• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.99-110
• /
• 2012

Inclined Earth Retaining Structure Method (IER method, briefly) is developed in order to improve the existing earth retaining method. In IER method, there are three main structures, front support, back support, and head binding. Especially, back support acts the role that reduces the earth pressure acting on the front support. In this study, the stability according to the installation angle and stiffness of front or back support is analysed by model tests. By the test results, it is known that inclined back support is very effective to reduce the earth pressure acting on the front support. Especially, the effect of the stiffness and installation angle of back support is analysed.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.3
• /
• pp.71-83
• /
• 2016

This study attempted to analyze trends of structural changes in the front middle part of men's underwear and get basic data for the development of men's underwear patterns. In terms of a research method, the structure and pattern of the front middle part of men's underwear were analyzed by referring to the design and description of the drawing, focusing on men's underwear which targeted to isolate penis from scrotum among the 'men's underwear' or 'functional men's underwear'-related patents. According to the study, three topics were obtained as follows: a support attached to the inside of the front middle part; inner cloth attached to the inside of the front middle part; change in the structure of the front middle panel. The aspects by the specific topic targeted to isolate penis from scrotum and prevent the scrotum from adhered to a thigh are as follows: 1) When a support is attached to the inside of the front middle part, the following three methods are proposed: Penis isolated from scrotum by a rest which is designed using the band; penis and scrotum rested in the band and in a pocket respectively; protruded rest inside the front middle part of the underwear. 2) When an inner cloth is attached to the inside of the front middle part, the following methods are designed: A pocket-type inner cloth is attached; isolation of penis hole from the scrotum pocket using a rectangular separator; U-shaped pocket designed to rest penis and scrotum is attached. 3) Regarding change in the structure of the front middle panel, the integration of penis and scrotum resting parts can be divided into two cases: Securing a space using wrinkles; keeping it voluminous using the vertical line. In this all-in-one penis and scrotum-holding type, in addition, different front panel patterns were applied.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.2
• /
• pp.115-121
• /
• 2009

A layout design of an excavator front is a coupled design. Parameters of the layout design are coupled each other. So it is difficult to make decisions to set the parameters of the layout of an excavator front. We analyze the parameters of the layout design of an excavator front. We regroup the parameters as interface groups. And we suggest a new design process which is based on the interface groups. And we redesign user-interfaces of the Knowledge based Excavator Design System(KEDS).

• Korean Institute of Interior Design Journal
• /
• v.16 no.3 s.62
• /
• pp.66-75
• /
• 2007

In this study, by comparing the development and the space types of local and foreign flexible apartments, basic data will be derived for the development of various flexible types of apartments in Korea. A total of 60 unit plans, including 30 domestic cases and 30 overseas cases of flexible apartments, are analyzed for this study. In terms of the unit plan types, Korean apartments usually had a wide front bay with shallow depth, placing more rooms on the front bay; whereas foreign apartments tend to have various unit plan types: (1) a narrow front bay with deep depth, (2) a wide front bay with shallow depth, and (3) variegated open-plan types. Many apartments in foreign countries had a double-layered structure with the. upstairs and downstairs areas. In terms of the flexible types, many Korean apartments achieved interior flexibility using non-bearing wall or sliding doors; whereas foreign apartments had a flexible space by separating the support elements and the infill elements. There was found to be a close relationship between the location of support elements and the variability of unit plans. Support elements can be placed largely into three locations: (1) Between the front side bay and the rear side bay, (2) in the center bay of a unit plan, and (3) others. Depending on the location of support elements, various types of flexible unit plans can be created. Through a comparative analysis of domestic and foreign apartments, basic data that can be used for developing various flexible unit plans was derived.

• Communications of the Korean Mathematical Society
• /
• v.11 no.1
• /
• pp.273-280
• /
• 1996

In this paper we extend the concept of the Sobolev wave front set of a distribution to the one of the generalized Sobolev wave front set of a generalized distribution, and we investigate the relations among these concepts. Finally, we prove the local property of these sets.

• Journal of the Korean Institute of Navigation
• /
• v.23 no.4
• /
• pp.63-76
• /
• 1999

This paper aims at developing an integrated fleet management support system for industrial carriers who usually control the vessels of their own or on a time charter to minimize the cost of shipping their cargoes. The work is mainly concerned with the operational management problem of the fleet owned by a major oil company, a typical industrial carrier. The optimal fleet management problem for the major oil company can be divided into two phase problem. The front end corresponds to the production operation problem of the transportation of crude oil, the refinery operation, and the distribution of product oil to comply with the demand of the market. The back end is to tackle the fleet scheduling problem to meet the seaborne transportation demand derived from the front end. Relevant optimization models for each phase are proposed and described briefly. Then a user-friendly integrated fleet management support system is built based on the proposed optimization models for both ends under Windows environment. A case study reflecting the practices of fleet management problem for the major oil company is carried out by using the system.

• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.40-45
• /
• 2018

Recently, in construction equipment machinery production, development has focused on environmentally-friendly functions to improve existing production capacity. For excavators as well, emphasis has been placed on response to environmental regulations, miniaturization, and noise reduction, while technology is being developed considering cost reduction and safety.Accordingly, the front support, an inner reinforcement part of the excavator, as well as high-strength steel plates to improve safety and reduce weight, are being applied.However, in the case of high-strength materials, Springback occurs in the final formed part due to high residual stress during product forming. Derivation of a forming or product shaping process to reduce springback is needed. Accordingly, regarding the front support, an inner reinforcement part of the excavator, this study derived a method to improve springback and secure shape stiffness through analysis of the springback occurrence rate and springback causes through a forming analysis.As for the results of analyzing the springback occurrence rate of existing products through forming analysis, springback of -22.6 mm < z < 27.35 mm occurred on the z-axis, and it was confirmed that springback occurred due to the stiffness reinforcing bead of the upper and middle parts of the product.To control product residual stress and springback, we confirmed a tendency of springback reduction through local pre-cutting and stiffness reinforcement bead relocation.In the local pre-cutting model, springback was slightly reduced by 5.3% compared with the existing model, an insignificant reduction effect. In the stiffness reinforcement bead relocation model, when an X-shaped stiffness reinforcement bead was added to each corner portion of the product, springback was reduced by at least 80%.The X-shaped bead addition model was selected as the springback reduction model, and the level of stiffness compared to the existing model was confirmed through a structural analysis.The X-shaped bead additional model showed a stress springback of 90% and springback reduction of 7.4% compared with the existing model, indicating that springback and stiffness will be reinforced.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.540-549
• /
• 2018

Classifying the front body of the missile and debris of a high-speed missile in intercepting a high-speed missile is an important issue. The motion of the front body of the missile is characterized by precession, but the motion of the debris in the boosting part separation phase is characterized by tumbling. There are periodic patterns caused by the precession or tumbling motion on the dynamic radar cross section (RCS). In addition, there are statistical properties caused by the change pattern of the dynamic RCS. A method is proposed to classify the front body of the missile and debris using periodic and statistical properties of the dynamic RCS. Three kinds of feature vector are extracted from the periodic and statistical properties of the dynamic RCS. The front body of the missiles and debris was classified using a support vector machine.

• Journal of Construction Engineering and Project Management
• /
• v.3 no.2
• /
• pp.1-12
• /
• 2013

Research indicates that good front-end planning (FEP) results in the achievement of higher levels of project performance. By facilitating collaboration among stakeholders in diverse locations with the use of workflow-enabled processes, such pressures can be reduced, and the overall process and results of FEP can be improved. With these goals, a front-end planning tool (FEPT) has been developed as support for owners and major contractors who are engaged in front-end planning. This paper presents the new FEPT and describes how it has been used for construction megaprojects in the nuclear power, oil and gas, and mining industries. The paper begins with the definitions related to and an explanation of the general process for implementing and applying the FEPT and then describes and analyzes how the FEPT was applied in case study projects in order to test its validity. The results indicate that the FEPT increases the efficiency and effectiveness of front-end planning for the megaprojects studied and that it has the potential to produce similar results for other megaprojects.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.273-278
• /
• 2011

This paper has proposed a dual-band transmitter RF Front-end for IMT-Advanced systems which has been implemented in a 0.13-${\mu}m$ CMOS technology. The proposed dual-band transmitter RF Front-End covers 2300~2700 MHz, 3300~3800 MHz frequency ranges which support 802.11, Mobile WiMAX, and IMT-Advanced system. The proposed dual-band transmitter RF Front-End consumes 45 mA from a 1.2 V supply voltage. The performances of the transmitter RF Front-End are verified through post-layout simulations. The simulation results show a +0 dBm output power at 2 GHz band, and +1.3 dBm output power at 3 GHz band.