• 소음진동
• /
• 제9권3호
• /
• pp.570-576
• /
• 1999

This paper presents numerical and experimental results of modal parameter identification in a generator stator frame for 500 MW fossil power plants. A commercial finite element analysis S/W was employed for modal analysis. The generator is excited by alternating electromagnetic forces, mainly of 120 Hz in 60 Hz machines, due to magnetic field and electric current in windings. It is necessary to verify that the stator frame has adequate frequency margin from the excitation frequency to avoid possible resonance when operating. Thus, frequency margin required for the stator frame is established using the numerical and experimental results. The results show that the stator frame meets the frequency-margin requirements. Also, results of modal analysis for design modification in order to reduce weights of the stator frame without deteriorating vibration characteristics are presented.

• Journal of electromagnetic engineering and science
• /
• 제7권2호
• /
• pp.83-90
• /
• 2007

In this paper, the formulation of the protection ratio based upon a composite fade margin and availability is newly presented for the detailed planning of frequency coordination in the microwave relay system network, and computed results for co-channel and adjacent channel protection ratios are illustrated over an actual system with 6.2 GHz. It is shown that the protection ratio to assure a quality of service can be expressed in terms of the composite fade margin, noise-to-interference ratio, net filter discrimination, and system parameters. In addition, the net filter discrimination, depending upon the transmitter spectrum mask and the overall receiver filter characteristic, has been examined to investigate the effect of the adjacent channel protection ratio caused by the adjacent channel interference. Regarding simulated results for 6.2 GHz, 60 km, 64-QAM, and N/I=6 dB at the bit error rate of $10^{-6}$, composite fade margin and co-channel protection ratio yield 25.14 and 50.3 dB, respectively. Also, the net filter discrimination of 26.5 dB and the adjacent channel protection ratio of 23.8 dB are obtained at the first adjacent channel of 30 MHz. The proposed method provides some merits in view of a comprehensive and practical application with more detailed and various system parameters needed to access the criteria for making the proper frequency coordination.

• 정보처리학회논문지C
• /
• 제13C권6호
• /
• pp.677-684
• /
• 2006

본 논문은 구현에 사용된 동기알고리즘에 의한 구현손실과 다중경로 페이딩을 고려하여 MB-OFDM UWB(Multi-Band Orthogonal Frequency Division Multiplexing Ultra Wide Band) 시스템 수신기 링크 마진 (link margin)을 시뮬레이션을 통해 정량적으로 분석하였다. MB-OFDM UWB시스템은 CP(Cyclic Prefix)대신에 ZP(Zero padding)를 사용하고 심볼마다 3개 주파수 대역을 호핑(Hopping)하는 TFI(Time Frequency Interleaving)모드와 하나의 주파수 대역을 선택하여 신호를 전송하는 FFI(Fixed Frequency Interleaving)모드를 지원한다. 이러한 MB-OFDM UWB 시스템의 특징은 기존 연속적인 신호를 전송하는 OFDM 시스템들에 비해 평균전력은 동일하지만 유효송신출력 측면에서 더 높은 전력 방사를 가능하게 하는 장점이 있다. 본 논문에서 수행한 시뮬레이션 결과를 이용한 링크마진 계산 결과 200Mbps 모드에서 4m 서비스 반경을 보장하기 위해서는 TFI 모드 구현이 필수적이며, 480Mbps모드의 실질적인 서비스 반경은 가시거리가 확보되는 다중경로 환경에서 1-2m정도 일 것으로 분석되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.125-129
• /
• 1987

The stability margin of the LQ regulator is investigated in the time domain. it is shown that the same guaranteed gain margin as that of the frequency domain analysis can be obtained with simple assumptions for the continuous time systems. It is also shown that the allowable modelling error bound can be expressed in terms of system matrices and Riccati equation solution. Guaranteed qain. margin and the allowable modelling error bound for the discrete time systems are also obtained by the similar procedures. In this case, through the some examples, the gain margin is shown to be less conservative than the frequency domain analysis result.

• 소음진동
• /
• 제8권2호
• /
• pp.331-335
• /
• 1998

회전 상태에 있는 증기 터빈 버킷의 진동 시험 및 해석 결과를 본 논문에 기술하였다. 중고압용 터빈 로터에서 9단 휠 도브테일의 치수 변경으로 인해 9단 버킷의 치수 수정이 불가피하였고, 진동 시험과 해석은 수정된 9단 버킷의 고유 진동수가 노즐 통과 주파수로부터 공진을 피할 수 있는 주파수 분리 여유를 갖는지를 검정하기 위하여 이루어졌다. 해석은 상용 유한 요소 해석 프로그램을 이용하였고 실험 전 설계 변경의 성공 가능성 파악 및 후속 시험에 도움을 주기 위해 행하였다 진동 시험은 기존 밸런싱 설비를 이용해 진공 상태에서 회전하고 있는 버킷에 공기 분사 가진및 무선진동신호 측정 시스템을 이용해 행하였다. 시험 결과를 경험식의 결과와 비교하였고, 수정된 버킷이 제시된 주파수 분리 여유를 만족함을 보였다.

• 방송공학회논문지
• /
• 제15권1호
• /
• pp.89-98
• /
• 2010

본 논문에서는 FM 방송 링크용 M/W 시스템의 주파수 재배치 시 동등 수준의 전송 품질이 유지되기 위한 기술적 분석 방법론을 제안한다. 실제 각 주파수 대역에서 동작하는 M/W 중계 장치에 대한 수치 계산을 하였으며, 그 결과를 페이드 마진으로 표현된 링크 가용율로 평가하였다. 1700 MHz 대역에서 2.6 dB 이상의 상대적 페이드 마진이 확보가 되면 주파수 재배치 후에도 동일한 품질을 얻을 수 있음을 보였다. 제안된 방법은 M/W 장치의 주파수 재배치에 관한 서비스 품질 평가에 크게 활용될 것으로 여겨진다.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1505-1514
• /
• 2019

The permanent magnet synchronous motor (PMSM) is widely used in various fields and the proportional-integral (PI) controller is popular in PMSM control systems. However, the motor parameters are usually unknown, which can lead to a complicated PI controller design and poor performance. In order to design a PI controller with good performance when the motor parameters are unknown, a control algorithm based on stability margin is proposed in this paper. First of all, based on the mathematical model of the PMSM and the least squares (LS) method, motor parameters are estimated offline. Then based on the estimation values of the motor parameters, natural angular frequency and phase margin, a PI controller is designed. Performance indices including the natural angular frequency and the phase margin are used directly to design the PI controller in this paper. Scalar functions of the d-loop and the q-loop are selected. It can be seen that the designed controller parameters satisfy Lyapunov large scale asymptotic stability theory if the natural angular frequencies of the d-loop and the q-loop are large than 0. Experimental results show that the parameter estimation method has good accuracy and the designed PI controller proposed in this paper has good static and dynamic performances.

• 대한치과기공학회지
• /
• 제32권1호
• /
• pp.17-21
• /
• 2010

This experimental study was to determine the fitness in each cervical margin of reusing porcelain gold alloy. The gold alloy used in this experimental study was a Au-Pt-Pd alloy (BDCG-898, Bukwang Inc, Korea) for the fabrication of porcelain fused to metal crown. Twenty-five copings were divided into the five groups. And the group A, B, C, D and E were cording successively according to the frequency of reuse to five times. Each specimen was reused without adding new metal. The experimental results were as follows: 1. The group A, B, C showed good fitness in each cervical margin. 2. The group D got good fitness in labio and linguo cervical margin, but the mesio and disto cervical margin showed more than $40{\mu}m$ 3. The group E showed worse fitness than the other groups in each cervical margin.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권5호
• /
• pp.463-469
• /
• 2018

Morphological information such as shape and margin of micro lesion is important information for diagnosis of disease in clinical imaging. In this study, we investigated the morphological changes of the micro lesions by comparing the contrast and area in grid suppressed DR images according to grid frequency. In the profile analysis of the image, the mass showed an average intensity variation of 8.6 ~ 72.4 after suppression, The higher the grid frequency, the more the contrast was increased. However, in the images obtained using 103 lp / inch, which is a grid frequency less than the sampling frequency, the contrast of the mass in the vertical direction decreased after suppression. In the binary image, the area change of the mass was also large. As a result, the shape, size, and margin of the mass changed. In the case of very small calcification, the higher the grid frequency is the larger the change in contrast, so that a clear image can be obtained in the post-suppression image. However, we could confirm that the margin of the lesion was blurred and the lesion was lost in some of the images using the 103 lp / inch grid. The higher the frequency of the grid, The change of the contrast of fiber occurred largely and clear boundary was confirmed. The decrease of the number of pixels was small and morphological change was small. In conclusion, when using a grid frequency that is not suitable for the sample frequency, morphological changes or lesion loss of micro lesions in the post- suppression image may give the possibility of misdiagnosis in diagnosis and differentiation of the image.

• 대한치과기공학회지
• /
• 제31권1호
• /
• pp.17-21
• /
• 2009

This experimental study was to determine the fitness on each cervical margin of recast using crown base metal alloy. The alloy used in this experimental study was a Ni-Cr alloy(Wirolloy, Bego, Germany) for the fabrication of full cast crown prosthesis. Twenty-five copings were divided into the five groups. And the group A, B, C, D and E were cording successively according to the frequency of recast to five times. Each specimen was recasted without adding new metal. The experimental results were as follows: 1. The group A and B showed good fitness had subtle differences in each cervical margin adaptation, in other words, the mesio and disto cervical margin showed worse adaptation than the bucco and linguo cervical margin. 2. The group C got good fitness in bucco and linguo cervical margins, but the mesio and disto cervical margin showed inaccurate fitness. And I could not get good casting bodies without adding new metal. 3. The group D and E showed bad fitness for each cervical margin. Therefore the group D and E lost its function as a dental restoration.