• 환경영향평가
• /
• 제22권6호
• /
• pp.713-724
• /
• 2013

In terms of waste load allocation, inequality of waste load discharge must be considered as well as economic aspects such as minimization of waste load abatement. The inequality of waste load discharge between areas was calculated with Gini coefficient and was included as one of the objective functions of the multi-objective waste load allocation. In the past, multi-objective functions were usually weighted and then transformed into a single objective optimization problem. Recently, however, due to the difficulties of applying weighting factors, multi-objective genetic algorithms (GA) that require only one execution for optimization is being developed. This study analyzes multi-objective waste load allocation using NSGA-II-aJG that applies Pareto-dominance theory and it's adaptation of jumping gene. A sensitivity analysis was conducted for the parameters that have significant influence on the solution of multi-objective GA such as population size, crossover probability, mutation probability, length of chromosome, jumping gene probability. Among the five aforementioned parameters, mutation probability turned out to be the most sensitive parameter towards the objective function of minimization of waste load abatement. Spacing and maximum spread are indexes that show the distribution and range of optimum solution, and these two values were the optimum or near optimal values for the selected parameter values to minimize waste load abatement.

• ETRI Journal
• /
• 제33권2호
• /
• pp.184-193
• /
• 2011

Tailored for wireless local area networks, the present paper proposes a cross-layer resource allocation scheme for multiple-input multiple-output orthogonal frequency-division multiplexing systems. Our cross-layer resource allocation scheme consists of three stages. Firstly, the condition of sharing the subchannel by more than one user is studied. Secondly, the subchannel allocation policy which depends on the data packets' lengths and the admissible combination of users per subchannel is proposed. Finally, the bits and corresponding power are allocated to users based on a greedy algorithm and the data packets' lengths. The analysis and simulation results demonstrate that our proposed scheme not only achieves significant improvement in system throughput and average packet delay compared with conventional schemes but also has low computational complexity.

• 한국항해학회지
• /
• 제8권1호
• /
• pp.1-16
• /
• 1984

The economical property of a shipping enterprise, as well as other transportation industries, is determined by the difference between the freight earned and expense paid. This study can be regarded as a division of optimizing ship allocation to routes under the integrated port transport system. Fleet planning and scheduling require complicated allocations of cargoes to ships and ships to routes in order to optimize the given criterion function for a given forecast period. This paper deals with the optimum ship allocation problem minimizing the operating cost of ships in a shipping company. Optimum fleet operating for a shipping enterprise is very important, since the marine transportation is a form of large quantity transport requiring long-term period, and there is a strong possibility to bring about large amount of loss in operation resulting from a faulty ship allocation. Where there are more than one loading and discharging ports, and a variety of ship's ability in speed, capacity, operating cost etc., and when the amount of commodities to be transported between the ports has been determined, then the ship's schedule minimizing the operating cost while satisfying the transport demand within the predetermined period will be made up. First of all a formula of ship allocation problems will be established and then will be constructed to solve an example by the Integer Programming application after consideration of the ship's ability, supply and demand of commodity, amount of commodity to be transported, operating costs of each ship etc. This study will give good information on deciding intention for a ship oprator or owner to meet the computerization current with shiping management.

• 대한임베디드공학회논문지
• /
• 제18권4호
• /
• pp.195-201
• /
• 2023

The degree of contribution each sensor makes towards the total information gathered by all sensors is not uniform in spatially correlated sensor fields. Considering bit allocation problem in such a spatially correlated sensor field, the number of bits to be allocated to each sensor should be proportional to the degree of contribution the sensor makes. In this paper, we deploy Shapley value, a representative solution concept in cooperative game theory, and utilize it in order to quantify the degree of contribution each sensor makes. Shapley value is a system that determines the contribution of an individual player when two or more players work in collaboration with each other. To this end, we cast the bit allocation problem into a cooperative game called bit allocation game where sensors are regarded as the players, and a payoff function is given in the criteria of mutual information. We show that the Shapley value fairly quantifies an individual sensor's contribution to the total payoff achieved by all sensors following its desirable properties. By numerical experiments, we confirm that sensor that needs more bits to cover its area has larger Shapley value in spatially correlated sensor fields.

• 한국정보처리학회논문지
• /
• 제6권8호
• /
• pp.2196-2203
• /
• 1999

본 논문은 데이터패스 합성에서의 버스 스케줄링 문제와 레지스터의 최적화 방법을 다룬 것이다. 스케줄링은 DFG(Data Flow Graph)의 연산을 제어스텝(control step)에 할당하는 과정으로서, 주어진 조건을 만족하는 범위 내에서 비용함수(cost function)의 최소화에 목적을 둔다. 이를 위해 본 논문에서는, 연산자 배치를 위한 하드웨어 할당(hardware allocation) 과정에서의 설계비용을 최소화시키기 위해, 연산결과를 저장하는 레지스터(register)와 연산간의 이동 통로인 버스(bus)의 최적화 기법을 논하였다. 특히, 하드웨어 할당과정의 중요한 과제인 버스와 레지스터의 최소화 기법을 논하였으며, 레지스터의 최적화는 스케줄링이 완료된 후의 결과를 이용하였다. 실험대상으로는 벤치마크 모델인 5차 디지털 웨이브필터(5th-order digital wave filter)를 사용하였으며, 본 논문의 결과를 기존결과와 비교함으로써, 본 논문의 효용성을 입증하였다. 모든 실험결과는 구조형태의 선형정수계획법(ILP : Integer Linear Programming)을 이용함으로써, 모든 경우에 언제나 최적의 결과를 얻을 수 있도록 하였다.

• 한국자동차공학회논문집
• /
• 제15권3호
• /
• pp.63-71
• /
• 2007

During the design phase of a product, reliability and design engineers are called upon to evaluate the reliability of the system, The question of how to meet target reliability for the system arises when estimated reliability or cost is inadequate. This then becomes a problem of reliability allocation and system structure design. This study proposes the optimization methodology to achieve target reliability with minimum cost through construction of the cost function of system. In cost function, total cost means the sum of initial cost, repair cost and maintenance cost. This study constructs optimization problem about system structure design and reliability allocation using cost function. This problem constructed is solved by Multi-island Genetic Algorithm(MIGA), and applies to urban transit brake system. Current brake system of the urban transit is series system. Series system is the simplest and perhaps one of the most common system, but it demands high reliability and maintenance cost because all components must be operating to ensure system operation. Thus this study makes a comparative study by applying k-out-of-n system to brake system. This methodology presented can be a great tool for aiding reliability and design engineers in their decision-makings.

• 한국군사과학기술학회지
• /
• 제14권3호
• /
• pp.501-508
• /
• 2011

In this paper, we propose a channel allocation algorithm of MSAP(Mobile Subscriber Access Point) and data delivery scheme exploiting the symbol level network coding. The network is comprised of TS(Tactical Switch) as a backbone node, MSAPs, and TMFTs(Tactical Multi-Function Terminal). The TS performs the channel allocation considering the communication range overlapping between the neighboring MSAPs and applies the symbol level network coding, if necessary, depending on the position of the TMFTs. Assuming the number of available antennas of TMFT and MSAP will be extended to two from one, we propose two schemes: single mode and dual mode. Through the simulation, we show that the proposed delivery scheme provides higher delivery ratio and lower delivery delay compared with the legacy store-and-forward scheme.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.531-534
• /
• 2003

A model using a nonlinear programming technique was applied for allocating the optimal water depending on storage level changes of the Sumjin dam. The objective function of optimization model was set up to maintain the storage at target level, to satisfy the water demand, and to maximize the hydropower production. In this way, the water allocation as to target level and instream flow was optimized and compared with historical operational data.

• 대한조선학회논문집
• /
• 제57권1호
• /
• pp.45-51
• /
• 2020

In this study, we developed an allocation optimization system for supply chain management in the shipbuilding and offshore construction industry. Supply chain operation is a way of operating manufacturing company responsible for the procurement of outfitting parts. The method about how to allocate the manufacturing volume to each partner company includes important decisions. According to the allocation method, the stability of the material supplied to the final installation process is guaranteed. We improved the allocation method that was previously decided by the person in charge. Based on the optimization engine, a system is developed that can automatically allocate the production volume. For optimization model configuration, factors affecting the volume allocation were analyzed and modeled as constraint factors. A target function is defined to minimize the difference in the load variance of each partner company. In order to use the same type of volume allocation engine for various outfitting products, the amount of work done by the partner company was standardized. We developed an engine that can allocate the same production load of each production partner. Using this engine, the operating system was developed and applied to the actual offshore project. It has been confirmed that the work load variance of suppliers can be maintained uniformly using the optimization engine rather than manual method. By this system, we stabilize the manufacturing process of partner suppliers.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.220-227
• /
• 2018

The cooperative game theory consists of a set of players and utility function that has positive values for a subset of players, called coalition, in the game. The purpose of cost allocation method is to allocate the relevant cost among game players in a fair and rational way. Therefore, cost allocation method based on cooperative game theory has been applied in many areas for fair and reasonable cost allocation. On the other hand, the desirable characteristics of the cost allocation method are Pareto optimality, rationality, and marginality. Pareto optimality means that costs are entirely paid by participating players. Rationality means that by joining the grand coalition, players do not pay more than they would if they chose to be part of any smaller coalition of players. Marginality means that players are charged at least enough to cover their marginal costs. If these characteristics are all met, the solution of cost allocation method exists in the core. In this study, proportional method is applied to EOQ inventory game and EPQ inventory game with shortage. Proportional method is a method that allocates costs proportionally to a certain allocator. This method has been applied to a variety of problems because of its convenience and simple calculations. However, depending on what the allocator is used for, the proportional method has a weakness that its solution may not exist in the core. Three allocators such as demand, marginal cost, and cost are considered. We prove that the solution of the proportional method to demand and the proportional method to marginal cost for EOQ game and EPQ game with shortage is in the core. The counterexample also shows that the solution of the proportional method to cost does not exist in the core.