• Journal of Internet Computing and Services
• /
• v.17 no.2
• /
• pp.19-28
• /
• 2016

Internet traffic has been significantly increasing due to the development of information and communication networks and the growing numbers of cell phone users that access networks. This paper connects to this issue by presenting a way to detect and analyze a typical DDoS attack that results in Internet breaches and network attacks, which are on the increase. To achieve this goal, we improve features and GUI of the existing ATMSim analysis package and use it. This package operates on a network flow-based analysis method, which means that normal traffic collected through an internal LAN at the Korean Bible University campus as well as anomaly traffic with DDoS attacks are generated. Self-similarity processes are used to analyze normal and anomaly traffic that are collected and generated from the improved ATMSim. Our numerical results obtained from three Hurst parameter estimate techniques show that there is quantitatively a significant difference between normal traffic and anomaly traffic from a self-similarity perspective.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.5
• /
• pp.602-611
• /
• 2015

Even though GNSS provides highly accurate navigation information all over the world, it is vulnerable to jamming in the electronic warfare due to its weak signal power. The United States and Korea have plans to use terrestrial navigation systems as back-up systems during outage of GNSS. In order to develop back-up systems of GNSS, an M&S software platform is necessary for performance evaluation of various vehicle trajectories and integrated navigation systems. In this paper a design method of an M&S software is proposed for evaluation of multiple radio positioning integration systems. The proposed M&S software consists of a navigation environment generation part, a navigation algorithm part, a GUI part and a coverage analysis part. Effectiveness of the proposed design method is shown by implementing an M&S software for the GPS, DME and eLoran navigation systems.

• Journal of KIISE:Software and Applications
• /
• v.30 no.1_2
• /
• pp.117-128
• /
• 2003

Software usability is a characteristic of the software that is decided based on learnability, effectiveness, and satisfaction when it is evaluated. The usability is a main factor of the software quality. A software has to be continuously improved by taking guidelines that comes from the usability evaluation. Usability factors may vary among the different software products and even for the same factor, the users may have different opinions according to their experience and knowledge. Therefore, a usability evaluation process must be developed with the consideration of many factors like various applications and users. Existing systems such as satisfaction evaluation and performance evaluation only evaluate the result and do not perform cause analysis. And also unified evaluation items and contents do not reflect the characteristics of the products. To address these problems, this paper presents a evaluation model that is based on the mental model of user and the problems, this paper presents a evaluation model that is based on the mental model of user and the emotion of users. This model uses evaluation factors of the user task which are extracted by analyzing usage of the target product. In the mental model approach, the conceptual model of designer and the mental model of the user are compared and the differences are taken as a gap also reported as a part to be improved in the future. In the emotional factor approach, the emotional factors are extracted for the target products and evaluated in terms of the emotional factors. With this proposed method, we can evaluate the software products with customized attributes of the products and deduce the guidelines for the future improvements. We also takes the GUI framework as a sample case and extracts the directions for improvement. As this model analyzes tasks of users and uses evaluation factors for each task, it is capable of not only reflecting the characteristics of the product, but exactly identifying the items that should be modified and improved.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.5
• /
• pp.544-555
• /
• 2002

The aim of this study is to develop the $^1H$-MRS data postprocessing software for both single-voxel and multi-voxel technique, which plays and important role as a diagnostic tool in clinical field. This software is based on graphical user interface(GUI) under windows operating system of personal computer(PC). In case of single-voxel MRS, both of raw data in time-domain and spectrum data in frequency-domain are simultaneously displayed in a screen. Several functions such as DC correction, zero filling, line broadening, Lorentz-Gauss filtering and phase correction, etc. are included to increase the quality of spectrum data. In case of multi-voxel analysis, spectroscopic image reconstructed by 3-D FFT was displayed as a spectral grid and overlapped over previously obtained T1- or T2-weighted image for the spectra to be spatially registered with the image. The analysis of MRS peaks were performed by obtaining the ratio of peak area. In single-voxel method, statistically processed peak-area ratios of MRS data obtained from normal human brain are presented. Using multi-voxel method, MR spectroscopic image and metabolite image acquired from brain tumor are demonstrated.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.4
• /
• pp.185-192
• /
• 2021

Various methods have been proposed to determine the defect detection of welding bead, and recently sensor data and image data inspection have been steadily announced. There are advantages that sensor data inspection is highly accurate, and two-dimensional-based image data inspection is able to determine the position of the welding bead. However, when analyzing only with sensor data, it is difficult to determine whether the welding has been performed at the correct position. On the other hand, the image data inspection does not have high accuracy due to noise and measurement errors. In this paper, we propose a method that can complement the shortcomings of each inspection method and increase its advantages to improve accuracy and speed up inspection by fusing sensor data inspection which are average current, average volt, and mixed gas data, and image data inspection methods and is implemented as software. In addition, it is intended to allow users to conveniently and intuitively analyze and grasp the results by performing analysis using a graphical user interface(GUI) and checking the data and inspection results used for the inspection. Sensor inspection is performed using the characteristics of each sensor data, and image data is inspected by applying a morphology geodesic active contour algorithm. The experimental results showed 98% accuracy, and when performing the inspection on the four image data, and sensor data the inspection time was about 1.9 seconds, indicating the performance of software that can be used as a real-time inspector in the welding process.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.1
• /
• pp.36-42
• /
• 2009

We have developed software for converting the volumetric voxel data obtained from X-ray computed tomography(CT) into computer-aided design(CAD) data. The developed software can used for non-destructive testing and evaluation, reverse engineering, and rapid prototyping, etc. The main algorithms employed in the software are image reconstruction, volume rendering, segmentation, and mesh data generation. The feasibility of the developed software is demonstrated with the CT data of human maxilla and mandible bones.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.12
• /
• pp.1423-1436
• /
• 1992

In the paper, a CAT interface supporting multitask is realized. To interface a computer with measuring instruments, a GPIB card is designed and implemented. Controlling and displaying software using OOP and GUI are programmed with C++. A spectrum analyzer and a power meter are chosen as object instrument to be controlled. Total 9 modules are configured to manage the various resources and each module in integrated system. Also in case that several instruments are used, the system is realized to be capable of multitasking to exchange the data mutually. The multitasking is implemented under the time-sharing DOS environment. Thread-based method is used for processing, and Round Robin method for scheduling. Provided proper software modules for other object instruments are integrated, the system can control more measuring instruments simultaneously by the computer. Users can save the time and errors even without expert knowledge.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.961-964
• /
• 2000

단위 자동화 시스템에 내장되어 운용되는 내장형 시스템의 응용 소프트웨어의 제작은 대부분 다년간 실무 경험을 갖고 있는 전문가들이 타겟 시스템의 목적과 기능 및 성능 명세를 작성하고 이를 구현함으로써, 개발 생산성이나 타겟 시스템의 신뢰성 향상이 곤란하다. 또한 개발의 마지막 단계에서 테스트를 통해 오류를 발견하게 되고 이로 인해 대부분 앞 단계로 돌아가 전체 설계를 재검토해야만 하는 실정이다. 본 논문에서는 이러한 내장형 응용 소프트웨어 개발을 위해 편의성과 신뢰성을 향상시킬 수 있기 위해 소프트웨어 자동 검증을 위한 정형기법, 컴파일러 및 사용자 편의를 위한 GUI, 재사용 및 유지보수가 용이한 목적코드의 발생 등 전반적인 소프트웨어 공학적인 기술들을 이용하여 시각적 명세에 의한 실시간 내장형 응용 소프트웨어 개발 자동화 도구의 개발을 위한 기술의 개발을 목표로 삼고 기술되었다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.3
• /
• pp.288-293
• /
• 2010

In these information-communication society, the wireless system technologies are increasing to do all things with wireless solution for fast and convenient works. This trend drives ubiquitous solutions which are based on broadband wireless network that gives network connection whenever, everywhere. This paper deals a bookshelf management system using plower line communication and RFID module. This system includes a 900 MHz RFID reader, Passive RFID-Tags, an Atmeg128 microprocessor board attached LED Display Module, and a management PC with GUI Software. This system works well in power line communication, tag reading and LED display, and PC Management Software.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1373-1381
• /
• 2007

This paper presents a graphical windows-based software for the education and training of transmission network charge. The motivation for the development of the simulator is to provide students with a simple and useable tool for gaining an intuitive feel for transmission network charge. The developed simulator consists of the main module (MMI, GUI), the power flow module (PF), the power flow tracing module (PFT), and usage cost DB module (UCD). Each module has a separate graphical and interactive interfacing window. The developed simulator provides with two power system analysis methods (i.e., DC-PF and Modified DC-PF) and supports the PSS/E input data format to load input data of power system. Also, power flow tracing can be calculate using four methods such as "Felix Wu", "Modified Felix Wu", "DCLF ICRP", and "Reverse MW mile". Results of calculation for transmission usage cost are displayed and compared on the window through the table and/or chart. Therefore, the developed simulator can be utilize as a useful tool for effective education and training of transmission network charge.