• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.15-19
• /
• 2004

Domestic use, or embody program that transmit NMEA protocol using multi port as software and is using because there is no fee and product that develop NMEA protocol Multiplexer, import mounting for foreign climax present. These method is paid or there is problem that must make out special processing part in each application program. Also, each mountings that display NMEA protocol can cause double resources waste and damage etc. because manufacturing firm and platform are different. Can act separatively as single hardware module of reliable processing method and high efficiency to supplement this in this treatise, and because using design of optimized cue, heighten memory efficiency of module, and proposed NMEA protocol Multiplexer that can keep high trustability of Come on, deviation compass, echo sound, mountings of GPS and so on and real time communication that is main input sensor equipment about embodiment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1254-1260
• /
• 2009

CDMA tele-Controller system is designed with a low power consumption 8 bit microcontroller, ATmega 2560. ATmega 2560 microcontroller consists of 4 UART (Universal asynchronous receiver/transmitter) ports, 4 kbytes EEPROM, 256 kbytes flash memory, 4 kbytes SRAM. 4 URAT is used for CDMA modem, communication for GPS module, EEPROM is used for saving a configuration for program running, a flash memory of 256 kbytes is used for storing a F/W(Firm Ware), and SRAM is used for stack, storing memory of global variables while program running. We have tested the communication distance between the coast station and sea by the fabricated control board using 800 MHz CDMA modem and GPS module, which is building for the navigational aid management system by remote control. As a results, the receiving signal strength is above -80 dBm, and then the characteristics of the control board implemented more than 10 km in the distance of the communication.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.4
• /
• pp.327-334
• /
• 2013

In August 2012 the first CanSat competition was hosted by the Satellite Research Center of KAIST under auspice of the Ministry of Education, Science and Technology. The present authors team won the first prize in the university session. In this paper the overall procedure of the CanSat project presented from the conceptual design stage to the final launch test. As the compulsory mission CanSat should send GPS data and attitude information to the ground station which in practice was performed via Bluetooth channel. In addition our CanSat is designed to trace the sun for the solar panels supplying electric power of satellite. IMU and servo motors are used for the attitude control in order that the solar sensor of the CanSat is always direct towards the sun. Launching of CanSat was simulated by dropping from a balloon at the height of around 150m via parachute. Launching test results showed that the attitude control of the CanSat and its solar sensing function were successful.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.165-172
• /
• 2013

In this paper, high-quality mosaic image is generated by high-resolution hyperspectral strip images using scale-invariant feature transform (SIFT) algorithm, which is one of the representative image matching methods. The experiments are applied to AISA Eagle images geo-referenced by using GPS/INS information acquired when it was taken on flight. The matching points between three strips of hyperspectral images are extracted using SIFT method, and the transformation models between images are constructed from the points. Mosaic image is, then, generated using the transformation models constructed from corresponding images. Optimal band appropriate for the matching point extraction is determined by selecting representative bands of hyperspectral data and analyzing the matched results based on each band. Mosaic image generated by proposed method is visually compared with the mosaic image generated from initial geo-referenced AISA hyperspectral images. From the comparison, we could estimate geometrical accuracy of generated mosaic image and analyze the efficiency of our methodology.

• Spatial Information Research
• /
• v.13 no.1 s.32
• /
• pp.55-63
• /
• 2005

Direct Georeferencing(DG) Is based on the direct measurement of the projection centers and rotation angle of sensor through loading the GPS and INS in aircraft. The methods can offer us to acquire the exterior orientation parameters with only minimum GCPs, even the ground control process could be completely skipped. Hence, as long as securing Digital Elevation Model (DEM), it is feasible to generate digital orthophotos without performing the aerial triangulation with Ground Control Point (GCP) surveying. In this study, the DEM is automatically generated by using a image matching technique based on aerial photos and exterior orientation parameters. This is followed by producing an orthophoto from these results. Finally, accuracy analysis of the georeferencing technique for generating orthoimage indicates that RMS errors of 62cm and 76cm occurred at the X and the Y axis, respectively. This means that the results fulfill the demanding accuracy of the 1:5000 digital map. Hence, it is possible to conclude from this study that the direct georeferencing based orthoimage generation method is able to effectively digital map update.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.327-332
• /
• 2006

In airborne gravimetry, there are two data streams. One is the specific force measured by an air/sea gravimeter or accelerometers, the other is kinematic acceleration measured by DGPS. And the difference of them provides the gravity disturbance information. To satisfy the requirement of most applications, an accuracy of 1mGal $(1mCal=10^{-5}m/s^{2})$ with a spatial resolution of 1km is the aim of current airborne gravimetry. There are two different methods to derive the kinematic acceleration. The generally used method is to differentiate the position twice, and the position can be calculated by commercial DGPS software. The main defect of this method is that integer ambiguities need to be fixed to get the precise position solution, but it's not a trivial thing for long base line. And to fix integer ambiguities, the noisier iono-free measurement is used. When differentiation is applied, noise is amplified and will influence the accuracy of acceleration. The other method is to get carrier phase acceleration by differentiate the carrier phase first, and then using the acceleration of GPS satellite to derive the vehicle acceleration. The main advantages include that fixing integer ambiguities is not needed anymore, position can be relaxed to about 10 meters, and smoother acceleration can be got since iono-free measurement is not needed. In some literatures, it's considered that the dynamic performance of the second method is inferior to that of the first. Through analysis, it is found that the performance degradation in dynamic environment results from the simplification of the GPS carrier phase observable model. And an iterative algorithm is presented to compensate the model error. Using a dynamic GPS data from an aeromagnetic survey, the importance of this compensation is showed at last.

• Journal of Information Technology Services
• /
• v.10 no.1
• /
• pp.105-116
• /
• 2011

With recent spotlight on the, uniquitous computing technology, the need for object of indentification and location infrastructure has increased. Such GPS technolgy must utilize IEEE 802.15.4 Zigbee used for existing wireless sensor network infra as a basice element for user's context-awareness in a uniquitous environement, for effectiveness.Such real-time GPS service is provided in the internal environment where the user would actually are and most high-rise buildlings apply. Underthe assumption, the real-time GPS technology is seperated by each floor, and signals do not get transmitted to other floors, the application on one floor within the high-rise buildling was conducted. This study intends to suggest a floor detection algorithm using IEE 802.15.3/Zigbee's RSSI which supports the accuracy within a couple of meters for the user's the movement between the floors in high-rise buildings in a complex environment. It proposes an floor detection algorithm using IEEE 802.15.4/Zigbee's RSSI which provides accuracy within a radius of few meters for the users movement between the floors for real-time location tracking within high-rise building in a cmoplex environment. Furthermore, for more accurate real-time location tracking, it suggests an algorithm for real-time location tracking using IEEE 802.15.4a/Zigbee's CSS technology based on triangulation. Based on the suggested algorithm, it designs a hybrid real-time location tracking service system in a high-rise buildling and test its functions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2853-2858
• /
• 2013

This paper proposes the ITMS(Intelligent Transport Monitoring System) which manages the route and state of freight by using the Meteorological Office, the Transportation Management Center, GPS and Sensors, etc. The ITMS consists of the CIMS(Container Inner Monitoring System) transmitting the inner temperature and humidity of a container, the TMM(Transport Management Module) computing an estimated time of arrival with Freight Vehicle location information and transmits the result to the CIMS, the FMM(Freight Management Module) checking and managing the freight freshness by using the temperature and humidity of the collected containers, and the SMM(Stevedoring Management Module) selecting the container loading and unloading places with the information transmitted from the CIMS, the TMM, and the FMM and attaching the freight formation to containers using an RFID label. The ITMS not only checks the freight condition at intervals but also acquires and manages the freight information with RFID labels rapidly and accurately.

• The KIPS Transactions:PartA
• /
• v.16A no.5
• /
• pp.381-388
• /
• 2009

The spread of wireless Internet technology development and applications with location information in the form of location-based services are becoming more diverse. In particular, where you recognize the location of objects such as people and things and to provide valuable services based on the ubiquitous and location-based services are emerging as an important service. The collision between the vehicle position measurement in this thesis and offers related service system. Used in the proposed system, the GPS PACKET with information about the location and time of collision for the vehicle crash, the vehicle consists of a NodeID. Cause a conflict between these data at the vehicle, the vehicle through the gateway from the server to decide whether to go on to determine that an emergency situation, Emergency Center, the location information and giving information about whether the conflict is measured. Also, for such an emergency, such as a family on the outside of the wireless terminal related to Wireless (PDA, Phone) is to let me know. The server to want to save the crash information to the database of configuration. Additionally, the proposed U-LBS system to verify the validity of the experiment was performed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1624-1630
• /
• 2019

With the increase in there are smart devices penetration around the world, services related to exercise checks are attracting attention. However, there is existing exercise amount measurement service does not use the altitude information, or because the use of an algorithm that does not corrected the GPS altitude error is not accurate movement distance provided have a problem. Therefore, in this paper, to improve the existing problems, Kalman-filter-based user movement distance measurement algorithm is designed and implementation of improved by using the Kalman-filter based GPS and barometric altimeter sensor fusion algorithm to improve the altitude value the accuracy and of calculate the coordinate plane distance. As a result of comparing the designed and implementation of algorithm with the existing algorithms, it is confirmed that the proposed algorithm improves the accuracy by about 2.17%.