• 한국해양공학회지
• /
• 제26권1호
• /
• pp.9-16
• /
• 2012

This paper presents the numerical results of a simulation of the free surface flow around a blunt bow ship model and focuses on the validation of the proposed method with a brief investigation of the relation between the resistance and free surface behavior. A finite volume method based on the Reynolds Averaged Navier-Stokes (RANS) approach is used to solve the governing flow equations, where the free surface, including wave breaking,is captured by using a two-phase Level-Set (LS) method. For turbulence closure, a two equation k-${\varepsilon}$ model with the standard wall function technique is used. Finally, the numerical results are compared with the available experimental data, showing good agreement.

• 대한조선학회논문집
• /
• 제42권4호
• /
• pp.322-329
• /
• 2005

Viscous flows behind transom stern are analyzed based on CFD simulation results. Stern wave pattern is often complicated due to the abrupt change of stern surface curvature and flow separation at transom. When a ship advances at high speed, whole transom stern is exposed out of water, resulting in the so-called 'dry transom'. However, in the moderate speed regime, stern wave development in conjunction of flow separation makes unstable wavy surface partially covering transom surface, i.e., the so-called 'wetted transom'. Transom wave formation is usually affecting the resistance characteristics of a ship, since the pressure contribution on transom surface as well as the wave-making resistance is changed. Flow modeling for 'wetted transom' is difficult, while the 'dry transom modeling' is often applied for the high-speed vessels. In the present study CFD results from the RANS equation solver using a finite volume method with level-set treatment are utilized to assess the topology of transom flow pattern for a destroyer model (DTMB5415) and a container ship (KCS). It is found that transom flow patterns are quite different for the two ships, in conformity to the shape of submerged transom. Furthermore, the existence of free surface seems to after the flow topology in case of KCS.

• 대한조선학회논문집
• /
• 제32권3호
• /
• pp.72-82
• /
• 1995

본 연구에서는 자유수면 아래서 일정한 속도로 전진하는 수중익에 의한 유동현상을 수치적으로 계산하였다. 수치계산은 MAC(Marker and Cell) 방법에 기초한 Navier-Stokes방정식의 수치해석법을 이용하여 직사각형격자계에서 수행하였으며, 날개와 자유수면 부근에는 계산정도를 높이기 위하여 격자를 집중시켰다. 자유수면 파형 및 수중익 주위의 압력분포와 점성유동현상도 계산하였으며, 수중익의 잠긴 깊이에 따른 파형의 변화와, 쇄파(breaking wave)현상에 대하여서도 수치적으로 해석하였다. 또한, 선형시험수조에서 모형시험을 수행하여 깊이변화에 따른 파형을 계측하였다. 검증을 위하여 수치계산결과들을 이 실험 및 다른 실험결과들과 비교하고 계산정도를 확인하였다.

• 수산해양기술연구
• /
• 제17권2호
• /
• pp.109-113
• /
• 1981

Most existing theories on ship waves and wave resistance are based on the perturbation of the flow field by a small pararr.eter which specifies the slenderness of the ship hull. Since however, ship hulls in practice are neither so slender nor thin enough to secure the validity of the linearized theory, the agreen:ent between the theoretical prediction and the experimental result is not generally satisfactory. The author pointed out that the contribution by the non-linear term in the free surface condition can be represented by sorr.e source distribution over the still water plane. This paper leads to a forrr.ula for the wave resistance of not slender ships at low Froude nurr.bers. and deals with the asynptotic expression. As a nurr.erical example, the wave resistance of Wigley model is calculated, and the result is compared with experimental values. It is concluded that the wave resistance coefficient varies in the rate of Fn6 at low speed limit in general. A comparison with the result derived from the linearized free surface condition shows that the non-linearity of the free surface is irr portant at low speed.

• 한국전산유체공학회지
• /
• 제1권1호
• /
• pp.55-63
• /
• 1996

Numerical computations are carried out to analyze the characteristics of flow fields around Air Supported Ships. The computations are performed in a rectangular grid system based on MAC(Marker And Cell) method. The governing equations are represented in finite difference forms by forward differencing in time and centered differencing in space except for its convection terms. For the certification of this numerical analysis method, the computations of flow fields around a Catamaran, an ACV(Air Cushion Vehicle) modeled with pressure distribution on free surface and two SES(Surface Effect Ship)'s are carried out, The results of the present computations are compared with the previously presented computational and experimental results in the same condition.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.98-111
• /
• 1993

2차원 비정상 비선형 자유표면파를 해석하고 자유표면파에서의 점성효과를 관찰하였다. 유동장내의 Navier-Stokes 방정식과 연속방정식을 풀기 위해 유한해석법을 적용하였고, 자유표면의 처리를 위해 MAC 기법을 적용하였다. 그리고, 자유표면에서는 표면장력을 고려한 경계조건을 적용하였으며, 층류에 대한 점성효과만을 고려하였다. 계산모델은 천수역에서의 점성영향, 자유표면 근처에서의 보오텍스 쌍(vortex-pair)의 거동 및 전진하는 부유체 앞에서의 자유표면파문제 등이다. 천수역문제에서는 바닥과의 마찰에 기인한 자유표면파의 변화를 고찰하였으며, 특히 고립파에 대한 적용으로서 파고의 감소정도, 수직벽면에서의 파상승(wave run-up) 및 수심의 변화로 인한 유장변화 등을 살펴보았다. 보오텍스 문제에서는 보오텍스의 이동에 따른 자유표면주위의 유동변화를 관찰하였으며, 사각부유체 주위의 유동문제에서는 전진속도의 차이에 따른 자유표면파의 차이 및 물체주위의 유동특성을 관찰하였다.

• 한국항만학회지
• /
• 제13권1호
• /
• pp.175-182
• /
• 1999

The ocean wave is hydrodynamically investigated to get more reliable solution. To improve the computational accuracy more fine grids are used with relatively less computer storage on the free surface. One element of the free surface is discretized into more fine grids because the free-surface waves are much affected by the grid size in the finite difference scheme. Here the multi-grid method is applied to confirm the efficiency for the S103 ship model by solving the Navier-Stokes equation for the turbulent flows. According to the computational result approximately 30% can be improved in the free surface generation, Finally the limiting streamlines show numerical result is similar to the experiment by twin tuft.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.195-199
• /
• 2005

Wave breaking phenomenon near the fore body of a ship is numerically simulated. The ship advance with uniform velocity in calm water. For the simulation, incompressible Navier-Stokes equations and continuity equation are adopted as governing equations. The simulation is carried out in staggered variable mesh system with finite difference method. Marker and Cell(MAC) method and Marker-Density method are employed to track the free surface. Body boundary conditions are satisfied with the adoption of porosity method and no-slip condition on the hull surface. The ship model has a wedge type fore-body, and the computational domain is an appropriate region around the fore-body. The computation results are compared with some experimental results. Also the difference of the free surface tracking methods are discussed.

• 대한기계학회논문집B
• /
• 제24권12호
• /
• pp.1555-1569
• /
• 2000

Numerical simulation of fluid flow with moving free surface has been carried out. For the free surface flow, a VOF(Volume of Fluid)-based algorithm utilizing a fixed grid system has been investigated. In order to reduce numerical smearing at the free surface represented on a fixed grid system, a new free surface tracking algorithm based on the donor-acceptor scheme has been presented. Novel features of the proposed algorithm are characterized as two numerical tools; the orientation vector to represent the free surface orientation in each cell and the baby-cell to determine the fluid volume flux at each cell boundary. The proposed algorithm can be easily implemented in any irregular non-uniform grid systems that are usual in finite element method (FEM). Moreover, the proposed algorithm can be extended and applied to the 3-D free surface flow problem without additional efforts. For computation of unsteady incompressible flow, a finite element approximation based on the explicit fractional step method has been adopted. In addition, the SUPG(streamline upwind/Petrov-Galerkin) method has been implemented to deal with convection dominated flows. Combination of the proposed free surface tracking scheme and explicit fractional step formulation resulted in an efficient solution algorithm. Validity of the present solution algorithm was demonstrated from its application to the broken dam and the solitary wave propagation problems.

• 대한조선학회논문집
• /
• 제43권6호
• /
• pp.638-646
• /
• 2006

In this paper a new hull-panel generation algorithm named 'Panel Cutting Method' was developed to solve the flow phenomena around a ship advancing on the free surface with a constant speed. In this algorithm the non-linearity of the free surface boundary conditions was taken into account using the iterative method and the raised panel was used at each iteration step. Numerical calculations were performed to investigate the validity of the developed algorithm using the series $60(C_B=0.60)$ hull The wave resistance coefficients, the wave patterns and the wave heights were compared between the computed and the experimental results at Fn=0.25 and 0.316. The comparison showed good agreement between computation and experiment.