• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.1 s.34
• /
• pp.21-26
• /
• 2005

The field effect transistors (FETs) were fabricated ell $Y_2O_3/Si(100)$ substrates by the conventional memory processes and sol-gel process using $(Bi,La)Ti_3O_{12}(BLT)$ ferroelectric gate materials. The remnant polarization ($2Pr = Pr^+-Pr^-$) int Pt/BLT/Pt/Si capacitors increased from $22 {\mu}C/cm^2$ to $30{\mu}C/ cm^2$ at 5V as the annealing temperature increased from $700^{\circ}C$ to $750^{\circ}C$. There was no drastic degradation in the polarization values after applying the retention read pulse for $10^{5.5}$ seconds. The capacitance-voltage data of $Pt/BLT/Y_2O_3/Si$ capacitors at 5V input voltage showed that the memory window voltage decreased from 1.4V to 0.6V as the annealing temperature increased from $700^{\circ}C$ to $750^{\circ}C$. The leakage current of the $Pt/BLT/Y_2O_3/Si$ capacitors annealed at $750^{\circ}C$ was about $510^{-8}A/cm^2$ at 5V. From the drain currents versus gate voltages ($V_G$) for $Pt/BLT/Y_2O_3/Si(100)$ FET devices, the memory window voltages increased from 0.3V to 0.8V with increasing tile $V_G$ from 3V to 5V.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.713-716
• /
• 2013

The device performances of N-channel Tunneling FET have been characterized with different intrinsic length between drain and gate($L_{in}$), drain and source doping, permittivity and oxide thickness when the total effective channel length is constant. N-channel Tunneling FET of SOI structure have been used in characterization. $L_{in}$ was from 30nm to 70nm, dose concentration of drain and source were from $2{\times}10^{12}cm^{-2}$ to $2{\times}10^{15}cm^{-2}$ and from $1{\times}10^{14}cm^{-2}$ to $3{\times}10^{15}cm^{-2}$, permittivity was from 3.9 to 29, and oxide thickness was from 3nm to 9nm. The device performances were characterized by Subthreshold slope(S-slope), On/off ratio, and leakage current. From the simulation results, the leakage current have been reduced for long $L_{in}$ and low drain doping. S-slope have been reduced for high source doping, high permittivity and thin oxide thickness. With considering the leakage current and S-slope, it is desirable that are long $L_{in}$, low drain doping, high source doping, high permittivity and thin oxide thickness to optimize device performance in n-channel Tunneling FET.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.406-406
• /
• 2010

일반적으로, 나노스케일의 MOS 소자에서는 게이트 절연체 두께가 감소함에 따라 tunneling effect의 증가로 인해 PID (plasma induced damage)로 인한 소자 특성 저하 현상을 감소하는 추세로 알려져 있다. 하지만 요즘 많이 사용되고 있는 high-k 게이트 절연체의 경우에는 오히려 더 많은 charge들이 trapping 되면서 PID가 오히려 더 심각해지는 현상이 나타나고 있다. 이러한 high-k 게이트 식각 시 현재는 주로 Hf-based wet etch나 dry etch가 사용되고 있지만 gate edge 영역에서 high-k 게이트 절연체의 undercut 현상이나 PID에 의한 소자특성 저하가 보고되고 있다. 본 연구에서는 이에 차세대 MOS 소자의 gate stack 구조중 issue화 되고 있는 metal gate 층과 gate dielectric 층의 식각공정에 각각 중성빔 식각과 중성빔 원자층 식각을 적용하여 전기적 손상 없이 원자레벨의 정확한 식각 조절을 해줄 수 있는 새로운 two step 식각 공정에 대한 연구를 진행하였다. 먼저 TiN metal gate 층의 식각을 위해 HBr과 $Cl_2$ 혼합가스를 사용한 중성빔 식각기술을 적용하여 100 eV 이하의 에너지 조건에서 하부층인 $HfO_2$와 거의 무한대의 식각 선택비를 얻었다. 하지만 100 eV 조건에서는 낮은 에너지에 의한 빔 스케터링으로 실제 패턴 식각시 etch foot이 발생되는 현상이 관찰되었으며, 이를 해결하기 위하여 먼저 높은 에너지로 식각을 진행하고 $HfO_2$와의 계면 근처에서 100 eV로 식각을 해주는 two step 방법을 사용하였다. 그 결과 anistropic 하고 하부층에 etch stop된 식각 형상을 관찰할 수 있었다. 다음으로 3.5nm의 매우 얇은 $HfO_2$ gate dielectric 층의 정확한 식각 깊이 조절을 위해 $BCl_3$와 Ar 가스를 이용한 중성빔 원자층 식각기술을 적용하여 $1.2\;{\AA}$/cycle의 단일막 식각 조건을 확립하고 약 30 cycle 공정시 3.5nm 두께의 $HfO_2$ 층이 완벽히 제거됨을 관찰할 수 있었다. 뿐만 아니라, vertical 한 식각 형상 및 향상된 표면 roughness를 transmission electron microscope(TEM)과 atomic force microscope (AFM)으로 관찰할 수 있었다. 이러한 중성빔 식각과 중성빔 원자층 식각기술이 결합된 새로운 gate recess 공정을 실제 MOSFET 소자에 적용하여 기존 식각 방법으로 제작된 소자 결과를 비교해 본 결과 gate leakage current가 약 one order 정도 개선되었음을 확인할 수 있었다.

• Journal of Korean Vacuum Science & Technology
• /
• v.4 no.1
• /
• pp.6-10
• /
• 2000

Ferroelectric YMnO$_3$ thin films were deposited on $Y_2$O$_3$/si(100) substrates by metalorganic chemical vapor deposition. The YMnO$_3$ thin films annealed in vacuum ambient (100 mTorr) above 75$0^{\circ}C$ show hexagonal structured YMnO$_3$. However, the film annealed in oxygen ambient shows poor crystallinity, and the second phase as $Y_2$O$_3$ and orthorhombic-YMnO$_3$ were shown. The annealing ambient and pressure on the crystallinity of YMnO$_3$ thin films is very important. The C-V characteristics have a hysteresis curve with a clockwise rotation, which indicates ferroelectric polarization switching behavior. When the gate voltage sweeps from +5 to 5 V, the memory window of the Pt/YMnO$_3$/Y$_2$O$_3$/Si gate capacitor annealed at 85$0^{\circ}C$ is 1.8 V. The typical leakage current densities of the films annealed in oxygen and vacuum ambient are about 10$^{-3}$ and 10$^{-7}$ A/cm$^2$ at applied voltage of 5 V.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.58-61
• /
• 2001

Metal-insulator-semiconductor (MIS) C-V properties with high dielectric AIN thin films showed no hysteresis and good interface properties. The dielectric constant of the AIN film calculated from the capacitance at the accumulation region in the capacitance-voltage(C-V) characteristics was about 8. The C-V characteristics of MFIS capacitor showed a hysteresis loop due to the ferroelectric nature of the LiNbO$_3$ thin films. Typical dielectric constant value of LiNbO$_3$ film of MFIS device was about 23. The memory window width was about 1.2V at the gate voltage of $\pm$5 V ranges. Typical gate leakage current density of the MFIS structure was the order of 10$^{-9}$ A/cm$^2$ at the range of within $\pm$500 kV/cm. The ferroelectric capacitors showed no polarization degradation up to about 10$^{11}$ switching cycles when subjected to symmetric bipolar voltage pulse(peak-to-peak 8V, 50% duty cycle) in the 500kHz.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.10
• /
• pp.831-837
• /
• 2002

Scaled SONOS transistors have been fabricated by 0.35$\mu\textrm{m}$ CMOS standard logic process. The thickness of stacked ONO(blocking oxide, memory nitride, tunnel oxide) gate insulators measured by TEM are 2.5 nm, 4.0 nm and 2.4 nm, respectively. The SONOS memories have shown low programming voltages of ${\pm}$8.5 V and long-term retention of 10-year Even after 2 ${\times}$ 10$\^$5/ program/erase cycles, the leakage current of unselected transistor in the erased state was low enough that there was no error in read operation and we could distinguish the programmed state from the erased states precisely The tight distribution of the threshold voltages in the programmed and the erased states could remove complex verifying process caused by over-erase in floating gate flash memory, which is one of the main advantages of the charge-trap type devices. A single power supply operation of 3 V and a high endurance of 1${\times}$10$\^$6/ cycles can be realized by the programming method for a flash-erased type EEPROM.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.114-114
• /
• 2012

Metal-oxide-semiconductor field-effect transistors (MOSFETs)의 critical dimension (CD)가 sub 45 nm로 줄어듬에 따라 기존에 gate dielectric으로 사용하고 있는 SiO2에서 발생되는 high gate leakage current 때문에 새로운 high dielectric constant (k) 물질들이 연구되기 시작하였다. 여러 가지 high-k 물질 중에서, aluminum-oxide (Al2O3)는 높은 dielectric constant (~10)와 전자 터널링 barrier height (~2eV) 등을 가지기 때문에 많은 연구가 되고 있다. 그러나 Al2O3를 anisotropic한 patterning을 하기 위해 주로 사용되고 있는 halogen-based 플라즈마 식각 과정에서 나타나는 Al2O3와 하부 layer간의 낮은 식각 selectivity 뿐만 아니라 표면에 발생되는 defect, stoichiometry modification, roughness 변화 등의 많은 문제점들로 인하여 device performance가 감소하기 때문에 이를 해결하기 위한 많은 연구들이 진행중이다. 따라서 본 연구에서는 실리콘 기판위의 atomic layer deposition (ALD)로 증착된 Al2O3를 BCl3/Ar 중성빔을 이용하여 원자층 식각한 후 식각 특성을 분석해 보았다. Al2O3 표면을 BCl3로 absorption시킨 후 Ar 중성빔으로 desorption 시키는 과정에서 volatile한 aluminum-chlorides와 boron oxychloride가 형성되어 layer by layer로 제거됨을 관찰 할 수 있었다.

• ETRI Journal
• /
• v.35 no.4
• /
• pp.734-737
• /
• 2013

Nonvolatile ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) memory based on an organic thin-film transistor with inkjet-printed dodecyl-substituted thienylenevinylene-thiophene copolymer (PC12TV12T) as the active layer is developed. The memory window is 4.5 V with a gate voltage sweep of -12.5 V to 12.5 V. The field effect mobility, on/off ratio, and gate leakage current are 0.1 $cm^2/Vs$, $10^5$, and $10^{-10}$ A, respectively. Although the retention behaviors should be improved and optimized, the obtained characteristics are very promising for future flexible electronics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.48-51
• /
• 2004

In this paper the importance of re-nitridation on a plasma-enhanced chemical-vapor deposited(PECVD) $SiO_2$ stacked on a thermally grown thin-nitrided $SiO_2$ on n-type 4H SiC have been investigated. Without the final re-nitridation process, the leakage current of metaloxidesemiconductor(MOS) was extremely large. It is believed that water and carbon, contamination from the low-thermal budget PECVD process, are the main factors that destroyed the high quality thin-buffer nitrided oxide. After re-nitridation annealing, the quality of the stacked gate oxide was improved. The reasons of this improvement are presented.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.7
• /
• pp.569-574
• /
• 2007

In this paper, the reliability (NBTI degradation: ${\Delta}V_{th}$) and device characteristic of nano-scale PMOSFET with plasma nitrided oxide (PNO) is characterized in depth by comparing those with thermally nitrided oxide (TNO). PNO case shows the reduction of gate leakage current and interface state density compared to TNO with no change of the $I_{D.sat}\;vs.\;I_{OFF}$ characteristics. Gate oxide capacitance (Cox) of PNO is larger than TNO and it increases as the N concentration increases in PNO. PNO also shows the improvement of NBTI characteristics because the nitrogen peak layer is located near the $Poly/SiO_2$ interface. However, if the nitrogen concentration in PNO oxide increases, threshold voltage degradation $({\Delta}V_{th})$ becomes more degraded by NBT stress due to the enhanced generation of the fixed oxide charges.