• 한국음향학회지
• /
• 제38권5호
• /
• pp.522-533
• /
• 2019

거리-도플러 추정을 위한 압축센싱(Compressive Sensing,CS) 모델은 과소결정계인 y = Ax 선형시스템으로 표현할 수 있다. 압축센싱 기법으로 위 선형시스템의 해를 찾으려면 행렬 A가 충분히 비간섭적이고 x가 희소해야 한다. 본 연구는 행렬 A가 비간섭적이도록 행렬 A의 상호간섭성을 낮추는 동시에 소나시스템에서 요구하는 대역폭을 유지하는 송신파형 설계 방법을 제안하였다. 제안한 방법은 행렬사영으로 센싱행렬을 최적화하는 방법과 DFT(Discrete Fourier Transform) 행렬을 이용하여 원하지 않은 주파수밴드를 억압하는 두 가지 방법을 결합한 것이다. 정합필터와 압축센싱 기법을 이용하여 기존파형 LFM(Linear Frequency Modulated)과 설계한 파형의 거리-도플러 추정 성능을 비교하였다. 시뮬레이션을 통해 설계한 송신파형이 기존파형(LFM)보다 탐지성능이 우수함을 보인다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 춘계학술대회
• /
• pp.134-135
• /
• 1993

The purpose of this research is development of EGG system for quantitative assessment of laryngeal function using speech and electroglotto-graphic data. The designed EGG system is 4-electrodes system which excitation current source is supplied from 1st to 4th electrode. The output signal.: from 2nd and 3rd electrodes, which are motivated by frequency of excitation current source, are air-pressure waveforms from vocal folds. After demodulation process, we obtain pitch signals of the modulated waveforms by excitation current source through differentiator which cuts off frequency below 0.1Hz. Software processing methods were used as conventional pitch extraction methods, but the proposed system is designed to analog hardware in order to eliminate interferences from low formant frequency of speech. We will construct the discriminating database between pathological subjects and control groups on each case. Using the proposed 3 channel EGG system and LMS algorithm, it will be detected that the distinctive characteristics of laryngeal function of voiced region and other regions by EGG signals and LPC spectra.

• Journal of Astronomy and Space Sciences
• /
• 제23권3호
• /
• pp.199-208
• /
• 2006

The terrestrial impact cratering record recently has been examined in the time domain by Chang & Moon (2005). It was found that the ${\sim}26$ Myr periodicity in the impact cratering rate exists over the last ${\sim}250$ Myrs. Such a periodicity can be found regardless of the lower limit of the diameter up to D ${\sim}35km$. It immediately called pros and cons. The aim of this paper is two-fold: (1) to test if reported periodicities can be obtained with an independent method, (2) to see, as attempted earlier, if the phase is modulated. To achieve these goals we employ the time/frequency analysis and for the first time apply this method to the terrestrial impact cratering records. We have confirmed that without exceptions noticeable peaks appear around ${\sim}25$ Myr, corresponding to a frequency of ${\sim}0.04(Myr)^{-1}$. We also find periodicities in the data base including small impact craters, which are longer. Though the time/frequency analysis allows us to observe directly phase variations, we cannot find any indications of such changes. Instead, modes display slow variations of power in time. The time/frequency analysis shows a nonstationary behavior of the modes. The power can grow from just above the noise level and then decrease back to its initial level in a time of order of 10 Myrs.

• Journal of Audiology & Otology
• /
• 제23권1호
• /
• pp.27-32
• /
• 2019

Background and Objectives: Detection of auditory signals may be improved when maskers far from the frequency of the target signal are coherently amplitude-modulated. This improvement of signal detection is called comodulation masking release (CMR). In the CMR experiments, flankers have been usually arranged symmetrically. In practice, we will be confronted with a problem by using symmetric flankers due to the limited output of clinical audiometers, especially at high-frequency. We aimed to check whether flanker arrangement has any effect on the amount of CMR, especially when there is no flankers with a frequency higher than the signal. Subjects and Methods: Eighteen normal hearing listeners ranging in age from 20 to 46 years old participated. Symmetric (2-2) and asymmetric (3-1 and 4-0) flankers were used and then the amount of CMR compared among them. Results: Our results showed in the same numbers of flankers, there were no statistically CMR differences between symmetric and asymmetric arrangement. Also when we did not have a flanker at a frequency higher than the signal and all flankers were placed below the signal, there was no statistically difference with the symmetric arrangement. Conclusions: The asymmetry of the flankers and also omitting the flankers with a frequency higher than the signal, have no effect on CMR results. We concluded that CMR can be considered by using clinical audiometer.

• 대한청각학회지
• /
• 제23권1호
• /
• pp.27-32
• /
• 2019

Background and Objectives: Detection of auditory signals may be improved when maskers far from the frequency of the target signal are coherently amplitude-modulated. This improvement of signal detection is called comodulation masking release (CMR). In the CMR experiments, flankers have been usually arranged symmetrically. In practice, we will be confronted with a problem by using symmetric flankers due to the limited output of clinical audiometers, especially at high-frequency. We aimed to check whether flanker arrangement has any effect on the amount of CMR, especially when there is no flankers with a frequency higher than the signal. Subjects and Methods: Eighteen normal hearing listeners ranging in age from 20 to 46 years old participated. Symmetric (2-2) and asymmetric (3-1 and 4-0) flankers were used and then the amount of CMR compared among them. Results: Our results showed in the same numbers of flankers, there were no statistically CMR differences between symmetric and asymmetric arrangement. Also when we did not have a flanker at a frequency higher than the signal and all flankers were placed below the signal, there was no statistically difference with the symmetric arrangement. Conclusions: The asymmetry of the flankers and also omitting the flankers with a frequency higher than the signal, have no effect on CMR results. We concluded that CMR can be considered by using clinical audiometer.

• 전자공학회논문지B
• /
• 제30B권4호
• /
• pp.44-55
• /
• 1993

In this paper, we proposed a new optical method for the efficient recognition of Korean characters. There are six filters in the proposed method which employed the concepts of amplitude-modulated phase-only filter(AMPOF) and spatial frequency modulation(SFM). Here, amplitude modulation is used to achieve improved correlation discrimination and SFM is to reduce the number of filters. We also used a simplified synthetic discriminant function(SDF) for distortion invariance of input image. In order to recognize the partial rotation invariant Korean characters, the proposed distortion invariant minimum average correlation energy (MACE) filter is synthesized SFM, partial rotation invariant filter (PRIF), AMPOF and MACE for partial rotation invariance in the frequency domain. The advantage of the proposed filters is to supress the sidelobes of cross correlation peak away from the autocorrelation peak and to produce sharp correlation peaks. We performed simulation and optical experiment for some of Korea characters using the proposed method. The results show that the proposed method has more improved discriminant ability and reduced processing time than the conventional methods.

• ETRI Journal
• /
• 제44권3호
• /
• pp.379-388
• /
• 2022

This study proposes a novel low-complexity algorithm for computing inverse fast Fourier transform (IFFT)/fast Fourier transform (FFT) operations in binary phase shift keying-modulated orthogonal frequency division multiplexing (OFDM) communication systems without requiring any twiddle factor multiplications. The peak-to-average power ratio (PAPR) reduction capacity of an efficient PAPR reduction technique, that is, H-SLM method, is evaluated using the proposed IFFT algorithm without any complex multiplications, and the impact of oversampling factor for the accurate calculation of PAPR is analyzed. The power spectral density of an OFDM signal generated using the proposed multiplierless IFFT algorithm is also examined. Moreover, the bit-error-rate performance of the H-SLM technique with the proposed IFFT/FFT algorithm is compared with the classical methods. Simulation results show that the proposed IFFT/FFT algorithm used in the H-SLM method requires no complex multiplications, thereby minimizing power consumption as well as the area of IFFT/FFT processors used in OFDM communication systems.

• 한국광학회지
• /
• 제11권2호
• /
• pp.97-101
• /
• 2000

본 논문에서는 광섬유 자이로스코프에서 자이로 출력으로부터 광원의 과잉잡음 성분을 소거할 수 있는 새로운 방법을 제안하고 실험하였다. 이 방식은 기존의 방식과 달리 광원잡음 검출시에 별도의 지연 광섬유가 필요없다는 장점이 있으며, 신호처리를 통해 자이로 출력에서 광우너 과잉잡음의 적정주파수 성분만을 소거하는 방식으로서, 적정주파수에서 동작하는 광섬유 자이로에 단순하게 적용될 수 있다. 고출력 Erbium 첨가 광섬유 광원을 사용하고 적정주파수로 변조된 광섬유 자리로스코프에 이 방식을 적용한 결과, 자이로 출력 스펙트럼상의 잡음이 12dB 감소하였다. 또한, 회전에 따른 자이로 출력을 측정한 결과, 불규칙잡음 계수가 1/3.5 정도로 감소하였다.

• 한국항행학회논문지
• /
• 제24권2호
• /
• pp.85-91
• /
• 2020

최근 다양한 환경에서 무인기를 효율적으로 운용하기 위한 목적으로 멀티모드 레이다 시스템이 고안되었으며, 이는 PD (pulse Doppler) 방식과 FMCW (frequency modulated continuous wave) 방식을 통합하여 활용할 수 있다는 장점을 가진다. 멀티모드 레이다 시스템의 하드웨어 구조의 경우 FFT (fast Fourier transform) 프로세서와 IFFT (inverse fast Fourier transform) 프로세서가 필수적이지만, FFT 프로세서는 큰 복잡도를 갖는 구조 중 하나로 FFT 프로세서의 복잡도를 감소시키는 방향으로의 구조 설계가 필요하다. 또한, 다양한 거리 해상도를 요구하는 레이다 응용 환경을 고려했을 때, FFT 프로세서는 가변 길이의 연산을 지원할 필요가 있다. 이에 본 논문에서는 멀티모드 레이다 신호처리 프로세서 거리 추정부의 FFT 프로세서와 IFFT 프로세서를 16~1024 포인트의 가변 길이 연산을 지원하는 단일 FFT 프로세서의 하드웨어로 설계하여 제안한다. 제안된 FFT 프로세서는 MATLAB 기반 알고리즘 설계를 수행한 뒤, 그 결과를 토대로 Verilog-HDL (hardware description language)을 활용하여 RTL (register transfer level) 설계가 수행되었으며, 논리 합성 결과 총 총 7,452개의 logic elements, 5,116개의 registers로 구현 가능함을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.332-335
• /
• 1990

There are several methods in controlling resonant converters to regulate the output with low switching losses. In this paper, Pulse-width modulation method or current controlled method is applied to regulate the output with low switching losses. In digital implementation of resonant converter systems, the speed of the applied processor is very critical since the switching frequency is very high. Thus the various possible candidates of microprocessors are evaluated for the implementation of resonant converter systems. Then too design methods and techniques are desioribed when single chip processor is used to simplify hardware requirements.