• Journal of radiological science and technology
• /
• v.39 no.2
• /
• pp.227-236
• /
• 2016

Dynamic positron emission tomography(dPET) is widely used medical imaging modality that can provide both physiological and functional neuro-image for diagnosing various brain disease. However, dPET images have low spatial-resolution and high noise level during spatio-temporal analysis (three-dimensional spatial information + one-dimensional time information), there by limiting clinical utilization. In order to overcome these issues for the spatio-temporal analysis, a novel computational technique was introduced in this paper. The computational technique based on singular value decomposition classifies multiple independent components. Signal components can be distinguished from the classified independent components. The results show that signal to noise ratio was improved up to 30% compared with the original images. We believe that the proposed computational technique in dPET can be useful tool for various clinical / research applications.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.432-439
• /
• 2018

Metal catalysts such as Fe, Co, Mn, and Pd supported on the activated carbon (AC) were prepared to improve functional groups for the chemical adsorption and catalytic ozonation. Following ascending orders of the phenol decomposition rate, dissolved ozone decomposition ratio and TOC (total organic carbon) removal from experimental results of advanced oxidation process (AOP) were observed: Fe-AC < AC < Co-AC < Mn-AC < Pd-AC. BET analysis results showed that the physical properties of the metal impregnated activated carbon had no effect on the catalytic ozonation, and the catalytic effect was dependent on the kind of impregnated metal. The ratio of the formed concentration of OH radical to that of ozone (RCT) was measured by using the decomposition outcome of p-chlorobenzoic acid, a probe compound that reacts rapidly with OH radical but slowly with ozone. The measured values of RCT were $5.48{\times}10^{-9}$ and $1.47{\times}10^{-8}$ for the ozone alone and activated carbon processes, respectively, and $2.13{\times}10^{-9}$, $1.51{\times}10^{-8}$, $4.77{\times}10^{-8}$, and $5.58{\times}10^{-8}$ for Fe-AC, Co-AC, Mn-AC, and Pd-AC processes, respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.165-173
• /
• 2019

Hydrazine[$N_2H_4$] is a typical propellant for a rocket fuel in the field of aerospace. Since it is very toxic and harmful to the environment, various environmentally-friendly propellants have been developed. In this study, relatively a safe propellant, hydroxylammonium nitrate[$NH_3OHNO_3$], was prepared via a neutralization reaction of hydroxylamine[$NH_2OH$] and nitric acid[$HNO_3$]. FT-IR was used to analyze the chemical composition, chemical structure and functional groups of HAN. Thermogravimetric analysis showed the decomposition temperature of HAN. Ion chromatography was also used to evaluate the content of nitrate ions. It was proved that the peaks of FT-IR at $3161cm^{-1}$ and $1324cm^{-1}$ indicates the functionalities of N-H and N-O present in HAN. The decomposition temperature of HAN synthesized at pH 5 to 7 was $120-140^{\circ}C$, and pH 8 resulted in higher decomposition temperature than $140^{\circ}C$. Meanwhile, the sample obtained from pH 6-7 showed the concentration of nitric acid ion with 70%.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.270-274
• /
• 2017

Formic acid has been known as one of key sources of hydrogen. Among various monometallic catalysts, hydrogen can be efficiently produced on Pd catalyst. However, the catalytic activity of Pd is gradually reduced by the blocking of active sites by CO, which is formed from the unwanted indirect oxidation of formic acid. One of promising solutions to overcome such issue is the design of alloy catalyst by adding other metal into Pd since alloying effect (such as ligand and strain effect) can increase the chance to mitigate CO poisoning issue. In this study, we have investigated formic acid deposition on the bimetallic $Pd/Pd_3Fe$ core-shell nanocatalyst using DFT (density functional theory) calculation. In comparison to Pd catalyst, the activation energy of formic acid dehydrogenation is greatly reduced on $Pd/Pd_3Fe$ catalyst. In order to understand the importance of alloying effects in catalysis, we decoupled the strain effect from ligand effect. We found that both strain effect and ligand effect reduced the binding energy of HCOO by 0.03 eV and 0.29 eV, respectively, compared to the pure Pd case. Our DFT analysis of electronic structure suggested that such decrease of HCOO binding energy is related to the dramatic reduction of density of state near the fermi level.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.3
• /
• pp.119-125
• /
• 2016

Fresh-cut agricultural products provide convenience to consumers. However, quality changes or microbial growth can easily occur due to physical changes such as cutting and peeling etc. during processing. Therefore, efforts have been made to develop a functional packaging for extension of shelf life of fresh-cut agricultural products, food etc., and researches on prolongation of storage period have been actively developed. The shelf life is extended by antimicrobial, far infrared rays, air permeability, anti-fogging, weak current, ethylene gas adsorption or decomposition, gas composition changes such as MA (Modified Atmosphere) or CA (Controlled Atmosphere). The method of extending the shelf life by various complex factors. This paper based on the published literature to extend the shelf life of fresh-cut agricultural products, food etc., The paper has summarized the storage period extension packing method, packaging material for shelf life extension and comprehensive evaluation method.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.198-203
• /
• 2005

Melt extrusion foaming process for the preparation of poly(L-lactic acid) (PLLA) scaffolds was carried out and the effects of foaming conditions on the pore structure of PLLA scaffolds and their mechanical properties were investigated. The porosity and mechanical properties of fabricated scaffolds were compared with the scaffolds obtained from the salt leaching method as well. It was found that the optimum pore structure was achieved when the PLLA melt was kept in extruder for the maximum decomposition time of blowing agent. In order to maintain the proper scaffolds structure, the blowing agent content should be less than $10\;wt\%$. It can be concluded that melt extrusion foaming process allows for the production of scaffold having higher mechanical properties with reasonable pore size and open cell structure for hard tissue regeneration even though it has less porosity than scaffolds made by salt leaching process.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.91-97
• /
• 2003

The effect of fluorination of nanoscaled silicas on mechanical interfacial properties and thermal stabilities of the silica/polyurethane composites was investigated. The surface properties of the silica were studied in X-ray photoelectron spectroscopy and contact angle measurements. Their mechanical interfacial properties and thermal stabilities of the composites were characterized by tearing energy and decomposition activation energy, respectively. As experimental results, the London dispersive component of surface free energy and fluorine functional groups of silica surfaces were increased as a function of fluorination temperature resulting in improving the trearing energy ($G_{IIIC}$) of the composites. Also, the thermal stabilities of the composites were increased as the treatment temperature increases. These results could be explained that the fluorine functional groups on silica surfaces played an important role in improving the intermolecular interactions at interfaces between silicas and polyurethane matrix in a composite system.

• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.1071-1078
• /
• 2005

Use case modeling is a widely used technique for functional requirements analysis of business system but it is difficult to identify a use cases at the right level and use case specifications are too long and confusing. It is also hard to determine a functional decomposition Phases·s of use cases. Therefore customer doesn't understand the use cases. This paper is defining concept of the Information Structure Modeling(ISM) and analyzing business system for the customer's perspective. ISM is an efficient mechanism for analyzing user requirements and for Identifying objects in a business system using Attribute Structure Diagram which is a major tool of the ISM that describes user event. This paper is also to show how the classes are classified and derived as event-asset-transaction type in ISM. It provides a user-friendly approach to visually representing business model.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.387-392
• /
• 2005

For the production of further functional bio-degradable plastic(polybutylene succinate:PBS) with $TiO_{2}$ as photocatalyst, which shows the decomposition of detrimental organic compound and pollutant under ultraviolet irradiation, we attempted to prepare $TiO_{2}$ coatings on PBS substrate by HVOF and plasma spraying techniques under various conditions. The microstructures of coatings were characterized with SEM and XRD analysis, and the photocatalytic efficiency of coatings was evaluated through the photo degradation of gaseous acetaldehyde. The effects of primary particle size and spraying parameters on the formation behavior, photo catalytic performance and mechanical characteristics of the coatings have been investigated. The results indicated that with respect to both the HVOF sprayed $P_{200}$ and $P_{30}$ coatings, the high anatase ratio off 100% can be achieved regardless of fuel gas pressure. On the other hand, the HVOF sprayed $P_{7}$ coating exhibited largely decreased anatase ratio (from 100% to 49.1%) with increasing the fuel gas pressure, which may be attributed to the much higher susceptibility to heat of 7nm agglomerated powder. In terms of photocatalytic efficiency, HVOF sprayed $P_{200}$ and $P_{30}$ coatings seem to predominate as compared to that of plasma sprayed $P_{200}$ coatings owing to the higher anatase ratio. However, the HVOF sprayed $P_{7}$ coatings didn't show the photo catalytic activity, which may result from the extremely small reaction surface area to the photo-catalytic activity and low anatase ratio. Such functional PBS with new roles is expected to cosiderably contribute to the reduction of aggravated environmel problem.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.3
• /
• pp.177-183
• /
• 2013

As the development of available binder in the harsh conditions is needed, we propose the proper binder for high-voltage lithium-ion secondary batteries based on the quantum chemistry modeling. The optimized structures, HOMO (Highest Occupied Molecular Orbital) energies and ionization potentials of 4 binders, which were considered from monomer to tetramer, were investigated by the semi-empirical and DFT (Density Functional Theory) calculations. The results show that the ionization potential values by calculation tend to be close to the oxidation potentials from the measurement of linear sweep voltametry (LSV). The order of oxidative resistance from high value to low value is following: poly(hexafluropropylene), poly(vinylidene fluoride), poly(methyl acrylate) and poly(acryl amide). Also these results correspond with the experimental values. Thus, we find the reason why HOMO (Highest Occupied Molecular Orbital) energy of PHFP has the highest value than other binders by analysis of HOMO orbital structures.