Si films were deposited at 600$^{\circ}C$ by using Low Pressure Chemical Vapor Deposition (LPCVD) with SiH$_4$ gas. After poly Si film deposition at 600$^{\circ}C$, Hf silicide layer was observed between poly Si and Hf-silicate films due to the reaction between active SiH$_4$ gas and Hf-silicate films. After annealing at 900$^{\circ}C$, Hf silicide, formed during the deposition of poly Si, changed to Hf-silicate and the phase separation of the silicate was not observed. In addition, the Hf-silicate films remain amorphous phase.
집적 쇼트키 논리 게이트에서 전압 스윙을 크게 하기 위해서 백금 실리사이드 쇼트키 접합의 전기직 특성을 분석하였고, 이 접합에서 프로그램으로 특성을 시뮬레이션 하였다. 분석특성 특성을 위한 시뮬레이션 프로그램은 제조 공정용 SUPREM V와 모델링용 Matlab, 소자 구조용의 Medichi 툴이다. 시뮬레이션 특성을 위한 입력 파라미터는 소자 제작 공정의 공정 단계와 동일한 조건으로 하였다. 분석적인 전기적인 특성들은 순방향 바이어스에서 턴-온 전압, 포화 전류, 이상인자이고, 역방향 바이어스에서 항복 전압을 실제 특성과 시뮬레이션 특성 사이의 결과를 보였다. 결과로써 순방향 턴-온 전압, 역방향 항복전압, 장벽 높이는 기판의 증가된 농도의 변화에 따라 감소되었지만, 포화전류와 이상인자는 증가되었다.
$SiO_2$ and polycrystalline Si layers were sequentially grown on (100) Si. NiSi was formed on this substrate from a 20nm Ni layer or a 20nm Ni/5nm Ti bilayer by rapid thermal annealing (RTA) at $300~500^{\circ}C$ to compare thermal stability. In addition, MOS capacitors were fabricated by depositing a 20nm Ni layer on the Poly-Si/$SiO_2$substrate, RTA at $400^{\circ}C$ to form NiSi, $BF_2$ or As implantation and finally drive- in annealing at $500~800^{\circ}C$ to evaluate electrical characteristics. When annealed at $400^{\circ}C$, NiSi made from both a Ni monolayer and a Ni/Ti bilayer showed excellent thermal stability. But NiSi made from a Ni/Ti bilayer was thermally unstable at $500^{\circ}C$. This was attributed to the formation of insignificantly small amount of NiSi due to suppressed Ni diffusion through the Ti layer. PMOS and NMOS capacitors made by using a Ni monolayer and the SADS(silicide as a dopant source) method showed good C-V characteristics, when drive-in annealed at $500^{\circ}C$ for 20sec., and$ 600^{\circ}C$ for 80sec. respectively.
기존 MOS (Metal-Oxide-Semiconductor) 소자의 게이트 산화막으로 사용된 $Er_2O_3/SiO_2$ 더블레이어 층은 낮은 누설전류와 높은 캐패시턴스를 갖는 장점을 가지고 있다. 본 논문에서는 이 더블레이어 층을 비휘발성 메모리 소자의 전하포획층으로 처음 적용하여 우수한 성능의 메모리 특성을 얻을 수 있었다. 소자를 제작하기 전에 EDISON Nanophysics 시뮬레이션을 통해 낮은 누설 전류값과 높은 캐패시턴스 값을 기준으로 하여 산화막 두께를 최적화하였다. 이 후, 최적화된 조건으로 금속실리사이드 소스/드레인, 10 um/ 10um의 채널 넓이/길이를 갖는 비휘발성 메모리 소자를 제작하였다. 그 결과, 11 V, 50 ms의 프로그램 특성, -11 V, 500 ms의 소거 특성 및 10년의 기억유지 특성, $10^4$의 내구성 특성을 얻을 수 있었다.
We report the structural and electrical properties of hafnium oxide (HfO$_2$) films with tungsten silicide (WSi$_2$) metal gate. In this study, HfO$_2$thin films were fabricated by oxidation of sputtered Hf metal films on Si, and WSi$_2$was deposited directly on HfO$_2$by LPCVD. The hysteresis windows in C-V curves of the WSi$_2$HfO$_2$/Si MOS capacitors were negligible (<20 mV), and had no dependence on frequency from 10 kHz to 1 MHz and bias ramp rate from 10 mV to 1 V. In addition, leakage current was very low in the range of 10$^{-9}$ ~10$^{-10}$ A to ~ 1 V, which was due to the formation of interfacial hafnium silicate layer between HfO$_2$and Si. After PMA (post metallization annealing) of the WSi$_2$/HfO$_2$/Si MOS capacitors at 500 $^{\circ}C$ EOT (equivalent oxide thickness) was reduced from 26 to 22 $\AA$ and the leakage current was reduced by approximately one order as compared to that measured before annealing. These results indicate that the effect of fluorine diffusion is negligible and annealing minimizes the etching damage.
최근 셀리사이드(salicide) 제조시 $COSiO_2$의 에피텍셜 성장을 돕기 위하여 Ti층을 삽 입한 Co/Ti/Si 이중층 구조의 실리사이드화가 관심을 끌고 있다. Co/Ti 이중층을 이용한 salicide 트랜지스터가 성공적으로 만들어지기 위해서는 gate 주위의 spacer oxide위에 증착 된 Co/Ti 이중층을 급속열처리할 때 Co/Ti와 $SiO_2$간의 계면에서의 상호반응에 대하여 조사 하였다. Co/Ti 이중층은 $600^{\circ}C$에서 열처리한 후 면저항이 급격하게 증가하기 시작하였는데, 이것은 Co층이 $SiO_2$와의 계면에너지를 줄이기 위하여 응집되기 때문이다. 이때 Co/Ti의 열 처리후 Ti에 의하여 $SiO_2$기판의 일부가 분해됨으로써 절연체의 Ti산화물이 형성되었으나, 이외의 도전성 반응부산물은 발견되지 않았다.
CMOS 축소화가 32nm node를 넘어서 지속적으로 진행되기 위하여 FinFET, Surround Gate and Tri-Gate와 같은 Fully Depleted 3-Dimensional 소자들이 SCE를 다루기 위해서 많이 제안되어 왔다. 하지만 소자의 축소화를 진행함에 있어서 좁고 균일한 patterning을 형성하는 것과 동시에 낮은 Extension Region과 Contact Region에서의 Series Resistance을 제공하여야 하고 Source/Drain Contact Formation을 확보하여야 한다. 그리고 소자의 축소화가 진행됨으로써 Silicide의 응집현상과 Source/Drain Junction의 누설전류에 대한 허용범위가 점점 엄격해지고 있다. ITRS 2005에 따르면 32nm CMOS에서는 Contact Resistivity가 대략 $2{\times}10-8{\Omega}cm2$이 요구되고 있다. 또한 Three Dimensional 소자에서는 Fin Corner Effect가 Channel Region뿐만 아니라 S/D Region에서도 중대한 영향을 미치게 된다. 따라서 본 논문에서 제시하는 Novel S/D Contact Formation 기술을 이용하여 Self-Aligned Dual/Single Metal Contact을 이루어Patterning에 대한 문제점 해결과 축소화에 따라 증가하는 Contact Resistivity 문제점을 해결책을 제시하고자 한다. 이를 검증하기3D MOSFET제작하고 본 기술을 적용하고 검증한다. 또한 Normal Doping 구조를 가진3D MOSFET뿐만 아니라 SCE를 해결하기 위해서 대안으로 제시되고 있는 SB-MOSFET을 3D 구조로 제작하고, 이 기술을 적용하여 검증한다. 그리고 Silvaco simulation tool을 이용하여 S/D에 Metal이 Contact을 이루는 구조가 Double type과 Triple type에 따라 Contact Resistivity에 미치는 영향을 미리 확인하였고 이를 실험으로 검증하여 소자의 축소화에 따라 대두되는 문제점들의 해결책을 제시하고자 한다.
쇼트키 장벽 관통 트랜지스터에 실리콘 나노점을 부유 게이트로 사용하는 비휘발성 메모리 소자를 제작하였다. 소스/드레인 영역에 어븀 실리사이드를 형성하여 쇼트키 장벽을 생성하였으며, 디지털 가스 주입의 저압 화학 기상 증착법으로 실리콘 나노점을 형성하여 부유 게이트로 이용하였다. 쇼트키 장벽 관통 트랜지스터의 동작 상태를 확인하였으며, 게이트 전압의 크기 및 걸어준 시간에 따른 트랜지스터의 문턱전압의 이동을 관찰함으로써 비휘발성 메모리 특성을 측정하였다. 초기 ${\pm}20\;V$의 쓰기/지우기 동작에 따른 메모리 창의 크기는 ${\sim}5\;V$ 이었으며, 나노점에 충분한 전하 충전을 위한 동작 시간은 10/50 msec 이었다. 그러나 메모리 창의 크기는 일정 시간이 지난 후에 0.4 V로 감소하였다. 이러한 메모리 창의 감소 원인을 어븀 확산에 따른 결과로 설명하였다. 본 메모리 소자는 비교적 안정한 쓰기/지우기 내구성을 보여주었으나, 지속적인 쓰기/지우기 동작에 따라 수 V의 문턱전압 이동과 메모리 창의 감소를 보여주었다. 본 실험 결과를 가지고 실리콘 나노점 부유게이트가 쇼트키 장벽 트랜지스터 구조에 접목 가능하여 초미세 비휘발성 메모리 소자로 개발 가능함을 확인하였다.
We simulated and analyzed the flicker phenomena in the poly-Si TFT-LCD using PSpice for the development of wide-area and high-quality LCD display We define the electric quantity of flicker in the TFT-LCD, which is the ratio of half frame frequency (30Hz) to DC (0 Hz) frequency. We compared two different types of TFTs, excimer laser annealed (ELA) poly-Si TFT and silicide mediated crystallization (SMC) poly-Si TFT, and found that the ELA and SMC TFTs show different flicker characteristics because of their mobility and leakage current. In addition, we showed that the gate voltage should be chosen carefully at the minimum flicker because of the larger leakage current of poly-Si Tn as compared with a-Si TFT
Polycrystalline silicon (poly-Si) Schottky barrier thin film transistors (SB-TFT) are fabricated by erbium silicided source/drain for n-type SB-TFT. High quality poly-Si film were obtained by crystallizing the amorphous Si film with excimer laser annealing (ELA) or solid phase crystallization (SPC) method. The fabricated poly-Si SB-TFTs have a large on/off current ratio with a low leakage current. Moreover, the electrical characteristics of poly-Si SB TFTs are significantly improved by the additional forming gas annealing in 2 % $H_2/N_2$, because the interface trap states at the poly-Si grain boundaries and at the gate oxide/poly-Si channel decreased.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.