• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.355-362
• /
• 2013

A hardware implementation of phase calculator for extracting 3D depth image from TOF(Time-Of-Flight) sensor is described. The designed phase calculator, which adopts a pipelined architecture to improve throughput, performs arctangent operation using vectoring mode of CORDIC algorithm. Fixed-point MATLAB modeling and simulations are carried out to determine the optimized bit-widths and number of iteration. The designed phase calculator is verified by FPGA-in-the-loop verification using MATLAB/Simulink, and synthesized with a TSMC 0.18-${\mu}m$ CMOS cell library. It has 16,000 gates and the estimated throughput is about 9.6 Gbps at 200Mhz@1.8V.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.8
• /
• pp.816-823
• /
• 2008

This paper describes the test results of developed high speed data processing unit using Xilinx GTP(Multi-Gigabit-Transceiver) interface and DDR-2 memory. The high speed data processing unit receives input data from packet generator at 1.25Gbps and transmits stored data to the data receiving system at 700Mbps. Therefore, DDR-2 memory controller and Xilinx GTP interface are implemented by FPGA instead of CPU to process high speed data directly.

• The KIPS Transactions:PartA
• /
• v.17A no.6
• /
• pp.275-280
• /
• 2010

In this paper, we discuss and propose an efficiently parallelized block cipher algorithm on the CELL BE processor. With considering the heterogeneous feature of the CELL BE architecture, we apply different encoding/decoding methods to PPE and SPE and improve the throughput. Our implementation was fully tested, with execution results showing achievement of high throughput, capable of supporting as high network speed as 2.59 Gbps. Compared to various parallel implementations on multi-core systems, our approach provides speedup of 1.34 in terms of encoding/decoding speed.

• The Korean Journal of Nuclear Medicine
• /
• v.26 no.2
• /
• pp.265-273
• /
• 1992

Rest gated blood pool scan (Rest GBP scan) and dipyridamole $^{99m}Tc-MIBI$ SPECT were Performed in 34 patients with or suspected coronary artery disease. Both studies were performed within $2\sim32$ days (mean 8.1 days). A significant correlation was present between left ventricular ejection fraction (r= -0.7356, p<0.001) and peak ejection rate and peak filling rate in rest GBP scan and perfusion defect in MIBI SPECT. And there were acceptable correlations (0.05$26.2{\pm}10.8%$, severe hypokinesia, akinesia or dyskinesia in 16 regions: $78.2{\pm}23.7$, p<0.001). These data indicate there is a significant coupling between the degree of myocardial perfusion and the myocardial functional change in coronary artery disease.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.817-828
• /
• 2017

It is very hard to find the system which processes single 10Gbps stream, and the related application is also rare. But in the field of science such as physics and astronomy, these high speed systems have been widely used and now more upgraded performance is expected. For this reason, high speed network based storage which captures and records 10Gbps level of packets was developed for the support of small astronomical company in KASI. But for the use of the system in research, system performance should be not only evaluated but also optimized. In this paper, we first implement system environment for the performance evaluation and discuss the experiment procedure and solution to acquire numerical results.

• Journal of Advanced Navigation Technology
• /
• v.13 no.1
• /
• pp.27-33
• /
• 2009

New optical transmission link techniques improving performance of WDM channels, each channel have bit rate of 40 Gbps, are proposed. The proposed optical link configuration consist of optical phase conjugator (OPC) placed at middle of total transmission length, and dispersion management (DM) as a role of compensating dispersion cumulated in transmission line. It is confirmed that Q-factor of total channels are improved by combining OPC and DM in optical transmission link as a result of following fact; DM not only mitigate the cumulated dispersion in total transmission line but also help OPC to compensate optical nonlinearities. And, it is confirmed that the improvement of Q-factor of overall WDM channels depends on net residual dispersion (NRD) of optical link.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.791-794
• /
• 2003

The increasing computational capability of processors is driving the need for high bandwidth links to communicate and store the information that is processed. Such links are often an important part of multi processor interconnection, processor-to-memory interfaces and Serial-network interfaces. This paper describes a 0.11-${\mu}{\textrm}{m}$ CMOS 4 Gbp s/pin 3-Level transceiver using RSL/(Rambus Signaling Logic) for high bandwidth. This system which uses a high-gain windowed integrating receiver with wide common-mode range which was designed in order to improve SNR when operating with the smaller input overdrive of 3-Level. For multi-gigabit/second application, the data rate is limited by Inter-Symbol Interference (ISI) caused by low pass effects of channel, process-limited on-chip clock frequency, and serial link distance. In order to detect the transmited 4Gbps/pin with 3-Level data sucessfully ,the receiver is designed using 3-stage sense amplifier. The proposed transceiver employes multi-level signaling (3-Level Pulse Amplitude Modulation) using clock multi phase, double data rate and Prbs patten generator. The transceiver shows data rate of 3.2 ~ 4.0 Gbps/pin with a 1GHz internal clock.

• Electronics and Telecommunications Trends
• /
• v.9 no.4
• /
• pp.23-34
• /
• 1994

직렬 접속 프로토콜은 두개 이상의 근거리 시스템간의 정보 교환에 사용된다. 현재까지 공식적인 기관에서 표준화되어 제정된 직렬 접속 규격들이 가지고 있는 성능은 전송 속도 측면에서 수 kbps에서 최대 10Mbps급에 한정되어 있는 관계로 수백 Mbps 혹은 수 Gbps급에 달하는 직렬 접속 프로토콜 성능을 요구하는 고성능 통신 및 정보 처리 시스템을 위한 새로운 직렬 접속 규격이 요구되고 있다. IEEE에서 표준화 작업중인 Multi-CPU 병렬 시스템을 위한 접속 규격인 P1355 접속 규격은 경제적이며 용이한 확장성을 가지는 칩과 칩간외에 보드와 보드간 혹은 랙과 랙간의 연결이 가능한 표준 규격안이다. P1355 접속 프로토콜은 특성이 서로 다른 DS, TS, HS link 규격들로 구성되어 있으며 이들은 선로 동작 속도 측면에서 각각 200Mbps, 250Mbps, 1Gbps의 성능을 가지고 있으며, 사용되는 데이터 심볼의 코딩 방식, 접속로 동작 초기화 및 오류 제어, 접속로의 물리적 성능 및 규격 등에서 차이를 가지고 있다. P1355는 일반적인 통신용 전송 선로에서 요구되는 물리 계층의 BER 성능보다 $10^5$에서 $10^10$배 향상된 선로 BER 특성과 이러한 하위 계층 특성을 바탕으로한 패킷 손실이 없는 간결한 상위계층 프로토콜을 특징으로 하며, 차세대 통신 수단인 ATM교환기 시스템의 서브 시스템 접속 규격으로 사용될 수 있다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.800-807
• /
• 2003

Decomposition of tasks in the ordinary manufacturing systems is usually based on the predefined goal of the system. To achieve the high-level-goals (e.g., factory goal or company goal), several sub-goals should be achieved in advance. However, goals can change along with the current status of the system and the external environmental situations. Thus, a manufacturing system should support the goal-formations which can be bearable these changes for efficient and effective operations. Therefore, it IS necessary to develop a systematic methodology for the goal-formations in a manufacturing system. Especially, the formation and/or change of goals in real-time should be possible for distributed and dynamic systems including the fractal manufacturing system (FrMS). In this paper, a threefold methodology is proposed for the goal-formation process (GFP) in the FrMS; 1) a goal­generating process (GGP) to make and propagate fuzzy goals, 2) a goal-harmonizing process (GHP) to eliminate or reduce conflicts and interferences of goals by using a mobile agent- based negotiation scheme, and 3) a goal-balancing process (GBP) to make a compromise between goals by using quantifiable indicators of the manufacturing system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.1-9
• /
• 2011

Nowadays it is necessary to replace electrical wires with another intelligent connection method because the consumers, who have much experience with mobile smart devices, are expecting easier and smarter connectivity in their home electronics such as wireless linking. In this paper a bidirectional CEC control scheme is newly proposed to expand the controllability from one to two way in a millimeter band image transmission system because two degree of freedom controllability presents more intelligent convenience in HDMI interface systems. Experimental study shows the feasibility of the proposed system as an advanced image transmission solution in millimeter band including an intelligent 2 DOF CEC interface with the performance result of 3.0 Gbps transmission band for 1080p full-HD image steaming.