• Journal of Magnetics
• /
• 제15권4호
• /
• pp.179-184
• /
• 2010

We have investigated the effects of post annealing on iron oxide nanoparticles synthesized by the novel hydrothermal synthesis method with the $FeSO_4{\cdot}7H_2O$. To investigate the post annealing effect, the as-synthesized iron oxide nanoparticles were annealed at different temperatures in a vacuum chamber. The morphological, structural and magnetic properties of the iron oxide nanoparticles were investigated with high resolution X-ray powder diffraction (XRD), high resolution transmission electron microscopy (HRTEM), Mossbauer spectroscopy, and vibrating sample magnetometer analysis. According to the XRD and HRTEM analysis results, as-synthesized iron oxide nanoparticles were only magnetite ($Fe_3O_4$) phase with face-centered cubic structure but post annealed iron oxide nanoparticles at $700^{\circ}C$ were mainly magnetite phase with trivial maghemite ($\gamma-Fe_2O_3$) phase which was induced in the post annealing treatment. The crystallinity of the iron oxide nanoparticles is enhanced by the post annealing treatment. The particle size of the as-synthesized iron oxide nanoparticles was about 5 nm and the particle shape was almost spherical. But the particle size of the post annealed iron oxide nanoparticles at $700^{\circ}C$ was around 25 nm and the particle shape was spherical and irregular. The as-synthesized iron oxide nanoparticles showed superparamagnetic behavior, but post annealed iron oxide nanoparticles at $700^{\circ}C$ did not show superparamagnetic behavior due to the increase of particle size by post annealing treatment. The saturation of magnetization of the as-synthesized nanoparticles, post annealed nanoparticles at $500^{\circ}C$, and post annealed nanoparticles at $700^{\circ}C$ was found to be 3.7 emu/g, 6.1 emu/g, and 7.5 emu/g, respectively. The much smaller saturation magnetization value than one of bulk magnetite can be attributed to spin disorder and/or spin canting, spin pinning at the nanoparticle surface.

• 한국표면공학회지
• /
• 제34권2호
• /
• pp.89-96
• /
• 2001

N- or O-doped STS304 stainless films were synthesized by an unbalanced magnetron sputtering process with various argon and reactive gas ($N_2$, $O_2$) mixtures. These films were examined by scanning electron microscopy (SEM), X-ray diffraction (XRD), Auger electron spectroscopy (AES) and Knoop microhardness tester. The Results from X-ray diffraction (XRD) analysis showed that a STS304 stainless steel film synthesized without reactive gas using a bulk STS304 stainless steel target had a ferrite bcc structure ($\alpha$ phase), while the N-doped STS304 stainless film was consisted of a nitrogen supersaturated fcc structure, which hsa a strong ${\gamma}$(200) phase. In the O-doped films, oxide Phases ($Fe_2$$O_3$ and $Cr_2$$O_3$) were observed from the films synthesized under an excess $O_2$ flow rate of 9sccm. AES analysis showed that nitrogen content in N-doped films increased as the nitrogen flow rate increased. Approximately 43 at.%N in the N-doped film was measured using a nitrogen flow rate of 8sccm. In O-doped film, approximately 15 at.%O was detected using a $O_2$ flow rate of 12sccm. the Knoop microhardness value of N-doped film using a nitrogen flow rate of 8 sccm was measured to be approximately $H_{ k}$ 1200 and this high value could be attributed to the fine grain size and increased residual stress in the N-doped film.

• Advances in environmental research
• /
• 제3권3호
• /
• pp.231-251
• /
• 2014

The present study examines the phosphate adsorption potential and behavior of mixture of Ground Burnt Patties (GBP), a solid waste generated from cooking fuel used in earthen stoves and Red Soil (RS), a natural substance in fixed bed column mode operation. The characterization of adsorbent was done by Proton Induced X-ray Emission (PIXE), and Proton Induced ${\gamma}$-ray Emission (PIGE) methods. The FTIR spectroscopy of spent adsorbent reveals the presence of absorbance peak at $1127cm^{-1}$ which appears due to P = O stretching, thus confirming phosphate adsorption. The effects of bed height (10, 15 and 20 cm), flow rate (2.5, 5 and 7.5 mL/min) and initial phosphate concentration (5 and 15 mg/L) on breakthrough curves were explored. Both the breakthrough and exhaustion time increased with increase in bed depth, decrease in flow rate and influent concentration. Thomas model, Yoon-Nelson model and Modified Dose Response model were used to fit the column adsorption data using nonlinear regression analysis while Bed Depth Service Time model followed linear regression analysis under different experimental condition to evaluate model parameters that are useful in scale up of the process. The values of correlation coefficient ($R^2$) and the Sum of Square Error (SSE) revealed the Modified Dose Response model as the best fitted model to the experimental data. The adsorbent mixture responded effectively to the desorption and reusability experiment. The results of this finding advocated that mixture of GBP and RS can be used as a low cost, highly efficient adsorbent for phosphate removal from aqueous solution.

• 한국광학회지
• /
• 제3권3호
• /
• pp.183-190
• /
• 1992

$Al_x/Ga_{1-x}$ /As/AlAs GaAs 계로 이루어진 비대칭 이중 양자우물 구조의 광학적 특성을 photoluminescence, photoluminescence excitation, time-resolved photoluminescence를 통하여 조사하였다. 양자장벽 AlAs의 두께에 따른 특성 변화를 조사하기 위하여 두께를 15$\AA$., 150$\AA$로 제작하였다. 양자장벽이 15$\AA$인 경우 매우 빠른 전자의 관통 현상을 보여 주었으며, 이로 인해 $Al_x/Ga_{1-x}$As의 여기자 재결합에 해당하는 피크가 관찰되지 않았다. AlAs 양자장벽이 150$\AA$인 경우에는 $Al_x/Ga_{1-x}$As양자우물에서 여기자 재결합에 의한 피크가 50ps 이하로 빠른 decay시간을 보여 주었으며 이것은 양자장벽과의 $\Gamma$-X전이에 의한 것으로 사료되었다. GaAs양자우물에서의 luminescence decay는 두 시료 모두 1ns정도 이었으나, 15$\AA$인 경우에는 약 100ps의 rise시간이 존재하였으며 이것은 정공의 관통에 의한 시간으로 판명되었다.

• 한국재료학회지
• /
• 제29권2호
• /
• pp.97-105
• /
• 2019

In the current steel structures of high-rise buildings, high heat input welding techniques are used to improve productivity in the construction industry. Under the high heat input welding, however, the microstructures of the weld metal (WM) and heat-affected zone (HAZ) coarsen, resulting in the deterioration of impact toughness. This study focuses mainly on the effects of fine TiN precipitates dispersed in steel plates and B addition in welding materials on grain refinement of the HAZ microstructure under submerged arc welding (SAW) with a high heat input of 200 kJ/cm. The study reveals that, different from that in conventional steel, the ${\gamma}$ grain coarsening is notably retarded in the coarse grain HAZ (CGHAZ) of a newly developed steel with TiN precipitates below 70 nm in size even under the high heat input welding, and the refinement of HAZ microstructure is confirmed to have improved impact toughness. Furthermore, energy dispersive spectroscopy (EDS) and secondary-ion mass spectrometry (SIMS) analyses demonstrate that B is was identified at the interface of TiN in CGHAZ. It is likely that B atoms in the WM are diffused to CGHAZ and are segregated at the outer part of undissolved TiN, which contributes partly to a further grain refinement, and consequently, improved mechanical properties are achieved.

• 한국자기공명학회논문지
• /
• 제24권4호
• /
• pp.104-116
• /
• 2020

Fipronil, the phenylpyrazole insecticide, is effective and used in various fields. Especially, fipronil was reliable because it was known to be specific on invertebrate animals than vertebrate animals including mammals. However, fipronil had potential risks that affect vertebrate animals as it blocks the gamma-aminobutyric acid (GABA) receptors that also exists in vertebrates as well as invertebrates. Therefore, it was necessary that harmful effects of fipronil on vertebrates are clarified. For this purpose, the zebrafish (Danio rerio) were used on behalf of vertebrate animals in present study. The zebrafish were exposed to 5 ㎍/L, 25 ㎍/L, and 50 ㎍/L of fipronil during 12, 24 and 72 hours. To closely observe toxic process, 12 hours and 24 hours of additional time point were set in the exposure test. Nuclear magnetic resonance (NMR)-based metabolomics is an approach to detect metabolic changes in organism resulted from external stimuli. In this study, NMR-based metabolomics showed the metabolic changes in zebrafish caused by fipronil exposure. Metabolic analysis revealed that fipronil interfered with energy metabolism and decreased the antioxidant ability in zebrafish. Antioxidant ability decline was remarkable at high exposure concentration. In addition, metabolic analysis results over time suggested that reactions for alleviating the excessive nerve excitation occurred in zebrafish after fipronil exposure. Through this study, it was elucidated that the adverse effects of fipronil on vertebrate animals are evident. The risk of fipronil on vertebrates can be no longer ignored. Moreover, this study has a meaning of practically necessary research for organism by examining the effects of fipronil at low concentrations existed in real environment.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1021-1030
• /
• 2023

We propose an overall procedure for measuring and unfolding fast neutron spectra using a trans-stilbene scintillation detector. Detector characterization was described, including the information on energy calibration, detector resolution, and nonproportionality response. The digital charge comparison method was used for the investigation of neutron-gamma Pulse Shape Discrimination (PSD). A pair of values of 600 ns pulse width and 24 ns delay time was found as the optimized conditions for PSD. A fitting technique was introduced to increase the trans-stilbene Proton Response Function (PRF) by 28% based on comparison of the simulated and experimental electron-equivalent distributions by the Cf-252 source. The detector response matrix was constructed by Monte-Carlo simulation and the spectrum unfolding was implemented using the iterative Bayesian method. The unfolding of simulated and measured spectra of Cf-252 and AmBe neutron sources indicates reliable, stable and no-bias results. The unfolding technique was also validated by the measured cosmic-ray induced neutron flux. Our approach is promising for fast neutron detection and spectroscopy.

• Journal of Radiation Protection and Research
• /
• 제22권2호
• /
• pp.111-117
• /
• 1997

최근 포괄적 핵실험금지조약 (Comprehensive Test Ban Traety : CTBT)의 체결은 전세계적으로 핵활동 감시 네트워크를 구축하는 것이다. 핵실험금지 위원회의 전문가들은 대기 방사성핵종의 측정을 핵실험 감시에 필수적인 요소로 제안하였으며, 이에 따른 기술적 요구사항을 제시하였다. 본 연구는 이를 근거로 핵활동으로부터 생성된 핵분열생성물을 검출하기 위하여 고성능 공기채집장치(High Volume Air Sampler: HVAS)와 여과지 압축기 그리고 고순도 게르마늄 반도체검출기(HPGe)로 대기 입자 방사성핵종 측정시스템을 구성하였다. 조속한 시일 내에 탐지와 최적의 측정 조건으로 본 시스템을 운영하기 위하여 CTBT 감시 전략에서 주요 핵종들에 대한 최소검출 방사능 농도(Minimum Detectable Concentration : MDC)를 decay time, counting time 그리고 sampler volumetric flow rate 등을 고려하여 결정하였다. 그 결과 각각 $10{\pm}$2h, $20{\pm}$2h, $850{\pm}50m^3$//h 정도로 선정하였다. 감마선 스펙트럼 분석에서 $^{212}Pb$ 방사능 농도의 변화는 Compton continuum의 baseline에 영향을 미치게 되므로 이에 기인한 MDC 관계식을 도출하였다. 이들 결과는 CTBT 감시 전략에 실제적인 도구로 사용될 수 있을 것으로 사료된다.

• 한국식품과학회지
• /
• 제34권1호
• /
• pp.18-23
• /
• 2002

방사선 조사된 대두의 검지방법을 연구하기 위하여 국산 및 중국산 대두에 대하여 $0.5{\sim}4.0\;kGy$의 감마선을 조사하고 열발광(TL), 전자스핀공명(ESR) 및 DNA comet 특성을 비교 검토하였다. TL 측정에서 비조사구는 $280^{\circ}C$ 부근에서 매우 낮은 glow curve를 나타내었고, 감마선 조사구는 $200^{\circ}C$ 부근에서 조사선량에 의존적인 glow curve를 나타내었다. 재조사(re-irradiation) 방법에 의한 TL ratio$(TL_1/TL_2)$의 비교는 TL 측정 결과의 정확도를 높여 주었다. 원산지별 TL 특성 비교에서 국산을 중국산에 비해 높은 TL intensity를 나타내었다(p<0.01). 대두 껍질을 사용한 ESR 측정에서는 조사시료에서 cellulose radical 유래의 특이한 signal(g = 2.02374, 1.98715)을 보여주었고 중국산 시료의 ESR signal이 더 높게 나타났다. 비조사 대두의 DNA comet은 tail이 없거나 아주 짧은 tail을 가진 전형적인 intact cell을 나타내었다. 그러나 0.5 kGy 이상의 감마선 조사 시료에서는 조사선량에 의존적으로 comet의 tail length 증가와 더불어 comet의 크기 및 농도의 변화가 일어났다. 이상의 결과에서 TL, ESR 및 DNA comet의 분석은 대두의 방사선 조사 여부 확인을 가능하게 하였으며, 원산지별 검지특성의 차이는 거의 없었다.

• 한국재료학회지
• /
• 제23권4호
• /
• pp.233-239
• /
• 2013

We collected Seokganju minerals (regions in Gyeryong Mountain, Sangsin-ri, Banpo-myeon, Gongju Chungcheongnam-province), which were used as natural color pigments for grayish-blue during the 15th~16th centuries of the Joseon era, and investigated their crystallographic features to develop a black pigment having a spinel structure. By a Raman analysis, the color of Seokganju under transparent glaze as a pigment for painting was black because hematite ($Fe_2O_3$) in Seokganju was converted to magnetite ($Fe_3O_4$) However, Seokganju into the transparent glaze as a pigment was brown because of hematite ($Fe_2O_3$) and small amounts of maghemite (${\gamma}-Fe_2O_3$) in Seokganju minerals. Only Seokganju mineral is used, it is not suitable for black pigment into the transparent glaze. This study tried to develop a spinel crystal black pigment stabilized by Seokganju with CoO, $Cr_2O_3$, NiO, and $MnO_2$ at $1280^{\circ}C$. A Raman spectroscopy analysis was performed to verify the presence of Mn The results showed that it existed as spinel, and two crystal phases $CoFe_2O_4$ and $MnFe_2O_4$ were mixed. $CoFe_2O_4$ spinel has a dark grayish black color and $MnFe_2O_4$ spinel has a greenish black color, and these two appeared as black. The color of a specimen calcined by adding 6 wt% of pigment mixed with 5 wt% of $MnO_2$ added to lime glaze was analyzed with a UV spectrophotometer. When applying the color pigment, it appeared black stabilized with $L^*$24.23, $a^*$ 0.12, $b^*$ -2.29 at $1260^{\circ}C$ oxidative calcination, With $1240^{\circ}C$ reduction firing, it is appeared black stabilized with low brightness of $L^*$ 23.13, $a^*$ -1.12, $b^*$ 0.54.