DOI QR코드

DOI QR Code

An analysis of link margin for MB-OFDM UWB system in multi-path channel

다중 경로 채널에서의 MB-OFDM UWB 시스템 링크 마진 분석

  • 신철호 (한국전자통신연구원) ;
  • 최상성 (한국전자통신연구원 무선 홈네트워크연구팀) ;
  • 백정기 (충남대학교 전파공학과)
  • Published : 2006.10.30

Abstract

This paper investigates the link margin of MB-OFDM UWB system quantitatively. Various simulations are performed considering the implementation loss by imperfect synchronization unit and the effect of multi-path fading channels. MB-OFDM UWB system uses ZP(Zero Padding) instead of CP(Cyclic Prefix) and supports two transmission modes; one is TFI(Time Frequency Interleaving) mode that transmits OFDM symbols using different carrier frequency from symbol to symbol according to Time Frequency(TF) codes, the other is FFI(Fixed Frequency Interleaving) mode that transmits OFDM symbols using a specific carrier frequency. The advantage of if and TFI is to be able to increase the transmitting power effectively compared to the existed OFDM systems that transmit the signal continuously at the same average transmitting power. From the analysis results of Ink margin, to guarantee the service range of 4m in 200Mbps mode, TFI mode must necessarily be implemented and the service range of 480Mbps mode is estimated about 1-2m in the line-of-sight multi-path channel (CMI).

본 논문은 구현에 사용된 동기알고리즘에 의한 구현손실과 다중경로 페이딩을 고려하여 MB-OFDM UWB(Multi-Band Orthogonal Frequency Division Multiplexing Ultra Wide Band) 시스템 수신기 링크 마진 (link margin)을 시뮬레이션을 통해 정량적으로 분석하였다. MB-OFDM UWB시스템은 CP(Cyclic Prefix)대신에 ZP(Zero padding)를 사용하고 심볼마다 3개 주파수 대역을 호핑(Hopping)하는 TFI(Time Frequency Interleaving)모드와 하나의 주파수 대역을 선택하여 신호를 전송하는 FFI(Fixed Frequency Interleaving)모드를 지원한다. 이러한 MB-OFDM UWB 시스템의 특징은 기존 연속적인 신호를 전송하는 OFDM 시스템들에 비해 평균전력은 동일하지만 유효송신출력 측면에서 더 높은 전력 방사를 가능하게 하는 장점이 있다. 본 논문에서 수행한 시뮬레이션 결과를 이용한 링크마진 계산 결과 200Mbps 모드에서 4m 서비스 반경을 보장하기 위해서는 TFI 모드 구현이 필수적이며, 480Mbps모드의 실질적인 서비스 반경은 가시거리가 확보되는 다중경로 환경에서 1-2m정도 일 것으로 분석되었다.

Keywords

References

  1. A. Batra et al., 'Multi-band OFDM Physical Layer Proposal for IEEE 802.15 Task Group 3a', IEEE P802.15-03/268r3, March 2004
  2. 신철호, 이한호, 최상성, 백정기, '4 병렬 동기 구조를 이용한 MB-OFDM UWB 수신기 설계 및 평가', 한국전자파학회논문지, Vol.16, No.11, pp.1075-1085, Nov., 2005
  3. P. H. Moose, 'A Technique for Orthogonal Frequency Division Multiplexing Frequency Offset Correction', IEEE Transactions on Communications., Vol.42, pp.2908-2914, Oct., 1994 https://doi.org/10.1109/26.328961
  4. A. Miaoudakis, A. Koukourgiannis, G. Kalivas, 'Carrier Frequency Offset Estimation and Correction for HiperLan/2 WLANs', Seventh International Symposium on Computers and Communications(ISCC'02), pp.693-698, July, 2002 https://doi.org/10.1109/ISCC.2002.1021749
  5. J-J. Van de Beek, O. Edfors, M. Sandell, S. K. Wilson, P. O. Borjesson, 'On Channel Estimation in OFDM Systems,' IEEE 45th Vehicular Technology Conference(VTC), Vol.2, pp.257-261, 22-28 July, 1995
  6. M. Speth, S. A. Fechtel, G. Fock, H. Meyr, 'Optimum Receiver Design for Wireless Broad-Band Systems Using OFDM-Part I', IEEE Transactions on Communications, Vol.47, pp.1668-1677, Nov., 1999 https://doi.org/10.1109/26.803501
  7. M. Zhao, P. Qiu, J. Tang, 'Sampling Rate Conversion and Symbol Timing for OFDM Software Receiver', IEEE 2002 International Conference on Communications, Circuits and Systems and West Sino Expositions, Vol.1, pp.114-118, July, 2002 https://doi.org/10.1109/ICCCAS.2002.1180584
  8. Jeff Foerster, 'Channel Modeling Sub-committee Report Final,' IEEE P802.15-02/368r5-SG3a, Nov., 2002
  9. A. Batra, J. Balakrishnan, G. R. Aiello, J. R. Foerster, A. Dabak, 'Design of Multiband OFDM System for Realistic UWB Channel Environment,' IEEE Trans. On Microwave Theory and Techniques, Vol. 52, No. 9, pp. 2123-2138, Sept., 2004 https://doi.org/10.1109/TMTT.2004.834184