• 제목/요약/키워드: Frequency Characteristic

검색결과 2,976건 처리시간 0.03초

연면방전 플라즈마를 이용한 톨루엔 처리에 관한 연구 (Toluene Removal Using Surface Discharge Induced Plasma Chemical Process)

  • 부문자;봉춘근;김신도
    • 한국대기환경학회지
    • /
    • 제13권4호
    • /
    • pp.297-305
    • /
    • 1997
  • The experimental study by use of SPCP was fulfilled to remove toluene emitted from various industrial processes. First of all, discharge characteristic was experimented as the change of applied voltage and frequency. Then toluene removal characteristic was tested with the analysis of by-products. As a result, optimum electrical discharge condition was from 20.0 kHz to 25.0 kHz of frequency and from 3.5 kV to 4.0 kV of voltage range. The variation of applied voltage had a more important effect on the removal characteristic of toluene than the frequency variation. The toluene removal efficiency was proportioned to ozone concentration and retention time on discharge plate. It was dropped as increase of toluene concentration, but total treated volume of tolene per power consumption was high. The decomposed toluene was transformed to $CO, CO_2$ and particulates, and the rate of transformation to particulates was higher than CO and $CO_2$ at high toluene concentration. Particulates were increased from 0.017 $\mum$ to 0.3 $\mum$ range of size distribution.

  • PDF

Honeycomb 스포크로 된 비공기압 타이어의 고유진동수 해석 (Natural Frequency Analysis of a NPT with Honeycomb Spokes)

  • 조홍준;이치훈;김기홍;김감찬;김두만
    • 항공우주시스템공학회지
    • /
    • 제5권2호
    • /
    • pp.33-39
    • /
    • 2011
  • The vibration characteristic of tires is one of very important issues which heavily affect the noise and comfort on driving. Therefore, when the new tire is designed, the vibration characteristic of tire should be considered. In this paper, the vibration characteristic of non-pneumatic tire is investigated for geometric of NPT which is designed by cell angle of spoke. The analysis is based on the finite element method and used ABAQUS program, which is able to non-linear analysis. The material of NPT is used for the Ogden energy model, which is model of hyperelastic material. This paper investigate natural frequency and modal of NPT and compare result of NPT with it of pneumatic tire.

백래시 크기 변화 감지를 위한 주파수응답특성의 활용 (The Utilization of Frequency Response Characteristic for the Detection of Change of Backlash Magnitude)

  • 백주현
    • 한국시뮬레이션학회논문지
    • /
    • 제24권3호
    • /
    • pp.45-54
    • /
    • 2015
  • 본 논문에서는 기어감속 서보시스템의 모터입력전압 크기를 적절히 감소시키면 모터입력전압에 대한 모터각속도에서 나타나는 주파수응답특성에 미치는 백래시 영향이 매우 커지게 됨을 보여 주였다. 또한 주파수응답선도에서 나타나는 반공진 및 공진주파수 변화량을 관찰하여 기어감속 서보시스템 내 기어 백래시 변화를 감지할 수 있는 방법의 유용성을 이론적, 시뮬레이션 및 실험적으로 검증하였다. 반공진주파수 변화가 공진주파수 변화 보다 안정적으로 계측될 수 있으므로 백래시 크기 변화감지 시 반공진주파수 변화량 관찰이 좀 더 유용하며, 공진주파수는 모터입력전압을 충분히 감속시켜야 급격한 변화를 관찰할 수 있음을 보여주었다. 본 연구는 기어감속 서보시스템 내 백래시 크기 변화 감지에 대한 향후 연구에 있어서 유용하게 사용될 수 있을 것이라고 생각한다.

고주파 유도가열용 전원장치의 개발에 관한 연구 (A Study on Development of Power Supply for High Frequency Induction Heating)

  • 이봉섭
    • 한국산업융합학회 논문집
    • /
    • 제5권3호
    • /
    • pp.179-186
    • /
    • 2002
  • This paper proposed LC resonant current fed high frequency inverter for high frequency induction heating using leakage inductance of transformer and, its described operating principle. The analysis of circuit presented by using normalized parameter in considering leakage inductance of transformer and, discussed characteristic evaluation of inverter circuit in detail. The proposed inverter is operating ZVS to reduce turn-on and turn-off loss of switching devices so, raised an efficiency. And, the experimental apparatus was made on base characteristic evaluation of theoretical analysis to discuss possibility on high frequency source and confirmed a rightfulness theoretical analysis. A result of study, the proposed inverter is higher utilizing factor using on leakage inductance of transformer and show possibility, which is application on high frequency power system.

  • PDF

A calculation method of root loci band and its applications to robust control system design

  • Okuyama, Yoshifumi;Chen, Hong;Takemori, Fumiaki
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
    • /
    • pp.350-353
    • /
    • 1994
  • This paper presents a method to calculate the characteristic root areas and loci band of control systems with uncertainties. First, equations of boundary curves of root areas in the case of additive and multiplicative perturbation are derived. Then, an algorithm for the calculation of the array of closed curves is presented. When the upper bound of the absolute values of frequency responses for the uncertain part, is also frequency-dependent, the frequency-dependent, terms are included in the characteristic equation of the nominal system. This lead to the boundary equations of the root, areas for control systems with frequency-dependent uncertainty. Numerical examples of the control systems with multiplicative perturbations including frequency-dependent terms are presented to verify this calculation method. Finally, its applications to the design of robust control systems, e.g., passive adaptive control systems are also discussed.

  • PDF

발전기 부하추종성 시험용 주파수 Simulator 설계에 관한 연구 (A Study on Frequency Simulator Design for Load Following Test of Generator)

  • 곽월환;이강완;오창수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.138-142
    • /
    • 2004
  • Recently over dropped frequencies of power system were recorded when power system was unbalanced between generation and demand. Therefore load following characteristic analysis of thermal and combined cycle power plant generators is necessary for low frequency condition analysis of power system. Frequency simulator supplies simulated frequency to the online generator for prescribed goal. This simulator needs to minimize effects to power system and requires stability first. This paper introduces design and manufacturing case of frequency simulator for load following characteristic analysis of generators.

  • PDF

저온 동시소성 세라믹을 이용한 적층형 VCO의 설계 및 제작 (Design and Manufacture of Multi-layer VCO by LTCC)

  • 박귀남;이헌용;김지균;송진형;이동희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
    • /
    • pp.291-294
    • /
    • 2003
  • The circuit substrate was made from the Low Temperature Cofired Ceramics(LTCC) that a $\varepsilon_\gamma$ was 7.8. Accumulated Varactor and the low noise transistor which were a Surface Mount Device-type element on LTCC substrate. Let passive element composed R, L, C with strip-line of three dimension in the multilayer substrate circuit inside, and one structure accumulate band-pass filter, resonator, a bias line, a matching circuit, and made it. Used Screen-Print process, and made Strip-line resonator. A design produced and multilayer-type VCO(Voltage Controlled Oscillator), and recognized a characteristic with the Spectrum Analyzer which was measurement equipment. Measured multilayer structure VCO is oscillation frequency 1292[MHz], oscillation output -28.38[dBm], hamonics characteristic -45[dBc] in control voltage 1.5[V], A phase noise is -68.22[dBc/Hz] in 100 KHz offset frequency. The oscillation frequency variable characteristic showed 30[MHz/V] characteristic, and consumption electric current is approximately 10[mA].

  • PDF

하프브리지 DC-DC 컨버터의 순시추종제어 (Instantaneous Following Control of Half-Bridge DC-DC Converter)

  • 라병훈;이현우;김상돈;김광태
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
    • /
    • pp.54-57
    • /
    • 2003
  • A new non linear, mean value, instantaneous following control technique to design half bridge converter is proposed in witch control principle uses characteristic that reset time of analog integrator is inverse proportion In input voltage. It is Important characteristic that compensation and follow-up control time are same with switching frequency. Is completed in one cycle that base control frequency. Have excellence characteristic that follow in order instruction value exactly stationary state as well as transient state. Half bridge converter that apply this control principle can know that have stabilize and excellence characteristic. This technique is verified through an experiment, and know that experiment result and theory agree well.

  • PDF

광대역 전력용 전치증폭기 설계 (Design of Pre-amplifier for Ultrabroadband Power)

  • 김갑기
    • 한국정보통신학회논문지
    • /
    • 제9권7호
    • /
    • pp.1529-1533
    • /
    • 2005
  • 본 논문에서는 광대역전력증폭기에 사용가능한 전치증폭기를 설계하였다. 전치증폭기는 주파수특성과 잡음특성이 우수한 WJ사의 AMl의 사용하였다. 부궤환을 이용하여 100MHz${\~}$3GHz 대역에 걸쳐서 우수한 VSWR 특성과 주파수 특성을 갖도록 설계하였다. 설계된 전치증폭기는 EMC 측정장비와 같은 광대역 i성을 필요로 하는 장비의 전력 증폭기에 활용 가능할 것으로 사료된다.

음소 특정 파라미터를 이용한 무성자음 인식 (The Recognition of Unvoiced Consonants Using Characteristic Parameters of the Phonemes)

  • 허만택;이종혁;남기곤;윤태훈;김재창;이양성
    • 전자공학회논문지B
    • /
    • 제31B권4호
    • /
    • pp.175-182
    • /
    • 1994
  • In this study, we present unvoiced consonant recognition system using characteristic parameters of the phoneme of the each syllable. For the recognition, the characteristic parameters on the time domain such as ZCR, total energy of the consonant region and half region energy of the consonant region, and those on the frequency domain such as the frequency spectrum of the transition region are used. The objective unvoiced consonants in this study are /ㄱ/,/ㄷ/,/ㅂ/,/ㅈ/,/ㅋ/,/ㅌ/,/ㅍ/ and /ㅊ/. Each characteristic parameter of two regions extracted from these segmented unvoiced consonants are used for each recognition system of the region, independently, And complementing two outputs of each other system, the final output is to be produced. The recognition system is implemented using MLP which has learning ability. The recognition simulation results for 112 unvoiced consonant samples are that average recognition rates are 96.4$\%$ under 80$\%$ learning rates and 93.7$\%$ under 60$\%$ learning rates.

  • PDF