• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.524-527
• /
• 2004

Hybrid rocket had many advantage with compared to solid and liquid rockets. However, the engines have not yet been used in practical rocket systems, due mainly to the disadvantage of hybrid combustion, such as low fuel regression rate. In this study, lab-scale hybrid motor was designed and manufactured. And the methods of regression rate improvement were considered. Test firings with thrusts up to 300 N were conducted with GOX and transparent PMMA. Thrust was calculated with the pressure of the combustion chamber and the regression rate was measured in with variation of oxidizer flow rate. The regression rates showed a strong dependency on GOX mass flux. The frequency analysis technique of the bulk-mode oscillation of motor was applied to a hybrid rocket motor and was based on the principle that this frequency was inversely proportional to the square root of the chamber volume. Several problems and solutions of operating hybrid rocket were presented.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1659-1661
• /
• 2003

Recently, diagnostic techniques have been investigated to defect a partial discharge in high voltage electrical equipment. We have studied the characteristics of the acoustic partial discharge originating from the electrical defects in cubicle GIS(C-GIS). An acoustic emission(AE) sensor is used on the enclosure to detect partial discharge source because the sensor is sensitive to stress waves in its frequency range that may not be from a partial discharge source. AE signal is analyzed with phase-magnitude-frequency number(${\Phi}$-V-n) and pulse per second(PPS). Experience result has shown that the omitted acoustic signal has phase dependency and phase shift characteristic according to increase with applied voltage. These result will be helpful to the pattern recognition of the acoustic partial discharge in a C-GIS.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.235-238
• /
• 2003

Thermo-plastic has generally bad electrical characteristics at high temperature comparing to thermoset-plastics when the plastic apply to electrical power apparatus as an electrical insulator. To solve the problem, we study engineering plastics such as Polyamide and Polyphthalamide as a base resin. And filler of the engineering plastics is glass fiber. Electrical characteristics studied are permittivity, loss factor and breakdown strength according to temperature and frequency of measuring signal. Electrical characteristics of Polyphthalamide has good temperature and frequency dependency comparing to those of Polyamide.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.97-99
• /
• 1998

This paper presents a numerical study of the behavior of the transformer winding, when stressed by the standard impulse voltage. The mathematical model of the transformer takes several points into the account. Capacitance of not adjacent winding as well as adjacent winding, eddy current loss caused by self and mutual inductance given as the functions of frequency. Not like the previous approach where calculation of capacitance is performed, in average sense. In this paper, capacitance of both adjacent and not adjacent winding is calculated using the numerical approach(B.E.M.), so they can get the more accurate value of capacitance. Because of frequency dependency of inductance, numerical-laplace-transform technique is required. Finally, to validate this approach, a simple test winding is simulated.

• Nuclear Engineering and Technology
• /
• v.36 no.2
• /
• pp.184-195
• /
• 2004

The multi-tasking feature of digital I&C equipment could increase risk concentration because the I&C equipment affects the actuation of the safety functions in several ways. Anticipated Transient without Scram (ATWS) is a typical case of safety function failure in nuclear power plants. In a conventional analysis, mechanical failures are treated as the main contributors of the ATWS. This paper quantitatively presents the probability of the ATWS based on a fault tree analysis of a Korea Standard Nuclear Power Plant is also presented. An analysis of the digital equipment in the digital plant protection system. The results show that the digital system severely affects the ATWS frequency. We also present the results of a sensitivity study, which show the effects of the important factors, and discuss the dependency between human operator failure and digital equipment failure.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.3
• /
• pp.70-74
• /
• 2001

Admittance or impedance spectroscopy is one of the powerful tools to study dielectric relaxation and loss processes in organic and inorganic materials. In this study, the frequency dependent properties of an indium tin oxide/tris(8-hydroxyquinoline) aluminum($Alq_3$)/aluminum structure have been studied. The conductance of the $Alq_3$ film increases with the DC applied voltage up to 4V and decreases above 4V in the low frequency region. This indicates that the resistance of the device decreases with the applied bias due to the carrier injection enhancement, thereafter the injected carriers form the space charge and the additional injection of carriers is prevented. The Cole-Cole plot of the admittance takes a one-semicircle shape, which means that the device can be modeled as a parallel resistor-capacitor network. The resistance and capacitance were estimated as 8.62k${\Omega}$ and 2.7nF, respectively, at 3V in the low frequency region. The dielectric constant ( ${\epsilon}'$ ) of the $Alq_3$ film is independent of the frequency in the low frequency region below 100kHz, while the frequency dependency was observed at above 100kHz. The dielectric loss factor ( ${\epsilon}"$ ) of the $Alq_3$ film shows the dielectric dispersion below 100kHz and dielectric absorption in higher frequency domain. The dispersion is thought to be related to the hopping process of the carriers. The ${\epsilon}"$ is proportional to the reciprocal of the frequency. The dielectric relaxation time was extracted to about 0.318${\mu}s$ from the dielectric absorption spectrum.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1988-1990
• /
• 2004

In this paper, we investigated electrical property of epoxy resin which includes elastomers to improve electrical and mechanical property, as varied to additive elastomer contents. There are four samples with 5[phr], 10[phr], 15[phr] and 20[phr]. We meIt was experimented with changing temperature($-80^{\circ}C{\sim}50^{\circ}C$) and frequency (10Hz, 60Hz, 1kHz, 10kHz) According to the experimental results, when the additive elastomer contents are increasing, the permittivity and tan${\delta}$ has very high value in particular at low frequency and high temperature. It also appears that those increasing rates relate to additive elastomer contents. That is to say, even though epoxy resin are improved in mechanical property according to elastomer contents, the elastic epoxy can has bad dielectric characteristics for electrical power application.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.43-54
• /
• 2005

Care should be taken when performing the P and S wave velocity loggings. Some of them are the effect of casing that is installed to prevent the borehole collapsing when the drilling is done on the loose ground such as soil and/or soft rock, and the discrepancy of the velocities of the same media according to the difference of the source wave frequency spectrum. To overcome these difficulties, the following suggestions are recommended; (1) try a careful drilling technique that can eliminate the necessity of the casing, and (2) apply the logging methods with the proper frequency spectrum that is appropriate to the object of the velocity logging.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.6
• /
• pp.42-50
• /
• 1993

In this paper the affect an inorganic filler and a f i n g up water absorption in epoxy composite material was represented. The results are summarized as follows ; 1. In the case of Sample 1, Sample 2 and a fillng up water absorption, the frequency depenence of E,' shows the straight characteristic underl4O0C. 2. Between lOOHz and 3kHz, the frequency dependency of tan8 is dominated by the loss of a dipole relaxation than the conductive loss for movement of a career. The effect of water absorption, is increased as the frequency is d e creased.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.2
• /
• pp.51-56
• /
• 1993

In this paper the affect an inorganic filler and a filling up water absorption in epoxy composite material was represented. The results are summarized as follows; 1. In the case of Sample 1, Sample 2 and a fillng up water absorption, the frequency depenence of ${\varepsilon}_\tau$ shows the straight characteristic under $140^{\circ}C$. 2. Between lOOHz and 3kHz, the frequency dependency of $tan{\delta}$ is dominated by the loss of a dipole relaxation than the conductive loss for movement of a career. The effect of water absorption, is increased as the frequency is decreased.