• ETRI Journal
• /
• 제38권3호
• /
• pp.455-462
• /
• 2016

Frequency hopping (FH) is a common characteristic of a wide variety of communication systems. On the other hand, software-defined radio (SDR) is an increasingly utilized technology for implementing modern communication systems. The main challenge when trying to realize an SDR FH system is the frequency tuning time, that is, the higher the hopping rate, the lower the required frequency tuning time. In this paper, significant universal hardware driver tuning options (within GNU Radio software) are investigated to discover the tuning option that gives the minimum frequency tuning time. This paper proposes an improved SDR frequency tuning algorithm for the generation of a target signal (with a given target frequency). The proposed algorithm aims to improve the frequency tuning time without any frequency deviation, thus allowing the realization of modern communication systems with higher FH rates. Moreover, it presents the design and implementation of an original GNU Radio Companion block that utilizes the proposed algorithm. The target SDR platform is that of the Universal Software Radio Peripheral USRP-N210 paired with the RFX2400 daughter board. Our results show that the proposed algorithm achieves higher hopping rates of up to 5,000 hops/second.

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1259-1265
• /
• 2003

We present a new post-fabrication frequency tuning method for laterally driven electrostatic microresonators using a DC-biased electrostatic comb array of linearly varied finger-length. The electrostatic tuning force and the equivalent stiffness, adjusted by the DC-biased tuning-comb array, have been formulated as functions of geometry and DC tuning voltage. A set of frequency-turnable microresonators has been designed and fabricated by 4-mask surface-micromachining process. The resonant frequency of the microfabricated microresonator has been measured for a varying tuning voltage at the reduced pressure of 1 torr. The maximum 3.3% reduction of the resonant frequency is achieved at the tuning voltage increase of 20V.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.293-297
• /
• 2009

In this thesis, design of a VCO(Voltage controlled Oscillator) with a novel tuning mechanism is presented for the Radar system. This circuit, the 9.5 GHz oscillator is designed and implemented by restructuring microstrip resonator to raise Q value and to require a wide frequency tuning range. This product is fabricated on 2.6 Teflon substrate and device is NE722S01. In this paper, The new microstrip resonator VCO is proposed to achieve the characteristic of a wide frequency tuning range. This microstrip resonator VCO shows the phase noise characteristic of -108.3 dBc/Hz at 1 MHz offset from the fundamental frequency, the output power of 5.7 dBm and the second harmonic suppression of -38 dBc for the VCO are obtained. The manufacture VCO shows a frequency tuning range of 193.8 MHz. The proposed micro trip resonator VCO can be used for X-band Radar System with required tuning range.

• 정보저장시스템학회논문집
• /
• 제10권1호
• /
• pp.23-26
• /
• 2014

In this paper, we present a novel approach for tuning the resonant frequency of torsionally driven vertical comb actuators. The tuning unit composed of thermal actuator, scissor mechanism and V-shape shaft enables continuous and reversible resonant frequency tuning. The proposed method is based on the stiffness alteration of the V-shape shaft. It is experimentally verified that the resonant frequency of the torsional microscanner is shifted up to 1.59 kHz from 1.51 kHz showing the maximum tuning ratio of 5.29%.

• 대한전자공학회논문지SD
• /
• 제47권8호
• /
• pp.64-72
• /
• 2010

본 논문은 UWB주파수 합성기용 광대역 전압 제어 발진기로 시그마-델타 모듈레이션을 이용하여 미세한 성긴 튜닝을 구현하였다. 제안된 성긴 튜닝 방법은 위상 잡음 성능의 저하 없이 작은 유효 주파수 해상도를 제공한다. 3단계의 성긴 튜닝구조로 전압제어 발진기는 광대역과 미세 튜닝 단계를 동시에 구현한다. 본 전압 제어기를 포함한 주파수 합성기는 0.13 ${\mu}m$ CMOS공정으로 구현되었고, 5.8-6.8 GHz의 대역에 3.9 kHz의 유효 주파수 해상도를 갖는다. 측정된 위상 잡음은 1 MHz 오프셋에서 -108 dBc/Hz이고, 5.9 mW 전력 소모로 16.8 %의 튜닝 범위를 갖으며, 튜닝 범위를 갖는 Figure-of-merit(FoM)은 -181.58 dBc/Hz이다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.87-90
• /
• 2005

An experimental investigation of the basic characteristics of a micro-cantilever sensor was performed by inspecting the amplitude and frequency characteristics using a commercial tuning fork. Application of acetone and ethanol with a volume of $1 {\mu}l$ on the tine of a vibrating tuning fork cause immediate response in its amplitude and frequency. It has shown that the tuning fork has ability to recognize a chemical agent with high sensitivity.

• 한국통신학회논문지
• /
• 제38A권12호
• /
• pp.991-997
• /
• 2013

본 논문에서는 아날로그필터를 위한 새로운 구조의 주파수 제어 방식(frequency tuning scheme)과 트랜스컨덕턴스(gm) 가변 범위가 넓은 트랜스컨덕터(OTA: Operational transconductor amplifier) 회로를 제안하였다. 제안된 주파수 제어 방식은 트랜스컨덕터와 커패시터로 구성된 1차 저역통과필터의 시정수와 커패시터에 일정 전압이 충전되는데 걸리는 시간과의 관계식을 이용한 것으로 전압제어필터 방식과 유사하게 간단한 구조를 가지며, 기준신호로 순수 정현파를 필요로 하지 않고, 시스템 클럭 또는 외부 수정 발진 회로를 통해 쉽게 얻을 수 있는 클럭 펄스를 사용할 수 있다는 장점이 있다. 또한, 클럭 주파수가 고정된 조건에서도 복잡한 구조의 커패시터 어레이를 사용하지 않고 다중 대역 지원을 목적으로 차단 주파수를 가변하면서 제어할 수 있다. 그리고 모의 실험을 통해 제안된 자동 주파수 제어회로의 동작을 확인하였다.

• 한국통신학회논문지
• /
• 제25권6B호
• /
• pp.114-114
• /
• 2000

In this paper, a current comparative frequency automatic tuning circuit for the CMOS bandpass filter are designed with the new architecture. And also, when the designed circuit is compared the typical tuning circuit, it has very simple architecture that is composed of the current comparator and charge pump and operated in 2V power supply. The proposed tuning circuit automatically compensate the difference between the operating current of the integrator and the reference current which is specified. Using CMOS 0.25um parameter, a CMOS bandpass active filter with center frequency(f0= 100MHz) is designed, and according to the transister size the variation of the center frequency is simulated. As the HSPIC simulation results, the tuning operating of the proposed current comparative frequency automatic tuning circuit is verified.

• 한국공작기계학회논문집
• /
• 제16권1호
• /
• pp.86-91
• /
• 2007

A sensor using quartz toning fork is presented for measuring liquid density. It consists of a PZT plate as an actuator for piezoelectric excitation and a quartz tuning fork as a sensor for resonant frequency detection. The resonant frequency is determined from the sensing voltage measured in tuning fork when the excitation frequencies of PZT actuator are swept around the resonant frequencies of tuning fork. The resonant frequency determined the liquid density. The density values of three kinds of organic solvents are measured and compared with the standard values. The experimental results are in agreement with the standard values and the maximum standard deviation is less than 9%.

• 한국통신학회논문지
• /
• 제25권6B호
• /
• pp.1114-1119
• /
• 2000

In this paper, a current comparative frequency automatic tuning circuit for the CMOS bandpass filter are designed with the new architecture. And also, when the designed circuit is compared the typical tuning circuit, it has very simple architecture that is composed of the current comparator and charge pump and operated in 2V power supply. The proposed tuning circuit automatically compensate the difference between the operating current of the integrator and the reference current which is specified. Using CMOS 0.25um parameter, a CMOS bandpass active filter with center frequency(fo=100MHz) is designed, and according to the transister size the variation of the center frequency is simulated. As the HSPICE simulation results, the tuning operating of the proposed current comparative frequency automatic tuning circuit is verified.