• Food Science of Animal Resources
• /
• v.28 no.5
• /
• pp.667-674
• /
• 2008

This study was conducted to investigate the effects of germinated and fermented unmarketable soybean (GFS) on laying performance and egg quality in laying hens. A total of two hundred laying hens were divided into 5 groups (5 treatment $\times$ 4 replication $\times$ 10 birds each) and fed with the experimental diets for 8 wk as follows: control, GFS free; T1, GFS 0.15%; T2, GFS 0.3%; T3, GFS 1%; T4, GFS 2%. The laying performance, egg quality, blood profiles, cecal microbial population, isoflavone content in egg yolk were investigated. There were no significant differences laying performance, relative liver and spleen weights, egg yolk color, eggshell color among groups. Eggshell strength in groups fed with diets containing GFS increased, but not significantly. Eggshell thickness significantly increased in the GFS-supplemented group. No significant differences were observed in the blood profiles and intestinal microflora after supplementation. The decrease of Haugh unit during storage was alleviated by feeding of GFS (p<0.05). The concentrations of malondialdehyde in groups fed with GFS were decreased as compared with control (p<0.05). Isoflavones in the egg yolk were detected in group fed with diet containing 2% GFS. These results showed that unmarketable GFS could be used as a favorable feed additive and feedstuff for production of quality enhanced and isoflavone fortified eggs.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.739-744
• /
• 2000

The aim of this research is to investigate and to compare the shear strengthening effects of steel plates and glass fiber sheets(GFS). Shear damaged beams were repaired by steel plates and GFS. Thickness of steel plates and strengthening type of GFS were taken as the parameters. With loading, the development and propagation of cracks, failure mode and deformation of strengthening materials were checked. The ultimate load was compared with formulas proposed by previous researchers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1279-1283
• /
• 2008

Satellite Digital Multimedia Broadcasting(SDMB) needs Gap Fillers(GFs) to cover the non-service areas. However, SDMB mobile phones which are not located in GFs service area receive signals directly from the satellite because it is impossible to cover all SDMB service with GFs. Therefore, there is a border between the GFs service coverage and the satellite service coverage and it causes a time delay in signals which are from the GFs or the satellite. The time delay is the reason why SDMB service deteriorates. In this paper, I show how to reduce the deterioration of SDMB service in the border area between the GFs and the satellite adding the time delay to the satellite signal and the GFs signal. I think that this method is helpful in reducing the deterioration, especially in the early stages of SDMB service, which the GFs are not spread all over the nation yet.

• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.938-945
• /
• 2010

This study was conducted to investigate the dietary effects of germinated and fermented (with Monascus pupureus) soybean screenings (GFS) on growth performance and meat quality in broiler chicken. A total of 750 1-day-old Ross ${\times}$ Ross male broiler chicks were randomly allocated into five groups (five replications with 30 birds each) and fed experimental diets for 5 wks as follows: Group 1, negative-control (antibiotics-free diet); Group 2, positive-control (negative-control with 10 ppm of Avilamycin); Group 3, negative-control with 0.3% GFS; Group 4, negative-control with 0.5% GFS; Group 5, negative-control with 1% GFS. The final body weight of each group fed a diet containing 1% GFS was significantly higher than that of the negative-control group. The feed conversion ratios of all groups fed diets containing GFS and the positivecontrol group were significantly improved compared to the negative-control group during the whole period (p<0.05). The relative weights of various organs along with the activities of serum glutamic oxaloacetic transaminase (GOT) and glutamic pyruvic transaminase (GPT) were not influenced by the dietary treatments. The levels of total serum cholesterol in groups fed diets containing 0.5% and 1% GFS were more significantly lowered compared to those of the control groups without GFS (p<0.05). There were no significant differences in the cecal microflora profiles among the groups. Further, the dietary treatments did not influence the physico-chemical properties of the edible meat, including the shear force, pH, meat color (CIE $L^*$, $a^*$ and $b^*$), and content of malondialdehyde (MDA). Cooking loss of breast muscle in the groups fed GFS was significantly lowered compared to that of the negative control group (p<0.05). These results indicate that dietary GFS could improve growth performance in broiler chicken and may affect meat quality in some instances.

• Korean Journal of Organic Agriculture
• /
• v.19 no.spc
• /
• pp.169-173
• /
• 2011

The performance of grass filter strips (GFS) in abating $PO_4$-P concentrations from the forage cropland was tested in an experiment on the 10% slope in Grassland and Forages Division, National Institute of Animal Science, Rural Development Administration (RDA) from October 2007 to September 2009. Forage croplands with rye-corn double cropping system applied with chemical fertilizer and livestock manure (LM) were compared in a natural condition. The plots were hydrologically isolated Main plots consisted of the length of GFS, such as 0m, 5m, 10m and 15m. Sub plots consisted of the type of LM, such as chemical fertilizer (CF), composted cattle manure (CCM) and composted swine manure (CSM). Concentrations of PO4-P in surface runoff water were reduced as the length of GFS increased. Especially, GFS with 10m and 15m reduced $PO_4$-P concentrations significantly compared to that with 0m and 5m (p<0.05). The results from this study suggest that GFS improved the removal and trapping $PO_4$-P from forage croplands.

• Structural Engineering and Mechanics
• /
• v.41 no.2
• /
• pp.183-204
• /
• 2012

Several issues regarding the structural idealization of steel buildings with perimeter moment resisting steel frames (MRSFs) and interior gravity frames (GFs) are studied. Results indicate that the contribution of GFs to the lateral structural resistance may be significant. The contribution increases when the stiffness of the connection of the GFs is considered and is larger for inelastic than for elastic behavior. The interstory shears generally increase when the connections stiffness is taken into account. Resultant stresses at some base columns of MRSFs also increase in some cases but to a lesser degree. For columns of the GFs, however, the increment is significant. Results also indicate that modeling the building as planes frames may result in larger interstory shears and displacements and resultant stresses than those obtained from the more realistic 3-D formulation. These differences may be much larger when semi-rigid (SR) connections are considered. The conservativism is more for resultant stresses. The differences observed in the behaviour of each structural representation are mainly due to a) the elements that contribute to strength and stiffness and b) the dynamics characteristics of each structural representation. It is concluded that, if the structural system under consideration is used, the three-dimensional model should be used in seismic analysis, the GFs should be considered as part of the lateral resistance system, and the stiffness of the connections should be included in the design of the GFs. Otherwise, the capacity of gravity frames may be overestimated while that of MRSFs may be underestimated.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.12
• /
• pp.1312-1321
• /
• 2011

Enzyme extracts of cellulase [filter paper cellulase (FPase) and carboxymethyl cellulase (CMCase)], chitinase, and chitosanase produced by Aspergillus niger NRRL-567 were evaluated. The interactive effects of initial moisture and different inducers for FP cellulase and CMCase production were optimized using response surface methodology. Higher enzyme activities [FPase $79.24{\pm}4.22$ IU/gram fermented substrate (gfs) and CMCase $124.04{\pm}7.78$ IU/gfs] were achieved after 48 h fermentation in solid-state medium containing apple pomace supplemented with rice husk [1% (w/w)] under optimized conditions [pH 4.5, moisture 55% (v/w), and inducers veratryl alcohol (2 mM/kg), copper sulfate (1.5 mM/kg), and lactose 2% (w/w)] (p<0.05). Koji fermentation in trays was carried out and higher enzyme activities (FPase $96.67{\pm}4.18$ IU/gfs and CMCase $146.50{\pm}11.92$ IU/gfs) were achieved. The nonspecific chitinase and chitosanase activities of cellulase enzyme extract were analyzed using chitin and chitosan substrates with different physicochemical characteristics, such as degree of deacetylation, molecular weight, and viscosity. Higher chitinase and chitosanase activities of $70.28{\pm}3.34$ IU/gfs and $60.18{\pm}3.82$ to $64.20{\pm}4.12$ IU/gfs, respectively, were achieved. Moreover, the enzyme was stable and retained 92-94% activity even after one month. Cellulase enzyme extract obtained from A. niger with chitinolytic and chitosanolytic activities could be potentially used for making low-molecular-weight chitin and chitosan oligomers, having promising applications in biomedicine, pharmaceuticals, food, and agricultural industries, and in biocontrol formulations.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.6
• /
• pp.554-569
• /
• 2017

Sensitivity analysis on $PM_{10}$ forecasting simulations was carried out by using two different initial and boundary conditions of meteorological fields: NCEP/FNL (National Centers for Environmental Prediction/Final Analysis) reanlaysis data and NCEP/GFS (National Centers for Environmental Prediction/Global Forecast System) forecasting data, and the comparisons were made between two different simulations. The two results both yielded lower $PM_{10}$ concentrations than observations, with relatively lower biased results by NCEP/FNL than NCEP/GFS. We explored the detailed individual meteorological variables to associate with $PM_{10}$ prediction performance. With the results of NCEP/FNL outperforming GFS, our conclusion is that no particular significant bias was found in temperature fields between NCEP/FNL and NCEP/GFS data, while the overestimated wind speed by NCEP/GFS data influenced on the lower $PM_{10}$ concentrations simulation than NCEP/FNL, by decreasing the duration time of high-$PM_{10}$ loaded air mass over both coastal and metropolitan areas. These comparative characteristics of FNL against GFS data such as maximum 3~4 m/s weaker wind speed, $PM_{10}$ concentration control with the highest possible factor of 1.3~1.6, and one or two hour difference of peak time for each case in this study, were also reflected into the results of statistical analysis. It is implying that improving the surface wind speed fluctuation is an important controlling factor for the better prediction of $PM_{10}$ over Korean Peninsula.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.706-713
• /
• 2015

Graphite foams (GFs) were prepared by adding different amounts of mesophase pitch (MP) into polyvinyl alcohol-acrylic acid (PVA-AAc) solution followed by the heat treatment. It was confirmed that the pore diameters of GFs were controlled by the slurry concentration, which was the mesophase content added in polymer solution, and their thermal conductivity and compressive strength were also controlled by porosities of GFs formed at different conditions. The resulting GFs in this study had the highest thermal conductivity of $53.414{\pm}0.002W/mK$ and compressive strength of $1.348{\pm}0.864MPa$ at 0.69 in porosity. The thermal conductivity of MP based GFs increased approximately 23 times higher than that of using isotropic pitch based GFs due to the developed graphitic structure.

• Journal of the Korea Concrete Institute
• /
• v.25 no.6
• /
• pp.667-674
• /
• 2013

Improving the earthquake resistance of buildings through seismic retrofitting using steel braces can result in brittle failure at the connection between the brace and the building, as well as buckling failure of the braces. This paper proposes a new seismic retrofit methodology combined with glass fiber sheet (GFS) and non-compression X-brace system using carbon fiber (CFXB) for reinforced concrete buildings damaged in earthquakes. The GFS is used to improve the ductility of columns damaged in earthquake. The CFXB consists of carbon fiber bracing and anchors, to replace the conventional steel bracing and bolt connection. This paper reports the seismic resistance of a reinforced concrete frame strengthened using the GFS-CFXB system. Cyclic loading tests were carried out, and the hysteresis of the lateral load-drift relations as well as ductility capacities were investigated. Carbon fiber is less rigid than the conventional materials used for seismic retrofitting, resulting in some significant advantages: the strength of the structure increased markedly with the use of CF X-bracing, and no buckling failure of the bracing was observed.