• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.333-344
• /
• 2022

The quarrying and utilization of natural building stones such as granite and marble are rapidly emerging in developing countries. A huge amount of wastes is being generated during the processing, cutting and sizing of these stones to make them useable. These wastes are disposed of in the open environment and the toxic nature of these wastes negatively affects the environment and human health. The growth trend in the world stone industry was confirmed in output for 2019, increasing more than one percent and reaching a new peak of some 155 million tons, excluding quarry discards. Per-capita stone use rose to 268 square meters per thousand persons (m²/1,000 inh), from 266 the previous year and 177 in 2001. However, we have to take into consideration that the world's gross quarrying production was about 316 million tons (100%) in 2019; about 53% of that amount, however, is regarded as quarrying waste. With regards to the stone processing stage, we have noticed that the world production has reached 91.15 million tons (29%), and consequently this means that 63.35 million tons of stone-processing scraps is produced. Therefore, we can say that, on a global level, if the quantity of material extracted in the quarry is 100%, the total percentage of waste is about 71%. This raises a substantial problem from the environmental, economical and social point of view. There are essentially three ways of dealing with inorganic waste, namely, reuse, recycling, or disposal in landfills. Reuse and recycling are the preferred waste management methods that consider environmental sustainability and the opportunity to generate important economic returns. Although there are many possible applications for stone waste, they can be summarized into three main general applications, namely, fillers for binders, ceramic formulations, and environmental applications. The use of residual sludge for substrate production seems to be highly promising: the substrate can be used for quarry rehabilitation and in the rehabilitation of industrial sites. This new product (artificial soil) could be included in the list of the materials to use in addition to topsoil for civil works, railway embankments roundabouts and stone sludge wastes could be used for the neutralization of acidic soil to increase the yield. Stone waste is also possible to find several examples of studies for the recovery of mineral residues, including the extraction of metallic elements, and mineral components, the production of construction raw materials, power generation, building materials, and gas and water treatment.

• Journal of Life Science
• /
• v.32 no.8
• /
• pp.633-640
• /
• 2022

Recently, kenaf (Hibiscus cannabinus L.) has been highlighted due to its rapid growth in dry, infertile land and its versatile applications in textiles, paper, feed, food, medicine, and phyto-remediation. In Korea, a new cultivar, 'Jangdae', which has the merit of feasible seed-gathering, was established in 2013. However, most of the kenaf seeds used are still imported, and a comparison study of useful bio-activities between Jangdae and imported seeds has not been conducted. In this study, anti-thrombosis, antioxidant and anti-diabetic activities of the ethanol extracts of the Jangdae seed (E-JS) and 8 imported cultivar seeds (E-ICS) were investigated. The E-JS has 14.4 mg/g of total polyphenol and 5.3 mg/g of total flavonoids, whereas the E-ICS has 5.9~8.7 mg/g and 0.7~1.5 mg/g, respectively. Among the 9 kenaf seed extracts, IT 181215 and IT 207877 seed extracts showed 1.92 and 1.88-folds extended thrombin time (TT), and IT 207886 seed extracts showed 3.04-folds extended activated partial thromboplastin time (aPTT). All extracts, except Hong-ma seed, showed 1.36~1.56-folds extended prothrombin time (PT). The E-JS showed strong anti-thrombosis activities with 1.46-folds (TT), 1.38-folds (PT) and 2.37-folds (aPTT) compared to those of solvent controls. The E-JS has the strongest antioxidant activities among the seed extracts, with 0.48 mg/ml of RC₅₀ for ABTS cation and 0.27 mg/ml of RC₅₀ for nitrite scavenging. Meanwhile, the E-JS and IT 181215 extracts showed strong inhibition against α-glucosidase with 10.3~10.6% inhibition at 0.5 mg/ml. Our results suggest the E-JS has potential as an anti-thrombosis, antioxidant and anti-diabetic agent.

• Journal of Bio-Environment Control
• /
• v.31 no.2
• /
• pp.79-89
• /
• 2022

With the wide use of greenhouses, the working hours have been increasing inside the greenhouse for workers. In the closed ventilated greenhouse, the internal environment has less affected to external weather during making a suitable temperature for crop growth. Greenhouse workers are exposed to organic dust including soil dust, pollen, pesticide residues, microorganisms during tillage process, soil grading, fertilizing, and harvesting operations. Therefore, the health status and working environment exposed to workers should be considered inside the greenhouse. It is necessary to secure basic data on particulate matter (PM) concentrations in order to set up dust reduction and health safety plans. To understand the PM concentration of working environment in greenhouse, the PM concnentrations were monitored in the cut-rose and Hallabong greenhouses in terms of PM size, working type, and working period. Compare to no-work (move) period, a significant increase in PM concentration was found during tillage operation in Hallabong greenhouse by 4.94 times on TSP (total suspended particle), 2.71 times on PM-10 (particle size of 10 ㎛ or larger), and 1.53 times on PM-2.5, respectively. During pruning operation in cut-rose greenhouse, TSP concentration was 7.4 times higher and PM-10 concentration was 3.2 times higher than during no-work period. As a result of analysis of PM contribution ratio by particle sizes, it was shown that PM-10 constitute the largest percentage. There was a significant difference in the PM concentration between work and no-work periods, and the concentration of PM during work was significant higher (p < 0.001). It was found that workers were generally exposed to a high level of dust concentration from 2.5 ㎛ to 35.15 ㎛ during tillage operation.

• Journal of Korea Port Economic Association
• /
• v.37 no.3
• /
• pp.117-128
• /
• 2021

In order for the users (shipping firms and shippers) and suppliers (stevedoring firms) in the container terminal industry to win-win, it is necessary to have some appropriate diverse market conditions for the industry. This study analyses the basic conditions and demand and supply characteristics of the industry and investigates the market performance of Busan container ports. First, this article analyses the basic characteristics of demand and supply. As the demand characteristics, there are five ones such as 1) exogeneity of demand, 2) function as export/import transportation and hub for transshipment, 3) increase of users' bargaining power, 4) high substituting elasticity, 5) reduction of volume growth. As the supply characteristics, there are seven ones such as 1) inelasticity of supply, 2) homogeneity of stevedoring services, 3) over-supply, 4) adoption of cutting-edge stevedoring technology, 5) scale economy and impossibility of storage, 6) labor market rigidity, 7) enhancing port's role in SCM. In addition, this study conducts the so-called structure-conduct-performance analysis. For the structure analysis, 1) lacks of scale economy in stevedoring companies, 2) high entry barrier, 3) strengthening of shipping firms' bargaining power, 4) transitory permission scheme for tariff are analyzed. For the conduct analysis, 1) price discrimination between export/import and transshipment, 2) mid-term length of terminal use contract, 3) continuous investment in equipment, 4) low level of cooperation among terminal operating firms are derived. For the performance analysis, 1) inequality in profitability, 2) reduction of export/import cost, 3) delay in adopting cutting-edge technology, 4) idle equipment are analyzed. Following this logical flow, the hypothesis that the market structure influences the market conduct is tested based on the actual dataset. As a future agenda in the conclusion, this article recommends the so-called port industrial policy.

• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.22-27
• /
• 2022

The attraction effects of light emitting diode (LED) trap to Spodoptera exigua and Spodoptera litura adults were evaluated in greenhouse and compared with those of no light trap, which is typical used in commercial trap. At this time, in order to attract these two species of moths, sex pheromone traps were installed at the top side according to the degree of tomato growth inside the tomato cultivation greenhouse around the LED trap. In addition, two types of light-emitting traps (420 nm, 470 nm) were installed in the greenhouse at 1/40 m², respectively. Also two sex pheromone were installed inside of the greenhouse according to the height of the tomato plants. 10 days later, Blue-light trap(BLB, 470 nm wavelength) was 3.1-3.5 times more attractive than Violet-light trap(VLB, 420 nm wavelength) in S. exigua (105.6 ± 7.3) and S. litura (42.0 ± 3.1) respectively, whereas the no-light trap was little attractive to S. exigua (33.7 ± 2.8) and S. litura (12.0 ± 1.5). On the other hand, after the installation of the sex pheromone trap and the LED trap, there was no damage to S. litura (Fabricius) and S. exigua in the pesticide-free area, indicating a high possibility of control. At this time, the operating cost of the two types of LED traps was 80 won/m² per unit area, and it was confirmed that both types of moths could be controlled. In addition, as a result of confirming the number of two types of moths caught in the sexual pheromone trap and two types of LED traps after 4 months, it was judged that eco-friendly control was possible as more than 373 moths/trap were attracted to the two types of moths.

• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.43-51
• /
• 2022

This study was conducted to investigate the effect of ventilation at high temperature on the control of powdery mildew, silverleaf whitefly two-spotted spider mite occurred at Korean melon cultivation greenhouse, and on leaf rolling and flowering of the plant in summer season. 'Alchanggul' grafted onto 'Hidden Power' rootstock was planted on soil bed with the distance of 40 cm. Three ventilation temperatures of 45℃, 40℃, and 35℃ as set points were compared. Ventilation treatment was done by control of side window operation from 18th June to 13th July when silverleaf whitefly, mite, and powdery mildew were occurred in all greenhouses. The temperature inside greenhouse was increased up to the set temperature point on sunny days and maintained for about 9 hours with high relative humidity at 45℃ condition. The differences of day maximum air temperature and day minimum RH were the highest at 45℃ treatment. After 11 days of treatments, the damage by powdery mildew and two-spotted spider mite was almost recovered at 45℃ treatment but not at 40 and 35℃. The population of silverleaf whitefly and two-spotted spider mite were significantly decreased at 45℃ treatment at 14 days after treatment, while powdery mildew symptom was not significantly decreased. Leaf rolling was observed at high temperature but not severe at 45℃ treatment. After 26 days of treatments, female flowers did not bloom at all at 45℃ treatment, and the number of male flowers was 1.2 among 15 nodes of newly grown shoots. As the result, it indicates that ventilation at the high temperature of 45℃ for about 2 to 3 weeks can be an applicable method to control above mentioned pests and disease, and to recover the vegetative growth of Korean melon by reducing flowering of the plant.

• Journal of Christian Education in Korea
• /
• v.71
• /
• pp.121-154
• /
• 2022

This study is to summarize the relationship between youth in terms of developmental psychology, university education, faith, and spirituality in order to form and improve relationships, which are major developmental tasks of youth, and to suggest Christian youth education by the elements of education. Relationships are formed when you are connected to another person and community, feel interested in each other, feel a sense of bond and belonging, and maintain a stable and satisfactory relationship. This is not skill or technology, but is related to life attitude and value, and continuous learning and training are required. Various developmental tasks in youth have something in common with relationships. Relationships positively affect the lives of young people, such as satisfaction with college life in the early stages of youth, adaptation to college life, personality, and career decision. Relationships are also very important in faith because human existence and faith are defined and formed through relationships. The relationship between the community and others plays an important role in spiritual development for the meaning of life and inner growth. In the aspects of learners and educational environment, it was suggested to understand learners with desire for relationships, the generation they live in, and the educational environment in which the relationship between young people occurs. In terms of teachers, teachers have to try to change their roles such as facilitators, guides, managers, and mentors. For the educational purpose and content, it was suggested that relationships should be the ultimate purpose and the educational content for this was presented in three different types of relationships and each main contents to be dealt with. In terms of educational method, it was proposed to select a learner-centered group learning method that induces communication and active participation of learners to cause interaction by considering other elements of education according to the content of the relationship in the cognitive, emotional, and behavioral dimensions. In the aspects of educational results and evaluation, it was proposed to confirm that what was considered during the educational planning stage was effectively carried out in actual education, to evaluate various evaluation methods, various aspects, and to summarize the evaluation results for the specific application.

• Journal of Christian Education in Korea
• /
• v.71
• /
• pp.61-96
• /
• 2022

This study tried to explore the ways to operate service learning more effectively by analyzing the educational effects of service learning and changes in learning sentiments that appeared in the service learning operation process established for the realization of the Christian educational philosophy at a small local Christian university. The analysis was conducted using NVivo11, focusing on the reflection journals of students who participated in service learning in the first semester of 2022 at J University. As a result of the study, through service learning, personal competence growth, self-reflection and will to change, self-esteem and self-efficacy, social and civic aspects, social responsibility enhancement, community (community) empathy and awareness of participation, and helping others There were educational effects such as an increase in the breadth of understanding. In addition, learning emotions that appeared in the service learning process included positive emotions such as gratitude, challenge recognition, pride, confidence, and responsibility, and negative emotions such as worry (difficulty), upset, regret, and awkwardness. It is a measure to increase the educational effect based on the learning emotion shown in the service learning process. When operating service learning, the service period at the visiting institution is increased to 6 weeks or more, and based on close interaction and detailed analysis of the educational environment in the planning stage, Suggest to develop and operate a plan. In addition, if you have the opportunity to receive feedback from your professors and colleagues through demonstrations and mock presentations in the classroom before visiting the institution, and finally have the opportunity to visit the institution again after the results of service learning are announced, more quality service learning education will be operated. Based on the results of this study, it is expected that more valuable and meaningful service learning education opportunities will be provided to learners by designing and operating a practical and sophisticated service learning curriculum.

• Research in Plant Disease
• /
• v.28 no.3
• /
• pp.113-121
• /
• 2022

Rice blast is a major plant disease that occurs worldwide and significantly reduces rice yields. Rice blast disease occurs periodically in Korea, causing significant socio-economic damage due to the unique status of rice as a major staple crop. A disease outbreak prediction system is required for preventing rice blast disease. Epidemiological investigations of disease outbreaks can aid in decision-making for plant disease management. Currently, plant disease prediction and epidemiological investigations are mainly based on quantitatively measurable, structured data such as crop growth and damage, weather, and other environmental factors. On the other hand, text data related to the occurrence of plant diseases are accumulated along with the structured data. However, epidemiological investigations using these unstructured data have not been conducted. The useful information extracted using unstructured data can be used for more effective plant disease management. This study analyzed news articles related to the rice blast disease through text mining to investigate the years and provinces where rice blast disease occurred most in Korea. Moreover, the average temperature, total precipitation, sunshine hours, and supplied rice varieties in the regions were also analyzed. Through these data, it was estimated that the primary causes of the nationwide outbreak in 2020 and the major outbreak in Jeonbuk region in 2021 were meteorological factors. These results obtained through text mining can be combined with deep learning technology to be used as a tool to investigate the epidemiology of rice blast disease in the future.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_1
• /
• pp.627-646
• /
• 2022

Recently, the seriousness of climate change-related problems caused by global warming is growing, and the average temperature is also rising. As a result, it is affecting the environment in which various temperature-sensitive creatures and creatures live, and changes in the ecosystem are also being detected. Seasons are one of the important factors influencing the types, distribution, and growth characteristics of creatures living in the area. Among the most popular and easily recognized plant seasonal phenomena among the indicators of the climate change impact evaluation, the blooming day of flower and the peak day of autumn leaves were modeled. The types of plants used in the modeling were forsythia and cherry trees, which can be seen as representative plants of spring, and maple and ginkgo, which can be seen as representative plants of autumn. Weather data used to perform modeling were temperature, precipitation, and solar radiation observed through the ASOS Observatory of the Korea Meteorological Administration. As satellite data, MODIS NDVI was used for modeling, and it has a correlation coefficient of about -0.2 for the flowering date and 0.3 for the autumn leaves peak date. As the model used, the model was established using multiple regression models, which are linear models, and Random Forest, which are nonlinear models. In addition, the predicted values estimated by each model were expressed as isopleth maps using spatial interpolation techniques to express the trend of plant seasonal changes from 2003 to 2020. It is believed that using NDVI with high spatio-temporal resolution in the future will increase the accuracy of plant phenology modeling.