• 한국철도학회논문집
• /
• 제11권5호
• /
• pp.477-481
• /
• 2008

본 논문은 저압계통에서 전기화재의 징후인 직렬아크의 검출방법에 대해 기술하였다. 제안한 검출회로는 전원주파수 성분을 80dB 이상 감소시킬 수 있는 저역차단주파수가 3kHz인 고역통과필터와 아크신호만을 검출하기 위한 중심주파수가 4kHz인 대역통과필터로 구성된다. UL1699에 규정된 아크발생장치를 이용하여 비선형부하인 위상제어 백열전구와 고주파발생부하인 인버터 추동 유도전동기에서 직렬아크신호를 모의하여 성능을 평가하였다. 실험 결과로부터 세안한 방식은 비선형부하와 고주파발생하에 대해서도 직렬아크신호를 정확히 구분함으로써 현재 최대 문제인 검출오류를 해결하였음이 확인되었다.

• 한국산학기술학회논문지
• /
• 제14권3호
• /
• pp.1445-1450
• /
• 2013

본 논문에서는 1.7-2.7 GHz 대역에서 동작하는 이동통신 기지국용 광대역 직렬 급전 보우타이 다이폴 쌍(series-fed bow-tie dipole pair; SBDP) 안테나를 제안하였다. 기존의 직렬 급전 다이폴 쌍(series-fed dipole pair; SDP) 안테나에서 사용하는 직선 스트립 다이폴 소자 대신에, 제안된 안테나는 보우타이 모양의 다이폴 소자를 사용하였다. 시뮬레이션 분석 결과, 양 끝으로 벌어진 각도가 증가할수록 안테나의 가장 낮은 동작 주파수가 저주파수 대역으로 이동하였으며, 이를 이용하여 저주파수 대역으로 이동한 만큼 다이폴 소자의 길이를 줄일 수 있다. 양 끝으로 벌어진 각도가 10도인 SBDP 안테나를 FR4 기판(비유전율 4.4, 두께 1.6 mm) 상에 제작하였고, SDP 안테나와 비교하여 폭이 10% 줄어들었다. 제작된 SBDP 안테나를 측정한 결과, 전압 정재파비(voltage standing wave ratio; VSWR)가 2 이하인 임피던스 대역폭은 48.8% (1.69-2.78 GHz), 이득은 5.8-6.3 dBi, 전후방비는 14-17 dB이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.64-66
• /
• 1998

This paper presents a new efficient method for transient analysis in magnetodynamic systems of linear eddy current problems. This mehtod employs the Fourier transform and the high-order frequency sensitivity of harmonic finite element method. By taking into account the time-constant of magnetodynamic system, the Fourier integral of continuous frequency is converted into the Fourier series of discrete frequency. And with the results of Fourier series expansion of converted input wave form, the responses of each sinusoids is superposed to give the total response of the magnetodynamic systems. But, if the frequency band of input wave form is broad, it takes long computational time since all responses for each sinusoids must be calculated. Therefore, the high-order frequency sensitivity method is employed to estimate the response variation to frequency. The proposed algorithm is applied to an induction heating system to validate its numerical efficiency.

• 전기학회논문지
• /
• 제59권8호
• /
• pp.1429-1435
• /
• 2010

In this paper, a double lorentz composite right left handed(DL-CRLH) transmission line is designed using defected ground structure (DGS) and varactor diodes. Previously, the diode has been adopted only selectively for one of parallel or series resonators, and the balanced frequency as well as triple band frequencies were fixed. However in the proposed DL-CRLH transmission line, the balanced frequency, where the resonant frequencies of the series-connected parallel resonator and shunt-connected series resonator are the same, is adjustable. In addition, the triple band frequencies are controlled, too. The measured balanced frequency varies between 3.42~4.8GHz according to the controlled bias voltage. Under the same bias condition for the balanced frequency, the adjusted frequencies are 2.22~2.77GHz, 3.7~5.2GHz, 7.32~8.23GHz, 3.42~4.8GHz, and 4.44~5.92GHz for the conditions that ${\beta}d=+0.5{\pi}$, $-0.5{\pi}$, 2nd $+0.5{\pi}$, ${\omega}_{\infty}$, and ${\omega}_o$, respectively.

• 대한전기학회논문지
• /
• 제35권7호
• /
• pp.272-277
• /
• 1986

The system that follows to the resonance frequency of high frequency MOSFET inverter and varies according to the changes of load characteristics is proposed. Also we suggested a method how to select the resonant load type between series and parallel circuit for a given inverter type. It leads to the conclusion that in the case of high impedance loads, parallel resonant circuits are preferable, on the other hand, for low impedance loads, series resonant circuits are more preferable. For frequency tracking, a PLL circuit is used as main control element to detect the phase difference of current and voltage of load. The realized apparatus composed of control circuit and voltage type full-bridged MOSFET elements as main parts of inverter. A stable frequency follow-up characteristics are obtained for 1.2MHz, 1.5KW high frequency output and power is always supplied to the load with unity power factor.

• 한국음향학회지
• /
• 제18권7호
• /
• pp.39-44
• /
• 1999

직사각형 평판의 고유진동수와 진동모드를 연구하였다. 이중 퓨리에 사인시리즈를 직사각형 평판의 모달 변위함수로 사용하였으며, 다양한 경계조건을 가지는 자유진동 해석에 적용하였다. 유한급수 전개로써 근사해를 나타내는 고전적인 Ritz 방법을 이용해서 직사각형 평판의 고유진동수를 해석한 Leissa의 결과와 본 연구의 결과를 비교하였다. 그리고, 평판의 형상비에 따른 영향도 연구하였다. 자유경계 평판, 외팔평판, 고정평판, 그리고 모서리가 단순지지된 직사각형 평판의 진동형태를 가시화 하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.304-308
• /
• 2001

This paper presents a novel prototype of ZCS-PFM high frequency series resonant inverter using IGBT power module for electromagnetic induction eddy current-heated roller in copy and printing machines. The operating principle and unique features of this voltage source half bridge inverter with two additional soft commutation inductor snubber are presented including the transformer modeling of induction heated rolling drum. This soft switching inverter can achieve stable zero current soft commutation under a discontinuous and continuous resonant load current for a widely specified power regulation processing. The experimental results and computer-aided analysis of this inverter are discussed from a practical point of view.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권3호
• /
• pp.343-352
• /
• 1998

Higher frequency of energy transfer or at least energy conversion has to be used in order to reduce the size of inductors and capacitors required in the power supplies. Conventional PWM switching-mode power supplies have a limitation of operating frequency due to switching losses in the switching transistors and rectifier diodes. Means of reducing switching losses have been developed for high-frequency resonant amplifiers or more exactly dc/ac inverters. Because of smooth current and voltage waveforms resonant convertesrs havelower device switching losses and stresses lower electromagnetic interference(EMI) and lower noise than PWM converters. Therefore in this paper design equations of Classs E resonant low dv/dt rectifier with a series resonant capacitor drived using Fourier series techniques. The theory is compared with simulation results obtained for the rectifier operating at 10[MHz] ac input and 5[V] coutput.

• Journal of the Korean Data and Information Science Society
• /
• 제16권4호
• /
• pp.1147-1157
• /
• 2005

Bonus-Malus system is generally constructed based on claim frequency and Bayesian credibility model is used to represent claim frequency distribution. However, there is a problem with traditionally used credibility model for the purpose of constructing bonus-malus system. In traditional Bonus-Malus system adopted credibility model, individual estimates of premium rates for insureds are determined based solely on the total number of claim frequency without considering when those claims occurred. In this paper, a new model which is a modification of structural time series model applicable to counting time series data are suggested. Based on the suggested model relatively higher premium rates are charged to insured with more claim records.

• 한국기계가공학회지
• /
• 제2권2호
• /
• pp.60-66
• /
• 2003

For the estimation of chatter lobe boundary it is very important to calculate the natural mode of cutting process. There are many time series algorithms for getting the natural mode of structural endmilling dynamics considering the cutting process. In this study, we have compared several time series methods such as AR algorithm, ARX, ARMAX, ARMA, Box Jenkins, Output Error, Recursive ARX, Recursive ARMAX considering the sampling frequency. As a results, the ARX, ARMAX and IV 4 are more desirable algorithms for the calculation of modal parameters such as natural frequency and damping ratio In endmilling operation. Also these algorithms may be adopted for the natural mode estimation of endmilling operation for chatter lobe prediction.