• Textile Coloration and Finishing
• /
• v.10 no.2
• /
• pp.29-36
• /
• 1998

Poly(L-lactide) microcapsules containing hydrophilic penetrate were prepared by interfacial precipitation method through solvent evaporation from w/o/w emulsion. Effect of four determinative process parameters on the particle size distributions, morphologies, and release properties of microcapsules coated with poly(L-lactide) was investigated. Moreover, susceptible functional cotton fabrics treated with the mentioned microcapsules were prepared and laundry test up to 15 times were done to determine fastness properties. As a result, the prepared poly(L-lactide) microcapsules with a more sharp-distributive, rounder, and more permeable membranes could be prepared by means of protective colloid concentration, solution volume and stirring rate.

• Textile Coloration and Finishing
• /
• v.18 no.3 s.88
• /
• pp.31-41
• /
• 2006

Functional properties are available with sputtering. But sputtering treatment alone cannot got a good fastness performance to washing, rubbing and light. This research was objected to investigate optimum condition by sputtering on polyester through various processing conditions such as ion current and treatment time, and then various resin treated onto metal coated polyester fabrics in order to increase washing fastness of metal membrane. As the results, the optimum conditions revealed 1500 mA of ion current, 2 min of treatment time in sputter, and suitable resin concentrations were 2% of o.w.s (on the weight of solution) in resin treatment. Therefore, we could get enhanced anti-static effect and flex stiffness as well as washing fastness in sputtered polyester fabric with various resin treatment, for example, melamine and polyurethane.

• Science of Emotion and Sensibility
• /
• v.10 no.3
• /
• pp.367-372
• /
• 2007

This study surveys the silk sensitivity technology of nylon filament using fluid system. For this purpose, taslan texturing ATY m/c is modified and 4 kinds of nylon filaments with 40d/12f are made using functional chemicals on the modified ATY texturing machine. Using these yarns, 4 kinds of fabrics are woven and processed on the dyeing and finishing. The various physical properties of these fabrics such as water contents, UV-cut, fabric hand are measured and discussed with ATY texturing and functional chemical treatment conditions.

• Textile Coloration and Finishing
• /
• v.8 no.1
• /
• pp.73-82
• /
• 1996

The photochromic dye(spiroxazine, Blue) as a susceptible material was synthesized by condensing 1-nitroso-$\beta$-naphthol with indoline. The melting point of the synthesized spiroxazine dye was 254$^{\circ}C$. Irradiation with ultraviolet light had effect on reversible coloration reaction. The photochromic dye microcapsules were produced by in situ polymerization using urea-formaldehyde prepolymer. The average diameter of the microcapsule was 2.94$\mu$m. The dyeability and washing fastness of the photochromic microcapsule fibers were increased by the pretreatment of cationic agent.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.97-104
• /
• 1995

The photochromic dyes(spiroxazine) as a susceptible material were synthesized by condensing 1-nitroso-$\beta$-naphthol with piperidine. The melting point of the synthesized spiroxazine dye was 245$^{\circ}C$. Irradiation with ultraviolet light had effect on reversible coloration reaction. The photochromic dye microcapsules were produced by interfacial precipitation method using polyvinylalcohol and ethylcellulose. The average diameter of microcapsules was 5.4$\mu$m. The dyeability and fastness of dyeings of the microcapsule fibers were increased by pretreatment of the cationic agent.

• Journal of Korean Academy of Nursing
• /
• v.37 no.1
• /
• pp.52-63
• /
• 2007

Purpose: Effective communication is an essential aspect of nursing care. This qualitative study was performed to analyze nurse-patient conversations about medication. Method: The nurse-patient dialogue was collected by video tape recording during the nurse's duty time in an internal medicine ward. One hundred seventy-eight episodes were extracted from the conversation. Using conversational analysis, the functional phases and patterns of dialogue sequence pertaining to medication were analyzed. Results: Conversations about medication were very brief dialogues, so 68.8% of the dialogue had a duration of less than 20 seconds. However, it was a systematic and comprehensive dialogue which had structures and sequential dialogue patterns. Four functional phases were explored. greeting, identifying the patient, medicating, finishing. The medicating phase was essential, in which the nurse gave the drug to the patient and provided information initiated by the nurse simultaneously. The patterns of the dialogue sequence represented were the nurse provided information first, and then, patients responded to the nurse as accepting, rejecting, raising an objection, or asking again later. Conclusion: As the results of this study show, a nurse's role is important as an educator. For effective conversation about medication, the development of an educational program should be considered, which includes knowledge about medication and communication skills.

• Textile Coloration and Finishing
• /
• v.11 no.2
• /
• pp.27-37
• /
• 1999

Polypropylene(PP) films were treated with plasma glow discharge to produce peroxy radicals on the surfaces. The peroxy radicals formed on the PP film surfaces were subsequently used for the graft polymerization of acrylic acid and acrylamide in an aqueous solution by heating, respectively. Introduction of acrylic acid and acrylamide on the PP film could be confirmed by the observation of carbonyl and primary amine absorptions based on carboxylic acid and amide, respectively. And introduction of functional group could be confirmed by weight analysis and ESCA. The water contact angle(90$^{\circ}$) of PP film was constant, irrespective of elapsed time, while plasma-treated and functional monomer-grafted PP films were slowly increased with elapsed time, showing the rearrangement of surface polar groups in air condition. The water contact angle$(90^\circ)$ of PP film was decreased by the plasma treatment$(56^\circ)$ and further decreased by the grafting of acrylic acid$(34^\circ)$ and acrylamide$(37^\circ)$, indicating increased hydrophilicity of the modified surfaces. The water contact angle of plasma-treated PP film increased a little as time elapsing. The half-life periods of surface voltage on acrylic acid-(31sec) and acrylamide-grafted PP(42sec) were significantly decreased when compared to those on PP(950sec) and plasma-treated PP film(241sec). In the experiments using acid, basic and disperse dyes, absorbance and $\Delta{E}$ values of functional monomer-grafted PP films were significantly increased than that of oxygen plasma-treated one.

• Textile Coloration and Finishing
• /
• v.19 no.2
• /
• pp.32-35
• /
• 2007

Cyclodextrin is a cyclic oligosaccharid material which shows an ability to incorporate organic guest molecules inside their cavity area. Thus, this ${\beta}-cyclodextrin$ treatment on fiber substrates may provide the changed surface characteristics of the substrates such as solubility, chemical reactivity and spectral property. In this context, the aim of this present work is to make a bridge connection using hetero-bi-functional reactive dye between fiber substrates and ${\beta}-cyclodextrin$. In addition, the corresponding Berberine inclusion behaviors into the inner cavity of ${\beta}-cyclodextrin$ was examined. The %exhaustion of Berberine inclusion as a guest molecule within the ${\beta}-cyclodextrin$ was measured using UV-Vis spectrophotometer. The findings showed that the %exhaustion of Berberine inclusion increased with increasing the prepared dye bridge compound and ${\beta}-cyclodextrin$ host material.

• Korean Journal of Human Ecology
• /
• v.9 no.4
• /
• pp.41-53
• /
• 2006

The purpose of this study was to compare the characteristics of underwear consumer's underwear purchasing behavior through survey. 630 questionnaires were distributed in Seoul and Chonju and 618 with usable data were analyzed frequency and factor analyses, t-test etc. using SPSSWIN 10.0. program. The results were summarized as follows : Most male consumers buy underwears at discount stores whereas most female consumers at chain store. Throughout all four seasons, more male and female consumers do not wear heat-retaining underwears. Most male and female consumers do not have function-fiber underwears nor functional-finishing and natural-dyeing-treated underwears. Most consumers are not satisfied with these underwears. The most important criteria for most male consumers to choose underwears are comfort levels while in action, the sense of touch, comfort levels while wearing them while not in action, pleasance levels; whereas for females are comfort levels while in action, and comfort levels while wearing them while not in action. Male consumers prefer a little bigger-than-their-bodies size, dry and soft fabrics, plain white color; whereas female consumers prefer a little tight size, dry and soft fabrics and plain beige color, Most consumers want to buy functional-fiber underwears made of yellow- soil-and-charcoal-dyeing fabrics which has jade.

• Elastomers and Composites
• /
• v.57 no.3
• /
• pp.100-106
• /
• 2022

Waterborne polyurethane-acrylate(WPUA) dispersions were prepared by surfactant-free emulsion polymerization in a two-step process. In the first step, polytetrahydrofuran, isophorone diisocyanate, dimethylol proponic acid, and 2-hydroxyethyl methacrylate were used to synthesize a vinyl-terminated polyurethane prepolymer. In the second step, styrene, methyl methacrylate, butyl acrylate, and different multi-functional crosslinkers were copolymerized. 1,6-hexanediol diacrylate, trimethylolpropane triacrylate, and pentaerythritol tetraacrylate were used as the crosslinkers, and their effect on the mechanical and thermal properties of WPUA was investigated. Overall, as the number of functional groups of the cross-linker increased, the gel fraction improved to 79.26%, the particle size increased from 75.9 nm to 148.7 nm, and the tensile strength was improved from 5.86 MPa to 12.40 MPa. In thermal properties, the glass transition temperature and decomposition temperature increased by 9.9℃ and 18℃, respectively. The chemical structures of the WPUA dispersions were characterized by Fourier-transform infrared spectroscopy. The synthesized WPUA has high potential for applications such as coatings, leather coatings, adhesives, and wood finishing.