• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.205-208
• /
• 2000

In this paper, a low voltage CMOS analog four-quadrant multiplier using two V-I converters is presented. The proposed V-I converter is composed of the series composite transistor and the low voltage composite transistor. The designed analog four-quadrant multiplier has simulated by HSPICE using 0.25$\mu\textrm{m}$ n-well CMOS process parameters with a 2V supply voltage. Simulation results show that the power dissipation is 1.55㎿, the cutoff frequency is 489MHz, and the THD can be 0.26％ at maximum differential input of 1V$\sub$p-p/.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2009

This paper proposes a 24-bit floating point multiply and accumulate(MAC) unit that can be used in geometry transformation process in 3D graphics. The MAC unit is composed of floating point multiplier and floating point accumulator. When separate multiplier and accumulator are used, matrix calculation, used in the transformation process, can't use continuous accumulation values. In the proposed MAC unit the accumulator can get continuous input from the multiplier and the calculation time is reduced. The MAC unit uses about 4,300 gates and can be operated at 150 MHz frequency.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.3 s.345
• /
• pp.40-47
• /
• 2006

The finite-field multiplication can be applied to the elliptic curve cryptosystems. However, an efficient algorithm and the hardware design are required since the finite-field multiplication takes much time to compute. In this paper, we propose a radix-4 systolic multiplier on $GF(2^m)$ with comparative area and performance. The algorithm of the proposed standard-basis multiplier is mathematically developed to map on low-cost systolic cells, so that the proposed systolic architecture is suitable for VLSI design. Compared to the bit-parallel, bit-serial and systolic multipliers, the proposed multiplier has relatively effective high performance and low cost. We design and synthesis $GF(2^{193})$ finite-field multiplier using Hynix $0.35{\mu}m$ standard cell library and the maximum clock frequency is 400MHz.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.961-968
• /
• 2020

This paper describes a design of high performance modular multiplier that is essentially used for elliptic curve cryptography. Our modular multiplier supports modular multiplications for five field sizes over GF(p), including 192, 224, 256, 384 and 521 bits as defined in NIST FIPS 186-2, and it calculates modular multiplication in two steps with integer multiplication and reduction. The Karatsuba-Ofman multiplication algorithm was used for fast integer multiplication, and the Lazy reduction algorithm was adopted for reduction operation. In addition, the Nikhilam division algorithm was used for the division operation included in the Lazy reduction. The division operation is performed only once for a given modulo value, and it was designed to skip division operation when continuous modular multiplications with the same modulo value are calculated. It was estimated that our modular multiplier can perform 6.4 million modular multiplications per second when operating at a clock frequency of 32 MHz. It occupied 456,400 gate equivalents (GEs), and the estimated clock frequency was 67 MHz when synthesized with a 180-nm CMOS cell library.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7A
• /
• pp.568-573
• /
• 2009

This paper presents a step-down DC-DC converter with On-chip Compensation for battery-operated portable electronic devices which are designed in O.13um CMOS standard process. In an effort to decrease system volume, this paper proposes the on chip compensation circuit using capacitor multiplier method. Capacitor multiplier method can minimize error amplifier's compensation capacitor size by 10%. It allows the compensation block of DC-DC converter be easily integrated on a chip and occupy less layout area. But capacitor multiplier operation reduces DC-DC converter efficiency. As a result, this converter shows maximum efficiency over 87.2% for the output voltage of 1.2V (input voltage : 3.3V), maximum load current 500mA, and 25mA output ripple current. This voltage mode controled buck converter has 1MHz switching frequency.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.537-538
• /
• 2008

A step-down DC-DC converter with On-chip Compensation for battery-operated portable electronic devices which are designed in 0.18um CMOS standard process. In an effort to improve low load efficiency, this paper proposes the PFM (Pulse Frequency modulation) voltage mode 1MHz switching frequency step-down DC-DC converter with on-chip compensation. Capacitor multiplier method can minimize error amplifier compensation block size by 20%. It allows the compensation block of DC-DC converter be easily integrated on a chip and occupy less layout area. But capacitor multiplier operation reduces DC-DC converter efficiency. As a result, this converter shows maximum efficiency over 87% for the output voltage of 1.8V (input voltage : 3.3V), maximum load current 500mA, and 0.14% output ripple voltage. The total core chip area is $mm^2$.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.5
• /
• pp.58-67
• /
• 1994

In this paper, It was designed the 2.8GHz local oscillator which convert 14.5 14.8GHz uplink frequency to 11.7 12.0GHz downlink frequency by the receiving mixer on the communication satellite transponder according to the rating of domestic satellite. Mukunghwa 1. To prevent the variation of the communication channel bandwidth, it needs a high stability and low phase noise characteristics. So we designed to get the target frequencey by multipling the output signal from the crystal oscillator. We got the simplicity of the circuit by manufacturing the X4 multiplier with transistor which is ordinarily used as a device of a below X3 multiplier for the efficiency.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.914-917
• /
• 1999

The paper describes a 17 $\times$ 17-b multiplier using the Radix-4 Booth’s algorithm. which is suitable for 32-bit RISC/DSP microprocessors. To minimize design area and achieve improved speed, a 2-stage pipeline structure is adopted to achieve high clock frequency. Each part of circuit is modeled and optimized at the transistor level, verification of functionality and timing is performed using HSPICE simulations. After modeling and validating the circuit at transistor level, we lay it out in a 0.35 ${\mu}{\textrm}{m}$ 1-poly 4-metal CMOS technology and perform LVS test to compare the layout with the schematic. The simulation results show that maximum frequency is 330MHz under worst operating conditions at 55$^{\circ}C$ , 3V, The post simulation after layout results shows 187MHz under worst case conditions. It contains 9, 115 transistors and the area of layout is 0.72mm by 0.97mm.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1315-1317
• /
• 2003

In this paper, a hew ground speed signal detector used for railway vehicles is presented. A frequency 6-multiplier is designed to the proposed speed signal detector to achieve more precise ground speed from the slow analog signals made from mechanical tacho signal generator. The computer simulation is carried out to clarify its effectiveness.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.201-202
• /
• 2008

In this paper, an efficient frequency offset compensation design for OFDM(Orthogonal Frequency Division Multiplexing) is proposed. The conventional CORDIC(COordinate Rotation Digital Computer) algorithm for frequency offset compensation utilizes CORDIC hardware and complex multiplier. But, proposed structure utilizes only one CORDIC hardware.